Dorset · England
Bath Re-enamelling for Pig Oak homes
Bath re-enamelling for Pig Oak, without a refit. Get a fixed quote from your pictures, then book a visit.
- Resurfacing from £350
- A coloured bath you want in white
- Staining under the taps and around the waste
About our bath re-enamelling in Pig Oak
We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, and we take our time over it. Common call-outs are for staining under the taps and around the waste and a period or roll-top bath worth keeping, in acrylic baths, Victorian roll-tops and basins & shower trays.
You are covered for a year from the day of the repair. Just call us if there is a problem and we’ll sort it.
- Where
- Pig Oak (BH21)
- Region
- Dorset
- Cover
- One year on every repair
- Price
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
How to look after the repair
Nothing complicated is needed, just a few sensible habits:
- Avoid suction-cup mats
- Fix dripping taps quickly
- Stick to gentle, non-abrasive cleaners
- Keep toiletries on a shelf rather than in the bath
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and don’t leave bottles or razors standing on the surface.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
The process
Nothing needs to be moved out of the room. Everything we use comes in the van with us, lay protective sheets and get going once we have agreed what we’re doing. It normally takes most of the day, and you’re welcome to carry on with your day while we work.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the following day.
How to prepare
- Have a window or extractor fan available
- Let us know which floor the room is on
- Keep children and pets away from the room on the day
How to get a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed quote the same day in most cases.
Related advice
Should you replace it?
Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Prices start from £350. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send photos and you’ll get a fixed figure.
Why book with us
- We leave the room as we found it
- Colour mixed on the day to match
- Free fixed quotes from pictures
- CHAS and Constructionline accredited
See our prices page or guide to resurfacing and replacement costs.
Materials and what they mean for the repair
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
About Pig Oak
Pig Oak is about 2 miles north of Wimborne Minster, in Dorset. From the centre of Pig Oak to the outlying streets, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. We work in all 462 towns and villages in Dorset.
Postcode districts we cover here: BH21. If you’re just outside Pig Oak, we cover Grange (1 mile south-west), Holt (1 mile north-east), God's Blessing Green (1 mile east), Clapgate (1 mile south-west) and Broom Hill (1 mile east). We also work in nearby towns such as Christchurch (11 miles south-east), Blandford Forum (9 miles west), Verwood (5 miles north-east), Ferndown (4 miles south-east), Broadstone (5 miles south) and Corfe Mullen (4 miles south-west).
Near you in Pig Oak
Around Pig Oak, we work in homes near Dumpton School, Queen Elizabeth's School and Church of St James, among other places. Further afield, we also cover the area around Stapehill Abbey (2.5 miles south-east) and St Leonard's Hospital (5 miles east).
What a repair can’t fix
Not everything can be repaired, and we will tell you before we start. We can’t fix:
- A metal bath with a through crack
- Steel that has corroded right through
- Acrylic that moves when you stand in it
Not sure? Send photos and we will give you a straight answer before booking.
Materials we work on in Pig Oak
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
Pig Oak questions
What happens next?
We come back with a fixed price, usually with dates to choose from. You are under no obligation.
Can I get a quote without a visit?
Nearly always. If pictures don’t show enough, we’ll ask for another angle.
Do you work for landlords and businesses?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
I rent my home. Can I book you?
We’re happy to deal with the tenant, landlord or agent. Just make sure the landlord agrees.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Is it safe with children and pets around?
On the day, the room should be kept clear of pets and children, so the repair is not disturbed while it cures.
Someone resurfaced my bath and it’s peeling. Can you help?
Typically, yes. We strip the failing coating and resurface it properly. Mention it when you send photos.
Does the bath have to be removed?
No, it stays where it is. We work on the bath in place, with the room protected and ventilated.
Landlord and trade work in Pig Oak
We work for landlords, letting agents and housing providers in Pig Oak as well as householders. Repairing between tenancies keeps void periods short, and it typically costs far less than a refit.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
When to call us in Pig Oak
Many baths we resurface have simply been well used, with nothing wrong except the surface. The body of the bath is generally perfectly sound.
Send us a picture if you notice any of these:
- Lots of chips and rust spots
- A bath in a colour that no longer suits
- An original cast iron bath that needs restoring
- Stains that will not shift
Questions to ask before you book
- A fixed quote, and whether VAT is included
- How your room will be protected
- How to look after the finish
- What happens if the damage is worse than the photos show
How we price bath re-enamelling
Resurfacing from £350. We charge the same across the UK, including Pig Oak. What changes the price is:
- Whether old repairs or coatings need taking off
- What the surface is made of
- Whether it’s a chip, crack, burn or wear
- The colour and finish to match
Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Quotes from your pictures
Most quotes are done from pictures alone. To help us price it:
- Natural light rather than flash
- One sharp close-up of the damage
- Something in shot to show the size
- Whether it’s been repaired or coated before
If you are in Pig Oak and want a price, photos are the quickest way: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.
Also in Pig Oak
About our accreditations · Every repair comes with a one-year guarantee.
