Kent · England
Bath re-enamelling & resurfacing in Brook, Kent
We travel to Brook for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- Brown or grey marks that don’t clean off
- An original cast iron bath that needs restoring
What affects the price in Brook
Resurfacing from £350. There’s no area surcharge for Brook. The price reflects:
- How easy the damage is to reach
- The size and number of damaged areas
- The material
- The colour and finish to match
Rather than charging by the hour, we price the whole job up front. It depends on the damage, the material and access.
How to get a fixed price
Two or three clear pictures are generally enough. It helps if you send:
- One picture of the entire bath
- Good light, ideally daylight, without flash glare
- Any earlier repairs or coatings
- Where you are, by postcode
Getting a price is easy: take a close-up of the damage and a photo from further back, send them to us with your postcode, and you will get a fixed price back. Quotes are free and you’re under no obligation.
Bath re-enamelling at your home in Brook
Many of the baths we re-enamel are period roll-tops, which are heavy, hard to move and costly to replace. Resurfacing them in place keeps the original bath. We’re often asked to fix worn patches where water runs and sits and a period or roll-top bath worth keeping, in Victorian roll-tops, acrylic baths and cast iron baths.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Where
- Brook (TN25)
- Region
- Kent
- Guarantee
- A year, on every repair
- Price
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Other services in Brook
About Brook
Brook is about 4 miles east of Ashford, in Kent. Our technicians come to homes and businesses in Brook, so there’s no workshop to go to. Brook is one of 922 towns and villages in Kent we cover. Our jobs stretch from Brook to London (about 51 miles away).
We work across the TN25 postcode area. We regularly work on streets such as The Street, Troy Town Lane and Stonebridge and the roads around them. Close by, we cover Folly Town (1 mile east), Wye (2 miles north-west), Hinxhill (2 miles south-west), Hastingleigh (2 miles east) and Hassell Street (2 miles north-east). We also work in nearby towns such as Ashford (4 miles west), Canterbury (10 miles north-east), Dover (15 miles east), Folkestone (11 miles south-east), Whitstable (14 miles north) and Faversham (11 miles north).
Near you in Brook
In Brook, that means homes near Church of St Mary, Brook Community Primary School and Wye School. For rail, the closest station is Wye station, about 2 miles north-west of the centre. Further afield, we also cover the area around William Harvey Hospital (2.4 miles south-west) and County Square (3.9 miles west). The countryside around Brook includes Hatch Park.
Can I fix it myself?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
If you’re set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
Do you need bath re-enamelling in Brook?
A dull surface stains and holds dirt, and scrubbing it wears it down further. At that stage, resurfacing is the fix.
Contact us if you’ve noticed any of these:
- A bath in a colour that no longer suits
- A peeling or bubbling previous coating
- Thin, worn enamel in places
- Lots of chips and rust spots
Comparing quotes
- How the room is protected while they work
- Whether cleaning and preparation are in the price
- When it can be used again
- What the guarantee covers, and for how long
How to care for the repair
To keep it looking its best for years:
- Rinse off hair dye, oils and bath bombs immediately
- Do not leave a chip unrepaired
- Leave the bath for the full curing time before using it
- Use washing-up liquid and a soft cloth
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
Worn enamel only gets rougher with time, and any rust spreads underneath. Resurfacing sooner means less repair work first.
FAQs for Brook
Do you do work for letting agents?
Yes, frequently. We can quote for several properties together and work between tenancies.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Does the bath have to be removed?
Not at all. We work on the bath in place, with the room masked and ventilated.
Can you do the outside of a roll-top?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
Can tenants book a repair?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
Can you change the colour of my bath?
Yes, white is the usual choice. Mention the colour you want when you send pictures.
What areas do you cover?
Everywhere in the UK, Brook included. There is no extra charge for travel.
When can you do it?
It depends on the time of year and where you are. We will offer you dates when we send your quote.
What your bath is made of matters
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s what we repair.
How the visit works
Once we are through the door, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the work takes most of the day, and we finish with a tidy-up and a look at the finished work together.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s typically ready the next day.
Getting ready for the visit
- Plan for the room to be out of bounds to pets and children
- Have somewhere for us to park nearby if possible
- Let us know if it has been repaired before
Ask for a price
If you are in Brook and want a price, photos are the quickest way: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
Advice
Repair or replace: which is better?
Replacing the bath means a plumber, removing a heavy bath, making good the walls and tiles and several days without a working bathroom. Resurfacing gives the bath a new finish with the bath left where it is. Our bath re-enamelling starts from £350. Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
Why Brook customers choose us
- We come to you, anywhere in the UK
- Straight answers about what a repair can do
- Dust sheets down, tidy finish
- Colour mixed on the day to match
Take a look at our full price list or resurfacing vs replacement cost guide.
What we can’t put right
We will not take on work that won’t last, so here’s what a repair can’t put right:
- An acrylic bath that flexes badly underfoot
- A metal bath with a through crack
- Leaks from fittings rather than the bath
Not sure? Send photos and we’ll give you a straight answer.
What we work on
- Cast iron baths
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
About our accreditations · Every repair comes with a one-year guarantee.
