East Sussex · England
Bath Re-enamelling in Broadland Row
We travel to Broadland Row for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.
- Resurfacing from £350
- A roll-top that is seen better days
- A bath that stays dull however much you clean it
Should you replace it?
A replacement often means several trades over several days. Re-enamelling is one technician, usually one day, with the bath back in use the day after. Our bath re-enamelling starts from £350. Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Why book with us
- Colour-matched on site
- Dust sheets down, tidy finish
- No extra charge for your area
- A year’s guarantee on all work
Read our prices page or bath cost comparison.
How we handle bath re-enamelling in Broadland Row
Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. Our repair technicians work on acrylic baths, Victorian roll-tops and cast iron baths, and people most often call us about staining under the taps and around the waste and a coloured bath you want in white.
All of our repairs are guaranteed for twelve months. If something goes wrong with the work, we come back.
- Where
- Broadland Row (TN31)
- County
- East Sussex
- Warranty
- A year, on every repair
- Quote
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
DIY repairs versus a professional job
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Aftercare tips
Looking after the surface is easy, and it makes a real difference:
- Dry the bath after use to stop limescale
- Stick to gentle, non-abrasive cleaners
- Do not leave a chip unrepaired
- A dripping tap should be fixed promptly
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
On a worn bath, rust spots keep spreading and make the job bigger. It’s simpler to resurface before they spread.
Landlord and trade work in Broadland Row
For anyone letting property in or around Broadland Row, we will quote for several properties at once. Send pictures for each one and we’ll price them together.
We regularly work with letting and managing agents. Send the address, pictures and access details and we will arrange it.
FAQs for Broadland Row
Is the work guaranteed?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
What if the damage is worse than the photos show?
Your quote covers the damage in the photos. If there is more, we’ll tell you before starting.
What areas do you cover?
The entire UK, including all of East Sussex. Send your postcode with your photos and we’ll confirm dates.
Will it make a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Can you change the colour of my bath?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
How do I book?
Use the quote form or ring 0345 017 0787, and we will do the rest.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Does the bath have to be removed?
No. We resurface it in place, so nothing else is disturbed.
What bath re-enamelling costs
Resurfacing from £350. You’ll know the full cost before you book. We take into account:
- Previous DIY repairs that have to come out
- Where the damage is and how we get to it
- The material
- Doing more than one item at once
There are no surprise extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Getting a price from photos
We price nearly every job from photos. This is what to send:
- What it’s made of, if you know
- Something in shot to show the size
- A wider photo showing the whole bath
- Daylight if possible, and no flash reflection
You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
About Broadland Row
Broadland Row is about 6 miles north-east of Hastings, in East Sussex. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. We cover 289 places across East Sussex. You can also see our page for London, about 50 miles away.
Postcode districts we cover here: TN31. That includes homes on Hundredhouse Lane and Udimore Road and the roads around them. Neighbouring places we cover include Broad Oak (1 mile west), Udimore (1 mile east), Beckley Furnace (1 mile north-west), Doleham (2 miles south-west) and Broad Street (2 miles south-east). Within a short drive, we also cover Hastings (6 miles south-west), Bexhill-on-Sea (10 miles south-west), St Leonards (7 miles south-west), Hastings Old Town (6 miles south), Belmont (6 miles south) and Hollington (6 miles south-west).
Around Broadland Row
Locally, our jobs take us to homes close to The Parish Church of St Mary. For rail, the closest station is Doleham station, about 1.9 miles south-west. Well-known places in the area include Conquest Hospital (4.8 miles south-west) and Barn Theatre and Museum (3.7 miles south-west). For a walk, there is Flatropers Wood.
Also near Broadland Row
Other services in Broadland Row
How the visit works
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the job takes a full day, and we finish by cleaning up and talking you through the result.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can normally be used the next day.
Getting ready for the visit
- Have a window or extractor fan available
- Let us know about parking or access
- Clear toiletries, mats and anything else from around the area
Ask for a price
Getting a price is easy: snap the damage close up and then the entire item, send them over with your postcode, and we’ll reply with a fixed quote. There’s no charge for the quote and no obligation.
Read more
Materials and what they mean for the repair
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is what we repair.
When a repair is not the answer
A few problems are outside what a surface repair can do:
- A metal bath with a through crack
- Acrylic that moves when you stand in it
- Holes rusted through the metal
Not sure? Send pictures and we’ll give you a straight answer.
Materials we repair
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
About our accreditations · Every repair comes with a one-year guarantee.
