Wrexham · Wales
Bath re-enamelling & resurfacing in Brynhovah, Wrexham
Bath re-enamelling in and around Brynhovah: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- Lots of chips and rust spots
- A coating lifting around the plughole
Bath re-enamelling in Brynhovah, done in place
Re-enamelling works especially well on cast iron and steel, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. If you are dealing with a dull, rough surface that won’t come clean and an original cast iron bath that needs restoring, we can normally put it right.
You’re covered for a year from the day of the repair. If anything isn’t right, ring us and we’ll sort it.
- Area
- Brynhovah (LL13)
- Area hub
- Wrexham
- Cover
- One year on every repair
- Price
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Repairing versus replacing in Brynhovah
If you like your bathroom but not your bath’s surface, re-enamelling is the least disruptive fix. Tiles, panels and taps stay put. Resurfacing from £350, with every job priced individually. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.
Why us?
- Typically one visit, start to finish
- Fixed prices from your pictures
- CHAS and Constructionline accredited
- Honest advice, even when it means no job
Read our prices page and bath cost comparison.
Landlords, agents and businesses in Brynhovah
If you manage property in Brynhovah, we will quote for several properties at once. Just send photos for each address and we’ll price them together.
We regularly work with letting and managing agents. Send the address, pictures and access details and we’ll arrange it.
When a repair isn’t the answer
We would rather lose a job than do one that will not last, so these are the limits:
- A bath that is rusted through
- Anything hidden under an old coating, until we remove it
- An acrylic bath that flexes badly underfoot
Not sure? Send photos and we’ll give you a straight answer.
Materials we work on in Brynhovah
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Cast iron baths
Different materials, different repairs
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.
Looking after it afterwards
How the surface is treated afterwards matters:
- A quick wipe after use keeps limescale away
- Use washing-up liquid and a soft cloth
- Keep toiletries on a shelf rather than in the bath
- Fix dripping taps quickly
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Repair dripping taps promptly.
Don’t try to scrub a worn bath back to shine. It removes more of the surface and makes resurfacing more work.
Common problems we fix in Brynhovah
Previous coatings can fail too, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
Send us a photo if you notice any of these:
- A period or roll-top bath worth keeping
- Staining under the taps and around the waste
- A coloured bath you want in white
- An old resurfacing that’s failing
What to look for in a quote
- How your room will be protected
- How soon you can use it again
- What preparation is included
- Who will actually do the work
How the visit works
We agree an arrival time beforehand, so you are not left guessing. On site, it takes most of the day for most jobs. The room is left tidy and ready to use once it has cured.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Avoid using the area for a few hours before we arrive
- Let us know if it has been repaired before
- Make sure the room can be ventilated
Get a quote
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Read more
Brynhovah: your questions answered
Can you redo someone else’s repair?
Most of the time. Let us know what was used before and we’ll plan for it.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
How much does bath re-enamelling cost in Brynhovah?
Resurfacing from £350. Every job gets a fixed price from your pictures. Send a close-up of the damage and a wider photo and your postcode.
Can you resurface a pink bath in white?
Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.
Can you fix a peeling bath coating?
Yes. Removing the old finish takes extra time, which we include in the price.
Can pets and children be at home?
Yes, as long as they stay out of the room we are working in. We will tell you when the room can be used again.
What happens if you find more damage?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
Is a repair better than a new one?
Generally, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.
Nearby places to Brynhovah
Also in Brynhovah
Should I try a DIY kit first?
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and don’t use it until it has fully cured. If it fails, we can still put it right.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
Brynhovah and nearby
Brynhovah is about 5 miles south-east of Wrexham, in Wrexham. Book a date that suits you, and you will know when to expect us, so there is no waiting around. We work in 115 places in Wrexham. We work right across the region, from Brynhovah to Liverpool (29 miles away).
Our repair technicians cover all of the LL13 postcode area and the streets around it. Neighbouring places we cover include Owrtyn (1 mile south-west), Little Overton (1 mile south-west), Lightwood Green (2 miles south), Knolton (3 miles south) and Dudleston Heath (4 miles south). Further out, we also cover Wrexham (5 miles north-west), Caia Park (5 miles north-west), Offa (5 miles north-west), Rhosllannerchrugog (6 miles west), Rhosddu (6 miles north-west) and Acton (6 miles north-west).
Landmarks near Brynhovah
We visit homes around St Mary's C.I.W. Aided School and the streets around them. Further afield, we also cover the area around Cae Whisken Fieldname (1.3 miles south-west) and Penley Community Hospital (2.9 miles south-east). Green spaces nearby include Wat's Dyke and The Lake.
About our accreditations · Every repair comes with a one-year guarantee.
