Essex · England
Bath re-enamelling & resurfacing in Brook Street, Essex
Damaged bath in Brook Street? We repair it in place, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- Worn patches where water runs and sits
- A bath that stays dull however much you clean it
How we handle bath re-enamelling in Brook Street
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. We regularly repair acrylic baths, cast iron baths and pressed steel baths, and people most frequently call us about several chips and rust patches and stains that won’t shift.
You are covered for a year from the day of the repair. If anything isn’t right, ring us and we’ll come back.
- Location
- Brook Street (CM14, RM3)
- Region
- Essex
- Cover
- One year on every repair
- Quote
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Covering Brook Street
Brook Street is about 2 miles south-west of Brentwood, in Essex. We visit customers in Brook Street and nearby villages, so nothing has to leave your home. Brook Street is one of 644 places in Essex where we work. Our nearest city page is London, about 18 miles away.
Every address in CM14 and RM3 is within our area, from the main roads to the quietest streets. Jobs here include addresses on River Road, Brook Road and Spital Lane and the roads around them. Other places close to Brook Street include South Weald (1 mile north), Harold Park (1 mile south-west), Harold Hill (2 miles west), Noak Hill (2 miles west) and St Vincent's Hamlet (2 miles north-west). Within a short drive, we also cover Chelmsford (13 miles north-east), Basildon (8 miles east), Harlow (13 miles north-west), Canvey Island (15 miles south-east), Billericay (7 miles east) and Rayleigh (14 miles east).
Near you in Brook Street
Around Brook Street, we work in homes near Holly Trees Primary School, The Bull Inn and Church of St Peter, among other places. You’ll also find Weald Country Park (1.2 miles north), Drapers' Academy (1.4 miles west) and King's Wood School (1.4 miles west). The nearest railway station is Brentwood station, roughly 1.2 miles east. A little further out are Upminster Tithe Barn Museum of Nostalgia (3.1 miles south) and Spire Hartswood Hospital (1.1 miles south-east). For a walk, there’s Warley Place.
Common questions in Brook Street
Do you work in Brook Street?
We do. Technicians travel to Brook Street from across the region, with no extra charge for travel.
Do you need to take the bath out?
No, it stays where it is. Everything is done in your bathroom, with the room masked and ventilated.
Will the new finish last?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.
Can I get a quote without a visit?
In nearly every case. If pictures don’t show enough, we will ask for another angle.
What does bath re-enamelling cost?
Prices start from £350. We give a fixed price based on photos of the damage. Send a close-up and a picture of the entire item and your postcode.
Do you work for landlords and businesses?
We do, regularly. We can quote for several properties together and work between tenancies.
What happens once I’ve sent pictures?
We check the damage, the material and your postcode, then reply with a quote with dates.
Will the price change on the day?
If we find something the photos didn’t show, we explain it first. The price only changes if you agree.
Prices and what affects them
Resurfacing from £350. Every quote is fixed and free. What we look at:
- Access to the area
- Unusual colours or finishes
- Doing more than one item at once
- Whether it’s a chip, crack, burn or wear
No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
How to get a fixed quote
Good photos mean an accurate price. Here’s what helps:
- Details of any past repairs
- Any details about the material
- A wider photo showing the entire bath
- A coin or ruler next to the damage for scale
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, add your postcode and send them over. What comes back is a fixed quote, not a guess.
Landlord and trade work in Brook Street
We regularly work with letting and managing agents. Send the address, photos and access details.
If you manage property in Brook Street, we will quote for several properties at once. Send photos for each one and we will price them together.
What we do, step by step
There’s not much you need to do on the day. Let us in and show us the room, and we will take it from there. The job generally runs to a full day.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the day after.
Before we arrive
- Ensure the room can be ventilated
- Keep a parking space free if you can
- Mention any parking restrictions or tricky access
Get a quote
To get a price, send a couple of photos through our quote form or call us. We’ll tell you honestly if a repair is the right fix.
Advice
DIY kit or professional repair?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
Aftercare tips
Much of the damage we repair could have been avoided. A few tips:
- A quick wipe after use keeps limescale away
- Clean with a soft cloth and mild detergent
- Do not leave bottles, razors or sponges standing on the surface
- Have chips seen to early
Wipe the bath dry after use where you can, and rinse away any product left on the surface.
If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
What we cannot put right
We will not take on work that will not last, so here’s what a repair can’t put right:
- A poorly supported acrylic bath, until it’s firmed up
- A bath split right through the body
- A bath that is rusted through
Send us photos and we will tell you honestly before booking.
Materials we work on in Brook Street
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
Nearby places to Brook Street
What else we do in Brook Street
What your bath is made of matters
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
What we are called out for in Brook Street
Enamel wears gradually. Abrasive cleaners, limescale and years of use dull the surface, usually first under the taps and around the waste.
Contact us if you’ve noticed:
- An outdated colour you’d like to change
- Chips and rust in more than one place
- Stains that will not shift
- A period or roll-top bath worth keeping
Comparing quotes
- What prep work is covered
- What happens if the damage is worse than the pictures show
- How long the guarantee is and what it covers
- A fixed quote, and whether VAT is included
About our accreditations · Every repair comes with a one-year guarantee.
