Neath Port Talbot · Wales
Bath Re-enamelling for Tai-Bach homes
Full bath re-enamelling and resurfacing in Tai-Bach, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Several chips and rust patches
- Enamel that’s lost its shine and feels rough
Bath re-enamelling in Tai-Bach without replacing anything
Resurfacing renews the entire surface of the bath without taking anything out. It’s the answer when the entire bath is tired rather than one spot. We are frequently asked to fix a bath that stays dull however much you clean it and a bath in a colour that no longer suits, on Victorian roll-tops, cast iron baths and basins & shower trays.
A one-year guarantee comes as standard, so you’re covered after the visit.
- Where
- Tai-Bach (SA13)
- Area hub
- Neath Port Talbot
- Warranty
- One year on every repair
- Quote
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What your bath is made of matters
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Steel often rusts by the plughole, so we pay close attention there.
When a repair is not the answer
Some jobs aren’t right for a repair, including:
- Anything hidden under an old coating, until we remove it
- Plumbing leaks, which need a plumber
- Acrylic that moves when you stand in it
If in doubt, send pictures and we’ll say what we think before you book.
What we work on
- Acrylic baths
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
Aftercare tips
Aftercare is simple:
- Stick to gentle, non-abrasive cleaners
- Fix dripping taps quickly
- Don’t let dyes or oils sit on the finish
- Don’t use the bath until it has fully cured
Dry the bath after use if possible, particularly with hard water, and rinse away any product left on the surface.
Rust spots on a worn bath get worse with time and make the job bigger. It’s simpler to resurface before they spread.
Questions from Tai-Bach
Do you work for landlords and businesses?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Are you a vetted contractor?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can you change the colour of my bath?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
I rent my home. Can I book you?
Yes. Check with your landlord; we can send the quote to them too.
Can you do the outside of a roll-top?
Yes, frequently. The inside is resurfaced, and we can refinish the outside as well.
Is it worth repairing rather than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.
How much does bath re-enamelling cost in Tai-Bach?
Resurfacing from £350. Every job gets a fixed quote from your photos. Send a close-up and a picture of the whole item with your SA13 postcode.
What areas do you cover?
Everywhere in the UK, Tai-Bach included. There is no extra charge for travel.
How it works
A typical visit goes like this: we arrive on time, sheet and mask the area around the job, do the job and clear up. Plan for most of the day. Before leaving, we tell you when it can be used and what to avoid for the first few days.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the following day.
Getting ready for the visit
- Avoid using the area for a few hours before we arrive
- Clear toiletries, mats and anything else from around the area
- Tell us about parking, stairs or access
How to get a price
Most clients in Tai-Bach get their price from pictures. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
Advice
Common problems we fix in Tai-Bach
Previous coatings can fail too, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
Signs it’s time to call us include:
- An original cast iron bath that needs restoring
- A bath that stays dull however much you clean it
- A coating lifting around the plughole
- Wear marks under the taps
Before booking anyone
- How long it needs to cure
- The length of the guarantee and what it covers
- What happens if the damage is worse than the photos show
- What protection goes down before work starts
Prices and what affects them
Resurfacing from £350. Each job gets its own fixed price. These are the things that affect it:
- The size and number of damaged areas
- The material and finish
- How many items we do on one visit
- Whether it’s a chip, crack, burn or wear
What it costs depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. You get a fixed quote from your pictures, so there are no surprises on the day.
Quotes from your photos
Phone pictures are fine, there is no need for anything special. Just make sure we can see:
- A close-up of the damage, in focus
- Natural light rather than flash
- Details of any past repairs
- Your postcode, so we can check dates
We price from photos so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
More services for Tai-Bach
For landlords and businesses
Builders use us to fix snagging damage before handover. Several plots can be done in one visit to keep costs down.
We work for landlords, letting agents and housing providers in Tai-Bach as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
DIY repairs versus a professional job
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
Our work in Tai-Bach
Tai-Bach is about 2 miles east of Port Talbot, in Neath Port Talbot. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Tai-Bach is one of 100 places in Neath Port Talbot where we work.
We cover every part of SA13 and the streets around it. Local streets include Goytre Road, Goytre Close and Parc Pen-y-Bryn. Other places close to Tai-Bach include Goytre (1 mile north-west), Taibach (1 mile west), Pen-y-cae (1 mile north-west), Brombil (1 mile south) and Felindre (2 miles north-west). We also work in nearby towns such as Neath (6 miles north-west), Sandfields (3 miles west), Mount Pleasant (5 miles north-west), Baglan Moors (3 miles north-west), Sandfields West (3 miles west) and Sandfields East (3 miles west).
What’s near Tai-Bach
Locally, our jobs take us to homes close to Dyffryn School, Eastern Primary School and Somerset Arms, among other places. Tai-Bach’s nearest station is Port Talbot Parkway station, about 1.6 miles west. Well-known places in the area include Castell Gwern (1.8 miles north) and Neath Port Talbot Hospital (2.5 miles west). Green spaces nearby include Mynydd Emroch - Craig Emroch and Kenfig Burrows slack.
About our accreditations · Every repair comes with a one-year guarantee.
