Gloucestershire · England
Bath re-enamelling & resurfacing in Bulley, Gloucestershire
Full bath re-enamelling and resurfacing in Bulley, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Chips and rust in more than one place
- A bath that stays dull however much you clean it
Our work in Bulley
Bulley is about 5 miles north-west of Quedgeley, in Gloucestershire. Customers in Bulley get the same service as everywhere else we cover: a fixed quote from photos, and a technician at your door on the day. Our repair technicians cover 470 places across Gloucestershire, from the larger towns to small villages. Our jobs stretch from Bulley to Birmingham (about 45 miles away).
Postcode districts we cover here: GL2. From Lake Lane and Bulley Lane or a nearby road, a technician can come to you. Neighbouring places we cover include Churcham (1 mile south), Tibberton (1 mile north), Oakle Street (1 mile south), Birdwood (2 miles south-west) and Calcott's Green (2 miles south-east). Larger places within reach include Cheltenham (11 miles east), Gloucester (5 miles east), Stroud (10 miles south-east), Tewkesbury (12 miles north-east), St Paul's (12 miles east) and Lansdown (12 miles east).
Local landmarks in Bulley
Typical jobs here are in homes near The School of the Lion, Church of St Michael and Churcham Primary School. The nearest railway station is Gloucester station, about 4.7 miles east of the centre. A little further out are Gloucestershire Royal Infirmary (4.2 miles east) and Gloucester Castle (4.3 miles east). For a walk, there’s Highnam Woods and May Hill.
Bath re-enamelling in Bulley, done in place
Most baths are re-enamelled in a day, and you can use the bath the next day. Taps, tiles, panels and plumbing all stay in place. If you are dealing with staining under the taps and around the waste and a coating lifting around the plughole, we can help, on acrylic baths, Victorian roll-tops and cast iron baths alike.
Big or small, it’s backed by a one-year guarantee in Bulley and across Gloucestershire.
- Location
- Bulley (GL2)
- County
- Gloucestershire
- Cover
- One year on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Materials and what they mean for the repair
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s the part we put right.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
How the visit works
It’s a tidy, low-fuss visit. We agree the arrival time in advance, protect the area, and get on with the job, which normally takes the best part of a day. If we find something your photos didn’t show, we will explain it before carrying on.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the following day.
Before we arrive
- Move bottles, mats and clutter away from the area
- Have a window or extractor fan available
- Mention any parking restrictions or tricky access
Ask for a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them over. You will get a fixed quote, not an estimate.
Advice
How to look after the repair
Simple care helps the repair last. We recommend:
- Rinse off hair dye, oils and bath bombs right away
- A dripping tap should be fixed promptly
- Get any chip repaired quickly
- Clean with a soft cloth and mild detergent
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Repair dripping taps promptly.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further.
Why repair rather than replace?
For a sound bath, resurfacing costs far less than replacement, when you count removal, plumbing, tiling and decorating. It’s much quicker too. Our bath re-enamelling starts from £350. Rather than charging by the hour, we price the whole job up front. It depends on the damage, the material and access.
What you get with us
- Every repair guaranteed for a year
- We leave the room as we found it
- We come to you, anywhere in the UK
- Same prices wherever you are
Read our pricing or guide to resurfacing and replacement costs.
Prices and what affects them
Resurfacing from £350. We charge the same across the UK, including Bulley. The price reflects:
- Doing more than one item at once
- The material and finish
- The type of damage
- Whether old repairs or coatings need taking off
Set against the cost of replacement, repairing usually costs far less, because there’s no removal, plumbing or making good. The quote lists exactly what you are paying for.
Getting a price from photos
A couple of clear pictures is all it takes. Try to include:
- Your postcode, so we can check dates
- A close-up of the damage, in focus
- One picture of the whole bath
- Any earlier repairs or coatings
Getting a price is easy: take a close-up of the damage and a photo from further back, send them over with your postcode, and you will get a fixed price back. Quotes are free and you’re under no obligation.
What we’re called out for in Bulley
A dull surface stains and holds dirt, and cleaning harder only makes it worse. That is the point where re-enamelling makes sense.
Typical reasons for a call-out include:
- An old resurfacing that is failing
- Chips and rust in more than one place
- Brown or grey marks that do not clean off
- A coloured bath you want in white
Questions to ask before booking
- How to care for the finish
- How your room will be protected
- How long the guarantee is and what it covers
- What happens if they find more damage
Questions from Bulley
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as homeowners in Bulley.
I’m a tenant. Can you help?
Of course. Ask your landlord first, and we can send them the quote if that helps.
How long will the bath be out of use?
Normally a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
What happens next?
We look at the pictures and reply with a fixed quote and some dates. If we need another angle, we’ll ask.
How do I book?
Send photos through the quote form or call 0345 017 0787, and we will take it from there.
Are there extra charges for Bulley?
Travel is included in the price, and we charge the same wherever you are.
What does bath re-enamelling cost?
Prices start from £350. The exact price depends on the damage, so we quote from pictures. You will get a fixed figure before booking.
Someone resurfaced my bath and it’s peeling. Can you help?
In most cases. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
Work for landlords and builders
We work for landlords, letting agents and housing providers in Bulley as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
For anyone letting property in or around Bulley, we can repair and quote for several addresses together. Just send pictures for each address and we’ll price them together.
Nearby places to Bulley
Also in Bulley
What we cannot put right
Some jobs aren’t right for a repair, for example:
- Problems we can’t see until an old finish comes off
- Leaks from fittings rather than the bath
- A bath that is rusted through
Send us photos and we’ll tell you honestly.
What we work on
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
About our accreditations · Every repair comes with a one-year guarantee.
