Cheshire West and Chester · England
Bath Re-enamelling for Bulkeley homes
Our repair technicians come to Bulkeley for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- A coloured bath you want in white
- Worn patches where water runs and sits
How we handle bath re-enamelling in Bulkeley
A re-enamelled bath looks and feels like a new one, without any of the disruption of replacing it. It’s ideal if you like your bathroom but not the state of the bath. If you’re dealing with chips and rust in more than one place and a dull, rough surface that won’t come clean, we can normally put it right.
The work is covered for a year after we finish. If anything isn’t right, ring us and we’ll sort it.
- Location
- Bulkeley (SY14)
- Area hub
- Cheshire West and Chester
- Warranty
- A year, on every repair
- Quote
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Common questions in Bulkeley
When can you do it?
Your quote comes with available dates. If it’s urgent, say so and we will do what we can.
Will it make a mess?
No. The work area is masked and covered, and we leave the room clean.
Can you price it without visiting?
Usually, yes. Clear pictures let us give you a fixed price without visiting.
Can you do the outside of a roll-top?
Yes. We can do the inside and outside.
Can you fix a peeling bath coating?
Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.
How long is the bath unusable?
Normally one day, with the bath ready the day after. A badly pitted bath can need a second day.
Are you a vetted contractor?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can you make a coloured bath white?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
When to call us in Bulkeley
Many baths we resurface have simply been well used. Underneath, a cast iron or steel bath is normally as strong as ever.
The things customers usually mention when they call include:
- Stains that will not shift
- A coating lifting around the plughole
- A coloured bath you want in white
- Enamel that’s lost its shine and feels rough
Comparing quotes
- Who will actually do the work
- Whether there are any call-out or travel charges
- How soon you can use it again
- Whether the colour is mixed to match
Covering Bulkeley
Bulkeley is about 8 miles west of Nantwich, in Cheshire West and Chester. Customers in Bulkeley get the same service as everywhere else we cover: a fixed quote from your pictures, and a technician at your door on the day. Our repair technicians cover all 224 towns and villages in Cheshire West and Chester. Our jobs stretch from Bulkeley to Liverpool (24 miles away).
Every address in SY14 is within our area, from the main roads to the quietest streets. Local streets include Mill Lane, Brassey Drive and Mill Grove. If you are just outside Bulkeley, we cover Gallantry Bank (1 mile south-west), Bickerton (2 miles south-west), Fuller's Moor (2 miles west), Brown Knowl (2 miles west) and Barnhill (2 miles west). Further out, we also cover Chester (11 miles north-west), Winsford (10 miles north-east), Northwich (14 miles north-east), Boughton (10 miles north-west), Frodsham (14 miles north) and Hoole (10 miles north-west).
Near you in Bulkeley
We visit homes around Bickerton Poacher pub, among other places. A little further out are Museum of Amusements (3.5 miles north-west) and Tarporley War Memorial Hospital (5.2 miles north). For a walk, there’s Bickerton Hill.
Should I try a DIY kit first?
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
If you’re set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and don’t use it until it has fully cured. If it fails, we can still put it right.
How the visit works
Arrival times are agreed in advance, so you know when to expect us. Once we are there, the work takes most of the day. The room is left tidy.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the following day.
Getting ready for the visit
- Move bottles, mats and clutter away from the area
- Plan for the room to be out of bounds to pets and children
- Mention any earlier repairs or resurfacing
Get a quote
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, add your postcode and send them over. You’ll get a fixed quote, not an estimate.
Related advice
What we cannot put right
Before booking, it’s worth knowing the limits too:
- A poorly supported acrylic bath, until it’s firmed up
- Problems we can’t see until an old finish comes off
- A cast iron or steel bath that’s cracked right through
If in doubt, send pictures and we will say what we think before booking.
Surfaces we repair
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
- Cast iron baths
Different materials, different repairs
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Steel often rusts by the plughole, so we pay close attention there.
Aftercare tips
Aftercare is simple, and it makes a real difference:
- Avoid suction-cup mats
- Clean with a soft cloth and mild detergent
- Wipe the bath dry after use in hard water areas
- Get any chip repaired quickly
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and do not leave bottles or razors standing on the surface.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface and makes resurfacing more work.
For landlords and businesses
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
What affects the price in Bulkeley
Prices start from £350. You will know the full cost before booking. We look at:
- How hard the colour is to match
- Access to the area
- Doing more than one item at once
- The type of damage
Our prices are the same across the UK, so there’s no premium for Bulkeley. The job itself decides the price: the material, the amount of damage and how many items.
How to get a fixed price
We price nearly every job from photos. This is what we need:
- Something in shot to show the size
- Details of any past repairs
- A picture taken from further back
- Good light, ideally daylight, without flash glare
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed price.
Places near Bulkeley
More services for Bulkeley
About our accreditations · Every repair comes with a one-year guarantee.
