Kirklees · England

Bath Re-enamelling for Brockholes homes

Full bath re-enamelling and resurfacing for homes and businesses in Brockholes and across Kirklees. Send pictures for a free, fixed quote.

  • Resurfacing from £350
  • Lots of chips and rust spots
  • A peeling or bubbling previous coating
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling in Brockholes

DIY repairs versus a professional job

If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.

Bath re-enamelling at your home in Brockholes

When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. There’s no removal, plumbing or tiling involved. Whether it’s stains that won’t shift and lots of chips and rust spots, we can generally put it right, on basins & shower trays, Victorian roll-tops and cast iron baths alike.

Every repair comes with our one-year guarantee.

Where
Brockholes (HD9)
County
Kirklees
Cover
One year on every repair
Price
From £350. Free and fixed, from your photos
Call
0345 017 0787
Page updated
23 October 2026
Basin with yellowed glaze resurfaced to a clean white finish

Materials and what they mean for the repair

Cast iron

Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.

Pressed steel

Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.

What affects the price in Brockholes

Prices start from £350. We don’t charge extra for travel to Brockholes. The price depends on:

  • Whether we combine several jobs
  • What kind of damage it is
  • Where the damage is and how we get to it
  • What the surface is made of

We do not add extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.

Getting a price from photos

Almost every job we do is priced from pictures. This is what we need:

  • A picture taken from further back
  • A coin or ruler next to the damage for scale
  • Whether it’s been repaired or coated before
  • Any details about the material

Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can price the job.

About Brockholes

Brockholes is about 4 miles south of Huddersfield, in Kirklees. We travel to clients in Brockholes, so nothing has to leave your home. We cover all 189 towns and villages across Kirklees, from the larger towns to small villages. Our nearest city page is Leeds, about 17 miles away.

Jobs in HD9 work the same way as everywhere else we cover. Local streets include Robin Rocks, Quarry Close and New Mill Road. Other places close to Brockholes include Thongsbridge (1 mile south), Thurstonland (1 mile east), Lydgate (1 mile south), Wooldale (1 mile south) and Netherthong (1 mile south-west). Larger places within reach include Huddersfield (4 miles north), Dewsbury (9 miles north-east), Batley (10 miles north-east), Mirfield (7 miles north-east), Liversedge (9 miles north) and Cleckheaton (9 miles north).

Local landmarks in Brockholes

Around Brockholes, we work in homes near Church of St George, Thurstonland Endowed Voluntary Controlled First School and Holmfirth High School, among other places. There’s a railway station in Brockholes itself: Brockholes station. Nearby you’ll also find Last Of The Summer Wine Exhibition (1.9 miles south-west) and Storthes Hall Hospital (2.1 miles north-east). Green spaces nearby include Castle Hill.

Map of Brockholes © OpenStreetMap contributors

Common problems we fix in Brockholes

Enamel wears gradually. Years of cleaning, hard water and hot baths dull the surface, typically first under the taps and around the waste.

Signs it’s time to call us include:

  • Worn patches where water runs and sits
  • An original cast iron bath that needs restoring
  • Enamel that is lost its shine and feels rough
  • A coating lifting around the plughole

What your quote should include

  • Whether cleaning and preparation are in the price
  • Is the price fixed, and does it include VAT?
  • How long the guarantee is and what it covers
  • Whether there are any call-out or travel charges

Our hiring checklist

How to care for the repair

A little care keeps the finish looking good. Our advice:

  • Dry the bath after use to stop limescale
  • A dripping tap should be fixed promptly
  • Clean with a soft cloth and mild detergent
  • Don’t use the bath until it has fully cured

The first few days matter most: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.

Rust spots on a worn bath get worse with time. Resurfacing before they spread keeps it simpler.

How the visit works

We work cleanly and quietly, so you can carry on at home. We protect the area first, then the job itself takes the best part of a day. At the end we talk you through the curing time and the aftercare.

  1. We check the bath and agree the finish with you.
  2. Taps, tiles and the floor are masked off.
  3. The bath is degreased, repaired and keyed.
  4. We apply the primer and then the finish coats.
  5. The masking comes off, we tidy up and tell you when it can be used.

How to prepare

  • Let us know about parking or access
  • Ensure the area is dry
  • Plan for the room to be out of bounds to pets and children

Getting a price

Pricing is simple: take a close-up of the damage and a picture from further back, send them over with your postcode, and you’ll get a fixed quote back. There is no charge for the quote and no obligation.

Send photos for a quote

Read more

Repair or replace in Brockholes?

Replacing a bath usually involves a plumber, a fitter and a tiler. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Resurfacing from £350, with every job priced individually. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.

Why book with us

  • Dust sheets down, tidy finish
  • We come to you, anywhere in the UK
  • CHAS, Constructionline and SafeContractor accredited
  • Usually one visit, start to finish

Read our pricing and bath cost comparison.

Questions from Brockholes

How long does re-enamelling last?

It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.

Someone resurfaced my bath and it’s peeling. Can you help?

In most cases. The old coating comes off before we resurface it. Mention it when you send pictures.

Can you change the colour of my bath?

Yes, white is the usual choice. Mention the colour you want when you send photos.

Can tenants book a repair?

Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged.

How do I book?

Use the quote form or ring 0345 017 0787, and we will do the rest.

Can pets and children be at home?

On the day, the room should be kept clear of pets and children, so the repair isn’t disturbed while it cures.

Is repairing better than replacing?

Normally, when the rest is in good condition. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.

Can I get a quote without a visit?

Typically, yes. A close-up and a wider photo are enough to give a fixed price.

What a repair can’t fix

Some problems need a builder, plumber or fitter rather than us:

  • A bath split right through the body
  • Steel that has corroded right through
  • Acrylic that moves when you stand in it

If in doubt, send pictures and we will say what we think.

Materials we repair

  • Victorian roll-tops
  • Basins & shower trays
  • Acrylic baths
  • Cast iron baths
  • Pressed steel baths
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.