Bridgend · Wales

Bath Re-enamelling in Brynheulog

We travel to Brynheulog for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.

  • Resurfacing from £350
  • A bath in a colour that no longer suits
  • A period or roll-top bath worth keeping
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling in Brynheulog

Prices and what affects them

Resurfacing from £350. We give every job a fixed quote from photos. This is what makes a difference:

  • The material and finish
  • Previous DIY repairs that have to come out
  • The colour and finish to match
  • How easy the damage is to reach

The price reflects the work involved, not where you live. The full price is agreed before you book.

Getting a price from photos

Good photos mean an accurate price. Here’s what helps:

  • What it’s made of, if you know
  • Something in shot to show the size
  • Daylight if possible, and no flash reflection
  • Your postcode, so we can check dates

Upload a photo of the damage and a wider shot of the whole item, and tell us you’re in Brynheulog, and we’ll reply with a fixed quote.

Bath re-enamelling in Brynheulog without replacing anything

We do not move the bath, so the taps, tiles and plumbing are not touched. It normally takes one visit, with the bath ready to use the following day. Whether it’s brown or grey marks that don’t clean off and a bath that stays dull however much you clean it, we can help, whatever the material.

You’re covered for a year from the day of the repair. If anything is not right, ring us and we will come back.

Roll-top bath being refinished by a Surface Doctor technician
Where
Brynheulog (CF34, SA13)
Area hub
Bridgend
Warranty
12 months on all our work
Price
From £350. Free and fixed, from your photos
Telephone
0345 017 0787
Updated
23 October 2026

Aftercare tips

A little care keeps the finish looking good. We recommend:

  • Rinse off hair dye, oils and bath bombs immediately
  • Stick to gentle, non-abrasive cleaners
  • Do not leave bottles, razors or sponges standing on the surface
  • Wipe the bath dry after use in hard water areas

Wipe the bath dry after use where you can, particularly with hard water, and rinse away any product left on the surface.

The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.

What we can’t put right

To be straight with you, there are a few things a repair will not fix:

  • A cast iron or steel bath that’s cracked right through
  • Acrylic that moves when you stand in it
  • Problems we cannot see until an old finish comes off

If in doubt, send photos and we’ll say what we think before booking.

Materials we repair

  • Basins & shower trays
  • Cast iron baths
  • Victorian roll-tops
  • Pressed steel baths
  • Acrylic baths

Repair or replace in Brynheulog?

A replacement frequently means several trades over several days. Re-enamelling is one technician, normally one day. Our bath re-enamelling starts from £350. We don’t add extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.

Why us?

  • One-year guarantee on every repair
  • Technicians who travel to you, UK-wide
  • Accredited with CHAS, Constructionline and SafeContractor
  • No extra charge for your area

Take a look at our prices page and bath cost comparison.

DIY repairs versus a professional job

For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.

Different materials, different repairs

Roll-top and period baths

Freestanding roll-tops can be done inside and out, and the outside can be refinished too.

Pressed steel

Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.

Where we work around Brynheulog

Brynheulog is about 2 miles north of Maesteg, in Bridgend. Across the CF34 area, we come to you. We work in 91 places in Bridgend.

Postcode districts we cover here: CF34 and SA13. Jobs here include addresses on Cymer Road, Hermon Road and Caerau Road and the roads around them. We also travel to Caerau (1 mile south), Dyffryn (1 mile south), Blaencaerau (1 mile east), Spelter (1 mile south) and Croeserw (1 mile north-east). Larger places within reach include Bridgend (10 miles south), Porthcawl (11 miles south), Newcastle Higher (10 miles south), Ynysawdre (7 miles south-east), Pencoed (10 miles south-east) and Cefn Glas (9 miles south).

What’s near Brynheulog

Locally, our jobs take us to homes close to Maesteg School, Station Hotel and St Cynfelyn's Church. For rail, the closest station is Maesteg station, about 2.1 miles south. A little further out are Llwdarth (2.9 miles south) and Maesteg Community Hospital (2.1 miles south). Not far away are Foel Fawr.

Map of Brynheulog © OpenStreetMap contributors

What happens on the day

We begin by going over the job with you, so there are no surprises. Then the area is sheeted and masked and the work begins. It normally takes most of the day, and we’ll tell you if anything changes.

  1. The bathroom is protected and ventilation set up.
  2. We remove the old silicone and deep clean the bath.
  3. Chips, rust and pitting are repaired.
  4. The surface is keyed and primed for the new finish.
  5. Several coats of finish are sprayed on, then it cures.

Getting ready for the visit

  • Have somewhere for us to park nearby if possible
  • Tell us if there are stairs or a lift
  • Ensure the room can be ventilated

Ask for a price

Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.

Get a fixed price

Advice

Do you need bath re-enamelling in Brynheulog?

Previous coatings can fail too, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.

Look out for any of the following:

  • A bath in a colour that no longer suits
  • Wear marks under the taps
  • Brown or grey marks that don’t clean off
  • A roll-top that is seen better days

Before you book anyone

  • Whether there are any call-out or travel charges
  • What prep work is covered
  • Who turns up on the day
  • How changes to the job are handled

How to compare quotes

Brynheulog questions

Will the new finish last?

A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.

Will there be a smell?

There may be a mild smell during the work that clears as it cures.

Can pets and children be at home?

Just keep them out of the work area. We’ll tell you when the room can be used again.

Is my repair covered?

Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.

Is there a call-out fee?

Travel is included in the price, with the same prices everywhere we work.

Can you price it without visiting?

In nearly every case. If pictures don’t show enough, we’ll ask for another angle.

Will the price change on the day?

If we find something the photos didn’t show, we explain it first. The price only changes if you agree.

Do you do work for letting agents?

Yes. We work for landlords, agents, builders and businesses as well as householders.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.