Cheshire West and Chester · England
Bath Re-enamelling for Larkton homes
Problem with your bath in Larkton? We repair it in place, mix the colour on the day and back it with a one-year guarantee.
- Resurfacing from £350
- A roll-top that’s seen better days
- Several chips and rust patches
Bath re-enamelling in Larkton without replacing anything
After cleaning, repairing and priming, we spray on the new finish. The preparation is what makes it last, and we take our time over it. We work on pressed steel baths, cast iron baths and basins & shower trays, and the jobs we see most are a roll-top that’s seen better days and worn patches where water runs and sits.
You’re covered for a year from the day of the repair. Just call us if there is a problem and we’ll sort it.
- Where
- Larkton (CH3, SY14)
- Area hub
- Cheshire West and Chester
- Warranty
- One year on every repair
- Quote
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
How to look after the repair
Much of the damage we repair could have been avoided. A few tips:
- Avoid suction-cup mats
- Respect the curing time we give you
- Get any chip repaired quickly
- Don’t leave bottles, razors or sponges standing on the surface
Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Repair dripping taps promptly.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
Can I fix it myself?
If you are set on a kit, follow its instructions closely, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.
What a repair cannot fix
A repair isn’t right for every job, including:
- Plumbing leaks, which need a plumber
- An acrylic bath that flexes badly underfoot
- A cast iron or steel bath that is cracked right through
Not sure? Send photos and we’ll give you a straight answer.
What we work on
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
- Acrylic baths
Our work in Larkton
Larkton is about 8 miles north-west of Whitchurch, in Cheshire West and Chester. From the centre of Larkton to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Larkton is one of 224 towns and villages in Cheshire West and Chester where we work. Our jobs stretch from Larkton to Liverpool (24 miles away).
Jobs in CH3 and SY14 work the same way as everywhere else we cover. Other places close to Larkton include Duckington (1 mile south-west), Brown Knowl (1 mile north), Bickerton (1 mile east), Fuller's Moor (1 mile north) and Barnhill (1 mile north). Larger places within reach include Chester (10 miles north-west), Winsford (12 miles north-east), Boughton (10 miles north-west), Hoole (10 miles north-west), Hartford (15 miles north-east) and Newtown (10 miles north-west).
Around Larkton
We visit homes around Holy Trinity Church and Bickerton Holy Trinity CofE Primary School, among other places. Further afield, we also cover the area around Museum of Amusements (3.6 miles north) and Bolesworth Castle (2 miles north). Not far away are Bickerton Hill.
Nearby places to Larkton
What else we do in Larkton
The process
Expect a friendly, tidy visit. We confirm the time with you beforehand, protect the area, and get on with the job, which normally takes the best part of a day. If we find something your pictures didn’t show, we’ll explain it before carrying on.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- The bath is left to cure and can normally be used the next day.
How to prepare
- Ensure the room can be ventilated
- Avoid using the area for a few hours before we arrive
- Clear the area around the damage
Getting a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them over. You’ll get a fixed price, not an estimate.
Read more
Larkton questions
How soon can you come?
It depends on the time of year and where you are. Send pictures with your postcode and we’ll reply with the earliest dates.
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Will the price change on the day?
The price is fixed for what the photos show. If there’s more, we will tell you before starting.
Will there be fumes?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It clears as the finish cures.
Does someone need to be in?
We need someone to let us in. You don’t need to watch us work.
How do I book?
A close-up, a wider photo and your postcode. Then we will agree a date.
Is my repair covered?
Every repair comes with our one-year guarantee. We will explain what it covers when we quote.
Do you do work for letting agents?
Yes, often. We quote for multiple addresses and fit around tenancy changeovers.
For landlords and businesses
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Builders use us to fix snagging damage before handover. Several plots can be done in one visit to keep costs down.
Materials and what they mean for the repair
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Why repair rather than replace?
A refit takes several trades and several days. Resurfacing is one technician, normally in a day, with the bath ready the following day. Our bath re-enamelling starts from £350. No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Why Larkton customers choose us
- CHAS and Constructionline accredited
- No need to remove anything
- We leave the room as we found it
- Technicians who travel to you, UK-wide
Take a look at our full price list and resurfacing vs replacement cost guide.
Common problems we fix in Larkton
Previous coatings can fail too, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
Most people get in touch when they notice one of these:
- An old resurfacing that’s failing
- Worn patches where water runs and sits
- Lots of chips and rust spots
- An outdated colour you’d like to change
Comparing quotes
- Is the price fixed, and does it include VAT?
- If travel is included in the price
- What happens if they find more damage
- Aftercare advice
About our accreditations · Every repair comes with a one-year guarantee.
