Oxfordshire · England
Bath re-enamelling & resurfacing in Roke, Oxfordshire
Our technicians come to Roke for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- A dull, rough surface that will not come clean
- Worn patches where water runs and sits
What we cannot put right
Not everything can be repaired, and we will tell you before we start. We can’t fix:
- A poorly supported acrylic bath, until it’s firmed up
- A cast iron or steel bath that is cracked right through
- Problems we can’t see until an old finish comes off
Send us pictures and we’ll tell you honestly before booking.
Materials we repair
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
How we handle bath re-enamelling in Roke
A re-enamelled bath looks and feels like a new one, but without the cost and upheaval of a refit. It suits anyone happy with the bathroom apart from the bath. We work on pressed steel baths, basins & shower trays and acrylic baths, and common reasons people get in touch are an original cast iron bath that needs restoring and an outdated colour you’d like to change.
Every repair is covered by a one-year guarantee.
- Location
- Roke (OX10)
- Region
- Oxfordshire
- Warranty
- One year on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Work for landlords and builders
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
Where we work around Roke
Roke is about 7 miles east of Didcot, in Oxfordshire. Anywhere in OX10, we come to you. Roke is one of 443 towns and villages in Oxfordshire we cover. You can also see our page for London, about 44 miles away.
Every address in OX10 is covered, from the main roads to the quietest streets. If you are just outside Roke, we cover Ewelme (2 miles south-east), Brightwell Baldwin (2 miles north-east), Chalgrove (2 miles north), Britwell Salome (3 miles east) and Watlington (4 miles east). Larger places within reach include Oxford (10 miles north-west), Didcot (7 miles west), Abingdon-on-Thames (8 miles west), Thame (9 miles north-east), Wantage (14 miles west) and Henley-on-Thames (11 miles south-east).
Near you in Roke
Our customers here include homes close to Church of St Helen, Wallingford School and Benson Church of England Primary School, among other places. Other landmarks nearby include Aston Martin Heritage Trust Museum (2.4 miles north-west) and Wallingford Castle (2.5 miles south-west). Open spaces near Roke include Wittenham Clumps and Ewelme Watercress Beds.
What affects the price in Roke
Prices start from £350. You’ll know the full cost before booking. We look at:
- Whether it’s a chip, crack, burn or wear
- Whether we combine several jobs
- The colour and finish to match
- How many areas need work
Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it.
Getting a price from pictures
You can usually get a fixed quote without us visiting. To make it quick:
- The material, if you know it
- Something in shot to show the size
- Details of any past repairs
- Daylight if possible, and no flash reflection
Most customers in Roke get their price from photos. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
DIY repairs versus a professional job
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.
What we are called out for in Roke
Enamel’s shine is only skin deep, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.
Send us a photo if you notice any of these:
- A bath that stays dull however much you clean it
- Worn patches where water runs and sits
- Lots of chips and rust spots
- A peeling or bubbling previous coating
Questions to ask before you book
- Whether the colour is mixed to match
- If travel is included in the price
- How long it needs to cure
- A fixed price, and whether VAT is included
Nearby places to Roke
More services for Roke
How the visit works
Your technician turns up at the time we agreed with you and checks the damage against your pictures first. The floor and nearby surfaces are covered before any work starts. Most visits take the best part of a day, and we leave the room as we found it.
- We mask and protect the room and ventilate it.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the next day, the bath is ready.
Getting ready for the visit
- Let us know which floor the room is on
- Avoid using the area for a few hours before we arrive
- Keep children and pets away from the room on the day
Get a quote
To get a price, send a couple of pictures using our quote form or call us. We will say immediately if a repair is the right fix.
Advice
Keeping it looking good
It’s all simple stuff:
- Keep toiletries on a shelf rather than in the bath
- Don’t leave a chip unrepaired
- Stick to gentle, non-abrasive cleaners
- Never use suction bath mats
Wipe the bath dry after use where you can, and rinse off any bath products.
On a worn bath, rust spots keep spreading. Resurfacing before they spread keeps it simpler.
Repair or replace in Roke?
Replacing the bath means a plumber, removing a heavy bath, making good the walls and tiles and several days without a working bathroom. Re-enamelling renews the whole surface without moving it. Our bath re-enamelling starts from £350. Compared with replacing, repairing usually costs far less, because there’s no removal, plumbing or making good. The quote lists exactly what you’re paying for.
Why us?
- Colours mixed by hand to suit your surface
- Everything repaired in place
- We leave the room as we found it
- Most jobs done in one visit
See our pricing or resurfacing vs replacement cost guide.
Roke questions
Is the work guaranteed?
Every repair comes with a one-year guarantee. We’ll explain what it covers when we quote.
Can pets and children be at home?
Yes, as long as they stay out of the room we are working in. We will tell you when the room can be used again.
Do you charge for travel?
Travel is included in the price, with the same prices everywhere we work.
How quickly can you book me in?
That depends on our diary for your area. We will offer you dates when we send your quote.
What does bath re-enamelling cost?
Prices start from £350. Every job gets a fixed price from your photos. Send a close-up and a picture of the entire item with your OX10 postcode.
Will there be a smell?
Some materials have a smell while they’re applied. It clears as the materials cure.
Someone resurfaced my bath and it’s peeling. Can you help?
Normally, yes. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
Can you do the outside of a roll-top?
Yes. Inside and out if you’d like.
About our accreditations · Every repair comes with a one-year guarantee.
