Cumbria · England
Bath Re-enamelling in Warcop
Fixed-price bath re-enamelling in Warcop and the surrounding area, done in a single visit in most cases and guaranteed for a year.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- An old resurfacing that’s failing
Bath re-enamelling at your home in Warcop
Most baths are re-enamelled in a day, with the bath ready to use the following day. Taps, tiles, panels and plumbing all stay in place. We regularly repair Victorian roll-tops, cast iron baths and acrylic baths, and common reasons people get in touch are a period or roll-top bath worth keeping and an outdated colour you’d like to change.
The work is guaranteed for twelve months. If something is not right in that time, we come back and put it right.
- Where
- Warcop (CA16)
- Area hub
- Cumbria
- Warranty
- A year, on every repair
- Price
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Why repair rather than replace?
For a sound bath, resurfacing costs far less than replacement, when you count removal, plumbing, tiling and decorating. It’s much quicker too. Prices start from £350. Instead of hourly rates, we price the entire job up front. Damage, material and access decide it, and doing several items at once reduces it.
Why Warcop clients choose us
- Same prices wherever you are
- A fixed quote before you book
- Rooms protected and left tidy
- Every repair guaranteed for a year
Read our full price list or guide to resurfacing and replacement costs.
When to call us in Warcop
Hard water speeds up the wear, and gritty cleaners are the worst culprits.
Send us a photo if you notice any of these:
- An original cast iron bath that needs restoring
- A coating lifting around the plughole
- Lots of chips and rust spots
- Wear marks under the taps
Before booking anyone
- What protection goes down before work starts
- What happens if they find more damage
- The length of the guarantee and what it covers
- How the colour is matched
What bath re-enamelling costs
Resurfacing from £350. Prices are worked out job by job. What matters most is:
- How many items we do on one visit
- How many areas need work
- How hard the colour is to match
- Previous DIY repairs that have to come out
There are no surprise extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
Getting a price from photos
Phone photos are fine, there is no need for anything special. Just ensure we can see:
- Any details about the material
- The postcode, so we can plan the visit
- Daylight if possible, and no flash reflection
- Whether it’s been repaired or coated before
For a price in Warcop, the easiest route is pictures: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Aftercare tips
Once the work has cured, treat it gently:
- Stick to gentle, non-abrasive cleaners
- Keep suction mats out of the bath
- Get any chip repaired quickly
- A dripping tap should be fixed promptly
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
Worn enamel only gets rougher with time, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
Questions from Warcop
What happens next?
We look at the pictures and reply with a fixed price and some dates. If we need another angle, we will ask.
Do you cover Warcop?
Yes. We cover the entire UK and come to Warcop and the rest of Cumbria. Send us pictures for a fixed quote, or call 0345 017 0787.
Do you resurface freestanding baths?
Yes. Inside and out if you’d like.
Do you charge for travel?
We don’t add a call-out fee. Your fixed quote includes everything.
How long will the bath be out of use?
Typically a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
Can you quote from photos?
In nearly every case. If pictures don’t show enough, we will ask for another angle.
What happens if you find more damage?
If we find something the pictures didn’t show, we explain it first. The price only changes if you agree.
I’m a tenant. Can you help?
We are happy to deal with the tenant, landlord or agent. Just make sure the landlord agrees.
Places near Warcop
What else we do in Warcop
What your bath is made of matters
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Steel frequently rusts by the plughole, so we pay close attention there.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Covering Warcop
Warcop is about 17 miles south-east of Penrith, in Cumbria. We travel to clients in Warcop and nearby villages, so you do not need to take anything anywhere. Warcop is one of 438 towns and villages in Cumbria where we work. You can also see our page for Newcastle upon Tyne, about 44 miles away.
We work across CA16 and the streets around it. Whether you live on Brookside and Chapel Garth or a nearby road, we can come to you. Other places close to Warcop include Bleatarn (1 mile south-west), Little Musgrave (2 miles south-east), Great Musgrave (2 miles south-east), Soulby (3 miles south) and Brough (3 miles east). Larger places within reach include Appleby-in-Westmorland (5 miles north-west), Kirkby Stephen (5 miles south), Bongate (5 miles north-west) and Shap (11 miles west).
Landmarks near Warcop
Locally, our jobs take us to homes close to Warcop CofE Primary School, St Columba's Church and The Fox pub, among other places. For rail, the closest station is Appleby station, about 5 miles north-west of the centre. Other landmarks nearby include Dyke Nook Farm Museum (1.1 miles north-west) and Brough Castle (2.9 miles east). The countryside around Warcop includes Murton Pike and Augill Pasture.
When a repair is not the answer
A repair is not always the answer, and we will tell you before we start. We cannot fix:
- An acrylic bath that flexes badly underfoot
- Damage hidden under a previous coating, until it’s stripped back
- A metal bath with a through crack
Not sure? Send pictures and we’ll give you a straight answer before you book.
Materials we repair
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
What we do, step by step
When we visit, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take a full day. We tidy up before we leave and let you know when you can use it again.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the following day.
Before we arrive
- Move bottles, mats and clutter away from the area
- Tell us about parking, stairs or access
- Let us know if it has been repaired before
How to get a price
We price from pictures so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
Advice
Should I try a DIY kit first?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
About our accreditations · Every repair comes with a one-year guarantee.
