North Ayrshire · Scotland
Bath Re-enamelling in Millport
Bath re-enamelling for Millport, without a refit. Get a fixed quote from your pictures, then book a visit.
- Resurfacing from £350
- A coloured bath you want in white
- Staining under the taps and around the waste
How to look after the repair
Aftercare is simple, and it makes a real difference:
- Fix dripping taps quickly
- Use washing-up liquid and a soft cloth
- Do not use the bath until it has fully cured
- Keep toiletries on a shelf rather than in the bath
Stick to mild, non-abrasive cleaners, do not use suction bath mats, and don’t leave bottles or razors standing on the surface.
Worn enamel only gets rougher with time, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
About our bath re-enamelling in Millport
After re-enamelling, the bath has a smooth, glossy, new-looking surface, but without the cost and upheaval of a refit. It’s ideal if you like your bathroom but not the state of the bath. We regularly repair basins & shower trays, acrylic baths and pressed steel baths, and common reasons people get in touch are a bath that stays dull however much you clean it and a coating lifting around the plughole.
Big or small, it’s backed by a one-year guarantee in Millport and across North Ayrshire.
- Location
- Millport (KA28)
- County
- North Ayrshire
- Cover
- A year, on every repair
- Price
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Where we work around Millport
Millport is about 9 miles north-west of Saltcoats, in North Ayrshire. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Millport is one of 53 towns and villages in North Ayrshire we cover. Our jobs stretch from Millport to Glasgow (about 26 miles away).
Our repair technicians cover all of KA28 and the streets around it. Streets in the area include George Street, Craig-en-Ros Road and Glasgow Street, and we cover them all. Millport sits on or near the B896 and B899, which makes travel easy. Neighbouring places we cover include Fairlie (3 miles east), Largs (4 miles north-east), Kingarth (4 miles west), West Kilbride (5 miles south-east) and Seamill (5 miles south-east). Within a short drive, we also cover Irvine (14 miles south-east), Kilwinning (11 miles south-east), Saltcoats (9 miles south-east), Ardrossan (8 miles south-east), Stevenston (10 miles south-east) and Kilbirnie (9 miles east). If you are somewhere remote, call first so we can plan the visit.
Landmarks near Millport
Locally, our jobs take us to homes close to Great Cumbrae Island. The closest station to Millport is Fairlie station, about 2.7 miles east of the centre. Further afield, we also cover the area around Lady Margaret Hospital (0.5 miles north) and Museum Of The Cumbraes (under half a mile west). Green spaces nearby include Goldenberry Hill.
Also in Millport
What bath re-enamelling costs
Prices start from £350. A fixed quote means you know the cost before you book. We take into account:
- How easy the damage is to reach
- Whether old repairs or coatings need taking off
- What kind of damage it is
- How many areas need work
We do not add extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Getting a price from pictures
Most quotes are done from photos alone. To help us price it:
- Any details about the material
- The postcode, so we can plan the visit
- Good light, ideally daylight, without flash glare
- Any earlier repairs or coatings
We price from photos so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.
Common problems we fix in Millport
Enamel wears gradually. Years of cleaning, hard water and hot baths wear the gloss away, starting where water runs and sits.
It’s worth getting a quote if you see:
- A roll-top that’s seen better days
- An old resurfacing that is failing
- Lots of chips and rust spots
- An outdated colour you’d like to change
Comparing quotes
- What the guarantee covers, and for how long
- If travel is included in the price
- Who turns up on the day
- A fixed price, and whether VAT is included
Honest limits
A few problems are outside what a surface repair can do:
- Holes rusted through the metal
- Plumbing leaks, which need a plumber
- A poorly supported acrylic bath, until it’s firmed up
If in doubt, send photos and we’ll say what we think before you book.
Materials we work on in Millport
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
Repairing versus replacing in Millport
When the bathroom is fine apart from the bath’s finish, resurfacing is the simplest answer. Nothing else is disturbed. Our bath re-enamelling starts from £350. Set against the cost of replacement, repairing usually costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Why Millport clients choose us
- Same prices wherever you are
- Colours mixed by hand to suit your surface
- We come to you, anywhere in the UK
- Every repair guaranteed for a year
Take a look at our prices page or resurfacing vs replacement cost guide.
Materials and what they mean for the repair
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. It must be solid and not flex underfoot.
The process
You do not need to empty the room beforehand. Everything we use comes in the van with us, lay protective sheets and get going once we’ve agreed what we’re doing. Most jobs take the best part of a day, and you can get on with other things while we’re there.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- We leave it to cure, and it’s typically ready the day after.
Getting ready for the visit
- Let the surface dry out before the visit
- Let us know about parking or access
- Keep a parking space free if you can
Getting a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them over. You’ll get a fixed quote, not an estimate.
Read more
Can I fix it myself?
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Questions from Millport
Do you come to Millport?
Yes. We work across the UK and travel to Millport and the rest of North Ayrshire. Send us photos for a fixed quote, or call 0345 017 0787.
Can you re-enamel a roll-top bath?
Yes. We can do the inside and outside if you’d like.
What happens once I’ve sent photos?
You will get a fixed quote back, plus dates. There is no obligation to book.
How do I book?
Just pictures, your postcode and a contact number. On the day, access to the room.
How do I get a price for bath re-enamelling in Millport?
Resurfacing from £350. Because every job differs, we price from pictures. You’ll get a fixed figure before booking.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Is there any odour?
It depends on the job, but frequently a little. Open windows and an extractor fan help.
Can you redo someone else’s repair?
Most of the time. Tell us what was done before and we’ll plan for it.
About our accreditations · Every repair comes with a one-year guarantee.
