Cumbria · England
Bath re-enamelling & resurfacing in Brough, Cumbria
Full bath re-enamelling and resurfacing at your home in Brough, with a one-year guarantee on every repair.
- Resurfacing from £350
- An outdated colour you’d like to change
- Wear marks under the taps
Bath re-enamelling at your home in Brough
Resurfacing renews the whole surface of the bath without a refit. It’s the answer when the whole bath is tired rather than one spot. Whether it’s a roll-top that’s seen better days and a dull, rough surface that won’t come clean, we can help.
A one-year guarantee comes as standard.
- Area
- Brough (CA17)
- Area hub
- Cumbria
- Warranty
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What happens on the day
There is not much you need to do on the day. Show us the job, point us to the room, and we’ll take it from there. The job generally runs to most of the day, including clearing up.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- Once cured, normally by the day after, the bath is ready.
Getting ready for the visit
- Point us to the nearest place to park
- Make sure the area is dry
- Mention if the room is upstairs or in a flat
How to get a price
Pricing is simple: snap the damage close up and then the entire item, send them to us with your postcode, and we’ll reply with a fixed quote. Quotes are free and you are under no obligation.
Read more
Nearby places to Brough
More services for Brough
How to care for the repair
After the repair has cured, a few habits help it last:
- Rinse off hair dye, oils and bath bombs straight away
- Get any chip repaired quickly
- Wipe the bath dry after use in hard water areas
- Leave the bath for the full curing time before using it
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
Do not try to scrub a worn bath back to shine. It removes more of the surface and makes resurfacing more work.
Common problems we fix in Brough
Hard water speeds up the wear, and abrasive cleaners do the most damage.
It’s worth getting a quote if you see:
- A bath that stays dull however much you clean it
- A coloured bath you want in white
- Thin, worn enamel in places
- Lots of chips and rust spots
Questions to ask before you book
- What aftercare is recommended
- How long it needs to cure
- How long the guarantee is and what it covers
- What protection goes down before work starts
For landlords and businesses
We are used to working with agents and managing companies. Just send photos, the address and how to get access and we will handle the rest.
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Materials and what they mean for the repair
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
What bath re-enamelling costs
Resurfacing from £350. We give every job a fixed quote from photos. These are the things that affect it:
- The material
- Access to the area
- Whether we combine several jobs
- How hard the colour is to match
Instead of hourly rates, we price the entire job up front. Damage, material and access decide it, and doing several items at once reduces it.
Getting a price from photos
Almost every job we do is priced from pictures. This is what to send:
- A photo taken from further back
- A coin or ruler next to the damage for scale
- Daylight if possible, and no flash reflection
- Your postcode, so we can check dates
The quickest way to a price is to send a couple of photos using our quote form or ring us. We will tell you honestly if a repair is the right fix.
Why repair rather than replace?
When the bathroom is fine apart from the bath’s finish, re-enamelling is the least disruptive fix. Nothing else is disturbed. Our bath re-enamelling starts from £350. The price reflects the work involved, not your postcode. You will see the full price before you book.
Why Brough customers choose us
- One visit for most repairs
- Rooms protected and left tidy
- Every repair guaranteed for a year
- Everything repaired in place
Take a look at our full price list and bath cost comparison.
When a repair isn’t the answer
We’ll always be straight with you, so here’s what a repair can’t fix:
- Leaks from fittings rather than the bath
- An acrylic bath that flexes badly underfoot
- A metal bath with a through crack
If in doubt, send photos and we will say what we think.
What we work on
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
Brough questions
Will the new finish last?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Is there a call-out fee?
Travel is included in the price, with the same prices everywhere we work.
Someone resurfaced my bath and it’s peeling. Can you help?
Usually, yes. We strip the failing coating and resurface it properly. Mention it when you send photos.
Will it make a mess?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
Do you need to take the bath out?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
Do I have to be there?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
What if the damage is worse than the photos show?
The price is fixed for what the photos show. Anything extra is discussed before we begin.
Can you change the colour of my bath?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
Our work in Brough
Brough is about 20 miles south-east of Penrith, in Cumbria. We travel to homes and businesses in Brough, so there is no workshop to go to. Brough is one of 438 towns and villages in Cumbria where we work. You can also see our page for Newcastle upon Tyne, about 42 miles away.
Our repair technicians cover all of CA17 and the streets around it. From Main Street, High Street and Swan Avenue or a nearby road, a technician can come to you. If you’re just outside Brough, we cover Church Brough (1 mile south), Helbeck (1 mile north), Great Musgrave (2 miles south-west), Little Musgrave (2 miles west) and Rookby (2 miles south). Further out, we also cover Appleby-in-Westmorland (8 miles north-west), Kirkby Stephen (4 miles south), Bongate (7 miles north-west) and Shap (14 miles west).
Landmarks near Brough
Our customers here include homes close to Church of St Michael and Brough Primary School. Other landmarks nearby include Brough Castle (less than half a mile south-west) and Dyke Nook Farm Museum (3.8 miles west). Green spaces nearby include Augill Pasture.
About our accreditations · Every repair comes with a one-year guarantee.
