Cheshire East · England
Bath re-enamelling & resurfacing in Brookhouse, Cheshire East
Problem with your bath in Brookhouse? We repair it in place, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- Chips and rust in more than one place
Bath re-enamelling in Brookhouse without replacing anything
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, after the bath has been cleaned, repaired and keyed. Typical jobs include worn patches where water runs and sits and a period or roll-top bath worth keeping, in cast iron baths, basins & shower trays and pressed steel baths.
We guarantee the work for a year. If something is not right in that time, we come back and put it right.
- Location
- Brookhouse (SK10)
- Region
- Cheshire East
- Warranty
- One year on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Can I fix it myself?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
What we can’t put right
We won’t take on work that won’t last, so here’s what a repair cannot put right:
- A poorly supported acrylic bath, until it’s firmed up
- A bath that is rusted through
- Plumbing leaks, which need a plumber
Send us photos and we’ll tell you honestly before you book.
Materials we repair
- Acrylic baths
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
Should you replace it?
Replacement only makes sense in a few cases: if the bath is cracked through, if you want a different size or shape, or if you’re refitting the whole room anyway. Otherwise, resurfacing generally wins. Our bath re-enamelling starts from £350. Compared with replacing, a repair is usually a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Why Brookhouse clients choose us
- Work done at your home or business
- Same prices wherever you are
- No need to remove anything
- A fixed quote before you book
Take a look at our full price list or resurfacing vs replacement cost guide.
Common questions in Brookhouse
Someone resurfaced my bath and it’s peeling. Can you help?
Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.
How long will the bath be out of use?
Typically a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
Will the bath be moved?
No, it stays where it is. We work on the bath in place, with the room protected and ventilated.
Can landlords book you?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses.
Can you quote from photos?
Yes, almost always. Clear photos let us give you a fixed price without visiting.
Do you work in Brookhouse?
Yes. We cover the entire UK and come to Brookhouse and the rest of Cheshire East. Send pictures and we will quote, or call 0345 017 0787.
How quickly can you book me in?
Your quote comes with available dates. If it’s urgent, say so and we will do what we can.
Can you repair several things at once?
Yes. Doing several items on one visit typically costs less than separate visits. Include pictures of each item.
Work for landlords and builders
We regularly work with letting and managing agents. Send the address, pictures and access details and we’ll handle the rest.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Brookhouse and nearby
Brookhouse is about 2 miles north-east of Macclesfield, in Cheshire East. Anywhere in SK10, we carry out the work at your property. We cover 254 places across Cheshire East. We work right across the region, from Brookhouse to Manchester (15 miles away).
Here we cover the SK10 postcode area. From Hawkins Lane, Ravenho Lane and Penny Lane or a nearby road, we can come to you. We also travel to Kerridge-end (1 mile south-west), Rainow (1 mile north-east), Calrofold (1 mile south-west), Kerridge (1 mile north-west) and Walker Barn (1 mile south-east). Further out, we also cover Congleton (9 miles south-west), Wilmslow (7 miles north-west), Knutsford (12 miles west), Sandbach (15 miles south-west), Poynton (5 miles north) and Holmes Chapel (13 miles south-west).
Local landmarks in Brookhouse
In Brookhouse, that means homes near Rainow Primary School, The Robin Hood Inn and Tytherington School, among other places. Nearby too are Victoria Park (1.8 miles south-west) and Holy Trinity Church (less than half a mile north-east). For rail, the closest station is Macclesfield station, about 2 miles south-west. Further afield, we also cover the area around Macclesfield Castle (2.1 miles south-west) and Duke's Court (2.3 miles south-west). The countryside around Brookhouse includes Trentabank Reservoir Nature Reserve and Kerridge Hill.
- Local facilities include Macclesfield (2.2 miles south-west)
Looking after it afterwards
So the finish stays in good condition for years:
- Wash away dyes and oils after use
- Store bottles off the bath
- Never use suction bath mats
- Do not use the bath until it has fully cured
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Nearby places to Brookhouse
Also in Brookhouse
What we are called out for in Brookhouse
Enamel doesn’t fail overnight. Years of cleaning, hard water and hot baths dull the surface, normally first under the taps and around the waste.
The most common problems we are called about are:
- Enamel that is lost its shine and feels rough
- A roll-top that is seen better days
- Staining under the taps and around the waste
- A coating lifting around the plughole
What your quote should include
- Whether cleaning and preparation are in the price
- A fixed quote, and whether VAT is included
- How your room will be protected
- How to look after the finish
Different materials, different repairs
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s what we repair.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
What happens on the day
On the day itself, there is little for you to do. Let us in and show us the room, and we’ll get on with it. Most visits take a full day, including clearing up.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure.
Before we arrive
- Tell us if there are stairs or a lift
- Tell us about parking, stairs or access
- Mention any earlier repairs or resurfacing
How to get a price
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
