Cheshire West and Chester · England
Bath re-enamelling & resurfacing in Barnhill, Cheshire West and Chester
Problem with your bath in Barnhill? We put it right where it is, match it on site and guarantee the work for a year.
- Resurfacing from £350
- Several chips and rust patches
- Staining under the taps and around the waste
Bath re-enamelling in Barnhill without replacing anything
Many of the baths we re-enamel are period roll-tops, which would be difficult and expensive to replace. Resurfacing them in place keeps the original bath. Whether it’s wear marks under the taps and an old resurfacing that’s failing, we can generally put it right.
The work is guaranteed for twelve months. If there is a problem with the repair within the year, we return and sort it.
- Where
- Barnhill (CH3)
- Area hub
- Cheshire West and Chester
- Guarantee
- 12 months on all our work
- Quote
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
What we do, step by step
From the moment we arrive, we keep the work contained to the one room. Surfaces nearby are masked off, the work takes the best part of a day, depending on what we find, and we finish by cleaning up and talking you through the result.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s generally ready the day after.
How to prepare
- Keep pets and children out of the room while we work
- Let us know about parking or access
- Let us know which floor the room is on
Getting a price
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
Advice
Prices and what affects them
Resurfacing from £350. There is no charge for travel to Barnhill. The price comes down to:
- Whether it’s a chip, crack, burn or wear
- Any earlier repairs that need removing first
- Whether we combine several jobs
- How many areas need work
There are no surprise extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Quotes from your photos
You can usually get a fixed price without us visiting. To help us price it:
- Daylight if possible, and no flash reflection
- A coin or ruler next to the damage for scale
- Your postcode, so we can check dates
- One sharp close-up of the damage
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can price the job the same day in most cases.
Also near Barnhill
Also in Barnhill
Keeping it looking good
It’s all simple stuff, just a few sensible habits:
- A quick wipe after use keeps limescale away
- Have chips seen to early
- A dripping tap should be fixed promptly
- Keep toiletries on a shelf rather than in the bath
A quick rinse and wipe after use helps, particularly where water is hard, to stop limescale building up.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
Different materials, different repairs
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
For landlords and businesses
Builders use us to fix snagging damage before handover. Several plots can be done in one visit to keep costs down.
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
DIY repairs versus a professional job
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
Honest limits
In fairness, some problems need a different fix:
- Plumbing leaks, which need a plumber
- Holes rusted through the metal
- A cast iron or steel bath that is cracked right through
Not sure? Send photos and we’ll give you a straight answer before booking.
What we work on
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Cast iron baths
Barnhill and nearby
Barnhill is about 9 miles south-east of Chester, in Cheshire West and Chester. We agree a date that works for you, and we will give you an arrival time in advance, so you’re not left waiting in all day. We cover 224 places in Cheshire West and Chester. We work right across the region, from Barnhill to Liverpool (23 miles away).
Jobs in CH3 are booked in the same way as anywhere else. You’ll find streets such as Nantwich Road and Old Coach Road. We also cover the places around Barnhill: Fuller's Moor (1 mile south-east), Brown Knowl (1 mile south-east), Broxton (1 mile south-west), Larkton (1 mile south) and Bickerton (1 mile south-east). We also work in nearby towns such as Chester (9 miles north-west), Ellesmere Port (15 miles north-west), Winsford (12 miles north-east), Boughton (9 miles north-west), Frodsham (15 miles north) and Hoole (9 miles north-west).
Landmarks near Barnhill
Locally, our jobs take us to homes close to Egerton Arms and All Saints Church. A little further out are Museum of Amusements (2.4 miles north) and Bolesworth Castle (0.9 miles north). Open spaces near Barnhill include Bickerton Hill.
What we are called out for in Barnhill
Enamel wears gradually. Years of cleaning, hard water and hot baths dull the surface, starting where water runs and sits.
Most people contact us when they notice something like this:
- Worn patches where water runs and sits
- An original cast iron bath that needs restoring
- Enamel that is lost its shine and feels rough
- A coloured bath you want in white
What your quote should include
- If travel is included in the price
- Who will actually do the work
- What aftercare is recommended
- A fixed price, and whether VAT is included
Common questions in Barnhill
How much does bath re-enamelling cost in Barnhill?
Prices start from £350. Because every job differs, we price from photos. You know the full cost before anything is booked.
Do I have to be there?
Yes. We need access to the room while we work, at a time we agree with you.
Do you cover Barnhill?
Yes, we do. Technicians travel to Barnhill from across the region, and the price is the same as everywhere else.
Is it worth repairing rather than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we will tell you.
Can you re-enamel a roll-top bath?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
What information do you need?
Some photos, your postcode and how to reach you. On the day, access to the room.
Do you cover the whole of Cheshire West and Chester?
All of Cheshire West and Chester, and the rest of the UK. Travel is included in the price.
Will the price change on the day?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
About our accreditations · Every repair comes with a one-year guarantee.
