Neath Port Talbot · Wales
Bath Re-enamelling in Brombil
Damaged bath in Brombil? We put it right where it is, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- Wear marks under the taps
- An original cast iron bath that needs restoring
Bath re-enamelling in Brombil, done in place
We don’t move the bath, so your taps, tiles and plumbing are left alone. It generally takes one visit, with the bath ready to use the following day. Typical jobs include a peeling or bubbling previous coating and a dull, rough surface that won’t come clean, in cast iron baths, acrylic baths and basins & shower trays.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before you book.
- Location
- Brombil (SA13)
- Region
- Neath Port Talbot
- Cover
- One year on every repair
- Quote
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Repair or replace in Brombil?
If the bath is sound, re-enamelling is typically much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Resurfacing from £350, with every job priced individually. Set against the cost of replacement, repairing typically costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
Why book with us
- One-year guarantee on every repair
- Honest advice, even when it means no job
- Most jobs done in one visit
- Everything repaired in place
Take a look at our full price list and resurfacing vs replacement cost guide.
How to look after the repair
A little care keeps the finish looking good. We recommend:
- Avoid suction-cup mats
- Don’t leave a chip unrepaired
- Keep toiletries on a shelf rather than in the bath
- Clean with a soft cloth and mild detergent
The first few days matter most: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further and makes resurfacing more work.
Common problems we fix in Brombil
In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.
Contact us if you’ve noticed:
- Lots of chips and rust spots
- Stains that will not shift
- Thin, worn enamel in places
- A period or roll-top bath worth keeping
Comparing quotes
- What the guarantee covers, and for how long
- What aftercare is recommended
- If travel is included in the price
- Whether they match the colour on site
Landlord and trade work in Brombil
We’re used to working with agents and managing companies. Just send pictures, the address and how to get access.
If you manage property in Brombil, we can repair and quote for several addresses together. Just send pictures for each address and we will come back with a combined price.
When we’d advise against a repair
We won’t take on work that won’t last, so here’s what a repair cannot put right:
- An acrylic bath that flexes badly underfoot
- Plumbing leaks, which need a plumber
- Problems we cannot see until an old finish comes off
Send us photos and we’ll tell you honestly.
Surfaces we repair
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
About Brombil
Brombil is about 3 miles south-east of Port Talbot, in Neath Port Talbot. We agree a date that works for you, and you’ll know when to expect us, so there is no waiting around. Our repair technicians cover all 100 towns and villages in Neath Port Talbot, from the larger towns to small villages.
We work across SA13. That includes homes on College Green, Abbott's Close and Ty'r-Groes Drive and the roads around them. Neighbouring places we cover include Margam (1 mile south-east), Tai-Bach (1 mile north), Cwrt-y-defaid (1 mile south-east), Margam Moors (1 mile west) and Taibach (2 miles north-west). Within a short drive, we also cover Neath (7 miles north-west), Port Talbot (3 miles north-west), Sandfields (3 miles north-west), Mount Pleasant (6 miles north-west), Baglan Moors (4 miles north-west) and Sandfields West (4 miles north-west).
Local landmarks in Brombil
Our customers here include homes close to Twelve Knights pub, Dyffryn School and Hen Eglwys. The nearest railway station is Port Talbot Parkway station, about 2.2 miles north-west. Well-known places in the area include Neath Port Talbot Hospital (3.1 miles north-west) and Margam Castle (1 mile south-east). Not far away are Kenfig Burrows slack and Graig Fawr.
Different materials, different repairs
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s what we repair.
What we do, step by step
On the day itself, there is little for you to do. Show us the job, point us to the room, and we’ll get on with it. Most visits take a full day, including clearing up.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Make sure the area is dry
- Keep a parking space free if you can
- Have a window or extractor fan available
Getting a price
We price from pictures so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.
Read more
Places near Brombil
What else we do in Brombil
Brombil: your questions answered
Is there a smell?
Some odour is normal while we spray, which is why we ventilate the bathroom. It fades as the coating cures.
Can pets and children be at home?
We ask you to keep children and pets out of the room while we work. The rest of the house is unaffected.
Can I add another job to the visit?
Yes, and it’s frequently cheaper. Just add the extra items to your pictures and we’ll quote them together.
Can you change the colour of my bath?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
Do I have to be there?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
How quickly can you book me in?
It depends on the time of year and where you are. Send photos with your postcode and we will reply with the earliest dates.
How long is the bath unusable?
One day for most baths and can be used the day after. We give you timings with the quote.
Will the price change on the day?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
DIY kit or professional repair?
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
About our accreditations · Every repair comes with a one-year guarantee.
