Dorset · England
Bath re-enamelling & resurfacing in Broom Hill, Dorset
Full bath re-enamelling and resurfacing for homes and businesses in Broom Hill and across Dorset. Free, fixed quotes from your photos.
- Resurfacing from £350
- A coating lifting around the plughole
- Chips and rust in more than one place
Bath re-enamelling in Broom Hill without replacing anything
Resurfacing renews the entire surface of the bath without taking anything out. It’s the answer when the entire bath is tired rather than one spot. If you are dealing with a dull, rough surface that won’t come clean and brown or grey marks that don’t clean off, we can help, on acrylic baths, pressed steel baths and Victorian roll-tops alike.
Whatever the size of the job, it’s backed by a one-year guarantee.
- Where
- Broom Hill (BH21)
- Region
- Dorset
- Guarantee
- 12 months on all our work
- Price
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
What your bath is made of matters
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Nearby places to Broom Hill
Also in Broom Hill
Covering Broom Hill
Broom Hill is about 2 miles north-east of Wimborne Minster, in Dorset. We travel to homes and businesses in Broom Hill and the surrounding area, so nothing has to leave your home. Broom Hill is one of 462 towns and villages in Dorset where we work.
All of BH21 is covered. If you’re just outside Broom Hill, we cover God's Blessing Green (1 mile north-west), White Moor (1 mile north-east), Pig Oak (1 mile west), Holt (1 mile north-west) and Grange (1 mile west). Further out, we also cover Christchurch (10 miles south-east), Blandford Forum (9 miles west), Verwood (5 miles north-east), Ferndown (3 miles south-east), Broadstone (5 miles south-west) and Corfe Mullen (5 miles south-west).
What’s near Broom Hill
We visit homes around Colehill First School, Dumpton School and Church of St James. Nearby you’ll also find St Leonard's Hospital (4.3 miles east) and Stapehill Abbey (1.9 miles south-east).
How to care for the repair
Once the work has cured, treat it gently:
- Store bottles off the bath
- A quick wipe after use keeps limescale away
- Use washing-up liquid and a soft cloth
- Have chips seen to early
A quick rinse and wipe after use helps, especially in hard water areas, to stop limescale building up.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
Landlord and trade work in Broom Hill
For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
What a repair can’t fix
We would rather lose a job than do one that will not last, so these are the limits:
- Holes rusted through the metal
- A metal bath with a through crack
- Leaking taps or wastes (a plumber’s job)
Not sure? Send photos and we will give you a straight answer before booking.
Materials we repair
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
Should you replace it?
If you like your bathroom but not your bath’s surface, resurfacing is the simplest answer. Tiles, panels and taps stay put. Our bath re-enamelling starts from £350. A repair is priced on what needs doing, not where you live. You will see the full price before booking.
Why book with us
- We leave the room as we found it
- One-year guarantee on every repair
- Free fixed quotes from pictures
- Most jobs done in one visit
Take a look at our pricing or resurfacing vs replacement cost guide.
How the visit works
We agree an arrival time beforehand, so you’re not left guessing. Once we’re there, the work takes a full day for most jobs. We leave the room clean and ready to use once it has cured.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
Before we arrive
- Tell us about any previous repairs or coatings
- Keep children and pets away from the room on the day
- Tell us about parking, stairs or access
How to get a price
For a price in Broom Hill, the easiest route is photos: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
Read more
Questions from Broom Hill
How do I book?
Photos of the damage, a picture of the whole bath and your postcode. Then we will agree a date.
Is there a call-out fee?
Travel is included in the price, with the same prices everywhere we work.
How long will the bath be out of use?
Most baths are done in a day, ready the following day. We give you timings with the quote.
How soon can you come?
It depends on the time of year and where you are. Send pictures with your postcode and we’ll reply with the earliest dates.
How durable is a resurfaced bath?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Will there be fumes?
Yes, while we’re applying the finish. We set up ventilation and the smell fades as it cures.
Is it worth repairing rather than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we’ll tell you.
Common problems we fix in Broom Hill
Once enamel loses its gloss, it stains more easily, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.
Typical reasons for a call-out include:
- Lots of chips and rust spots
- A dull, rough surface that will not come clean
- A roll-top that is seen better days
- Wear marks under the taps
Before booking anyone
- What happens if they find more damage
- How to care for the finish
- Who turns up on the day
- How the room is protected while they work
What bath re-enamelling costs
Prices start from £350. We give every job a fixed quote from pictures. These are the things that affect it:
- Any earlier repairs that need removing first
- Unusual colours or finishes
- What the surface is made of
- How easy the damage is to reach
Instead of hourly rates, we price the whole job up front. Damage, material and access decide it, and combining items on one visit brings it down.
Quotes from your photos
You can typically get a fixed quote without us visiting. To help us price it:
- Whether it’s been repaired or coated before
- Good light, ideally daylight, without flash glare
- A coin or ruler next to the damage for scale
- Any details about the material
A quote takes minutes to ask for: photograph the damage, then the whole bath, add your postcode and send them to us. You’ll get a fixed price, not an estimate.
About our accreditations · Every repair comes with a one-year guarantee.
