North Ayrshire · Scotland
Bath Re-enamelling in Brodick
Full bath re-enamelling and resurfacing in Brodick, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Staining under the taps and around the waste
- A peeling or bubbling previous coating
What affects the price in Brodick
Resurfacing from £350. Prices are worked out job by job, from your pictures. The main factors are:
- The type of damage
- How easy the damage is to reach
- How many areas need work
- The colour and finish to match
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.
How to get a fixed quote
You can take the photos on your phone, there is no need for anything special. Make sure they show:
- Any details about the material
- Daylight if possible, and no flash reflection
- A close-up of the damage, in focus
- Your postcode, so we can check dates
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed price.
Bath re-enamelling at your home in Brodick
If your bath is sound but looks tired, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. Whether it’s a bath in a colour that no longer suits and a bath that stays dull however much you clean it, we can usually put it right.
Your repair is guaranteed for a year, as with every job we do.
- Location
- Brodick (KA27)
- Area hub
- North Ayrshire
- Warranty
- One year on every repair
- Price
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Why repair rather than replace?
For a sound bath, resurfacing costs far less than replacement, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Prices start from £350. Our prices are the same across the UK, with no extra for Brodick. What changes the price is the job itself: how much damage, what it’s made of and how many items.
What you get with us
- Fixed prices from your photos
- Honest advice, even when it means no job
- Same prices wherever you are
- One-year guarantee on every repair
Read our prices page and guide to resurfacing and replacement costs.
Our work in Brodick
Brodick is about 15 miles west of Saltcoats, in North Ayrshire. Across the KA27 area, a technician comes to you. We cover 53 places across North Ayrshire. Our nearest city page is Glasgow, about 39 miles away.
Here we cover the KA27 postcode area. Whether you live on Market Road, Cora Linn Court and Manse Road or a nearby road, we can come to you. We also travel to Strathwhillan (1 mile east), Lamlash (3 miles south-east), Cordon (3 miles south), Corrie (4 miles north) and Pien (7 miles south-west). Further out, we also cover Saltcoats (15 miles east), Ardrossan (14 miles east), West Kilbride (14 miles north-east), Auchenharvie (15 miles east) and Millport (15 miles north-east). Some remote addresses need extra planning, so it’s best to call first.
Landmarks near Brodick
Around Brodick, we work in homes near Parish Church and the streets around them. Other landmarks nearby include Arran War Memorial Hospital (2.7 miles south-east) and Brodick Castle (1.2 miles north). Green spaces nearby include Àrd Bheinn and Loch Nuis.
Keeping it looking good
After the repair has cured, a few habits help it last:
- A quick wipe after use keeps limescale away
- Clean with a soft cloth and mild detergent
- Leave the bath for the full curing time before using it
- Repair dripping taps early
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
Leave a peeling coating alone. Water gets under it and the damage spreads, so have it stripped and resurfaced.
Work for landlords and builders
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
How the visit works
When we visit, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take the best part of a day. We tidy up before we leave and tell you when it’s ready to use.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- Once cured, normally by the following day, the bath is ready.
Preparing for the visit
- Open a window if you can
- Tell us if there are stairs or a lift
- Mention any earlier repairs or resurfacing
How to get a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them over. What comes back is a fixed price, not a guess.
Related advice
Questions from Brodick
Can you re-enamel a roll-top bath?
Yes. We can do the inside and outside if you’d like.
Will there be fumes?
Yes, while we are applying the finish. We set up ventilation and the smell fades as it cures.
How durable is a resurfaced bath?
Care for it and it lasts. Gentle cleaning, no suction mats.
Is a repair better than a new one?
Normally, if the item is otherwise sound. A repair avoids removal and making good. If replacing would be better, we’ll say so.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
How quickly can you book me in?
Your quote comes with available dates. Tell us if you need it done quickly.
It’s been repaired before. Can you still fix it?
In most cases. The old repair comes out first, so let us know about it.
How do I get a price for bath re-enamelling in Brodick?
Prices start from £350. The exact price depends on the damage, so we quote from pictures. You’ll get a fixed figure before you book.
Should I try a DIY kit first?
If you do try a kit, read the instructions carefully, and give it the full curing time. If it fails, we can still put it right.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
Places near Brodick
What else we do in Brodick
When a repair is not the answer
We won’t take on work that won’t last, so these are the limits:
- A cast iron or steel bath that is cracked right through
- Plumbing leaks, which need a plumber
- A poorly supported acrylic bath, until it’s firmed up
Send us photos and we’ll tell you honestly.
Surfaces we repair
- Cast iron baths
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
What your bath is made of matters
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. The bath needs to be firm and well supported.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
About our accreditations · Every repair comes with a one-year guarantee.
