Kent · England
Bath re-enamelling & resurfacing in Broomfield, Kent
Full bath re-enamelling and resurfacing for homes and businesses in Broomfield and across Kent. Send pictures for a free, fixed quote.
- Resurfacing from £350
- Lots of chips and rust spots
- Worn patches where water runs and sits
Do you need bath re-enamelling in Broomfield?
The gloss on enamel is thin, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.
These are the problems we are asked about most:
- Lots of chips and rust spots
- A roll-top that is seen better days
- A bath in a colour that no longer suits
- A coating lifting around the plughole
What to look for in a quote
- Is the price fixed, and does it include VAT?
- Whether the price covers travel
- The length of the guarantee and what it covers
- How changes to the job are handled
Bath re-enamelling in Broomfield, done in place
If your bath is sound but looks tired, re-enamelling is generally the most cost-effective option. It avoids removal, plumbing and re-tiling. Whether it’s a bath that stays dull however much you clean it and lots of chips and rust spots, we can help, whatever the material.
You are covered for a year from the day of the repair. Just call us if there is a problem and we’ll come back.
- Where
- Broomfield (ME17)
- Region
- Kent
- Warranty
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Landlords, agents and businesses in Broomfield
We regularly work with letting and managing agents. Just send pictures, the address and how to get access and we will handle the rest.
For anyone letting property in or around Broomfield, we can repair and quote for several addresses together. Just send pictures for each address and we will come back with a combined price.
What bath re-enamelling costs
Prices start from £350. Prices are worked out job by job. What matters most is:
- Unusual colours or finishes
- Access to the area
- The size and number of damaged areas
- What the surface is made of
We do not add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Getting a price from pictures
A couple of clear pictures is all it takes. Try to include:
- Any details about the material
- Where you are, by postcode
- A close-up of the damage, in focus
- Details of any past repairs
Pricing is simple: snap the damage close up and then the entire item, send them over with your postcode, and we’ll reply with a fixed quote. There is no charge for the quote and no obligation.
Materials and what they mean for the repair
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Covering Broomfield
Broomfield is about 5 miles east of Maidstone, in Kent. Anywhere in ME17, we come to you. Broomfield is one of 922 places in Kent we cover. Our jobs stretch from Broomfield to London (about 36 miles away).
Here we cover the ME17 postcode area. Neighbouring places we cover include Chegworth (1 mile east), Ashbank (1 mile north-west), Kingswood (1 mile south), Eyhorne Street (1 mile north) and Leeds (1 mile west). Further out, we also cover Maidstone (5 miles west), Ashford (12 miles south-east), Sittingbourne (8 miles north-east), Faversham (12 miles north-east), Minster (14 miles north-east) and Kings Hill (10 miles west).
Local landmarks in Broomfield
Around Broomfield, we work in homes near Leeds and Broomfield Church of England Primary School, Church of St Margaret and The Park Gate Inn. For rail, the closest station is Hollingbourne station, about 1.6 miles north. Well-known places in the area include Leeds Castle (under half a mile north-west) and KIMS hospital (4.5 miles north-west). Open spaces near Broomfield include Detling Hill.
What else we do in Broomfield
Honest limits
Some jobs are not right for a repair, including:
- Leaks from fittings rather than the bath
- A bath that is rusted through
- A poorly supported acrylic bath, until it’s firmed up
If in doubt, send pictures and we will say what we think before booking.
Surfaces we repair
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
Keeping it looking good
Looking after the surface is easy, and it makes a real difference:
- Stick to gentle, non-abrasive cleaners
- Store bottles off the bath
- Avoid suction-cup mats
- Do not let dyes or oils sit on the finish
Use mild, non-abrasive cleaners, don’t use suction bath mats, and don’t leave bottles or razors standing on the surface.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Common questions in Broomfield
Do you work in Broomfield?
Yes. We work across the UK and travel to Broomfield and the rest of Kent. Send photos and we will quote, or call 0345 017 0787.
How long does re-enamelling take?
Normally a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
Is my repair covered?
All our work carries our one-year guarantee. We will explain what it covers when we quote.
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
How durable is a resurfaced bath?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.
What do you need from me?
Some pictures, your postcode and how to reach you. On the day, access to the room.
Do you work for landlords and businesses?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses across Kent.
Is it messy?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
Can I fix it myself?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
How the visit works
We agree an arrival time beforehand, so you’re not left guessing. Once we’re there, the work takes a full day for most jobs. The room is left tidy and ready to use once it has cured.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure.
Preparing for the visit
- Have a window or extractor fan available
- Tell us about any previous repairs or coatings
- Point us to the nearest place to park
Getting a price
Email us a photo of the damage and a wider shot of the whole item, with your ME17 postcode, and we’ll reply with a fixed quote.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
