Gloucestershire · England
Bath re-enamelling & resurfacing in Tibberton, Gloucestershire
Full bath re-enamelling and resurfacing for homes and businesses in Tibberton and across Gloucestershire. Free, fixed quotes from your photos.
- Resurfacing from £350
- A peeling or bubbling previous coating
- Enamel that’s lost its shine and feels rough
How to care for the repair
Much of the damage we repair could have been avoided. A few tips:
- Have chips seen to early
- Keep suction mats out of the bath
- Dry the bath after use to stop limescale
- Respect the curing time we give you
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
Worn enamel only gets rougher with time, and any rust spreads underneath. Resurfacing sooner means less repair work first.
How we handle bath re-enamelling in Tibberton
We re-enamel plenty of period and roll-top baths, which are heavy, hard to move and costly to replace. Doing them in place keeps an original feature. We’re often asked to fix worn patches where water runs and sits and enamel that’s lost its shine and feels rough, across cast iron baths, basins & shower trays and Victorian roll-tops.
Every job is backed for twelve months, and the guarantee is the same wherever you live. We return to put right any problem with the work.
- Where
- Tibberton (GL19, GL2)
- Area hub
- Gloucestershire
- Cover
- A year, on every repair
- Quote
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What your bath is made of matters
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is what we repair.
For landlords and businesses
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
For anyone letting property in or around Tibberton, we’ll quote for several properties at once. Send pictures for each one and we will come back with a combined price.
Our work in Tibberton
Tibberton is about 6 miles north-west of Quedgeley, in Gloucestershire. From the centre of Tibberton to the outlying streets, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. Our technicians cover 470 places across Gloucestershire, from the larger towns to small villages. Our jobs stretch from Tibberton to Birmingham (about 44 miles away).
Jobs in GL19 and GL2 work the same way as everywhere else we cover. We regularly work on streets such as Muzzle Patch, Bovone Lane and Bramble Close and the roads around them. If you’re just outside Tibberton, we cover Bulley (1 mile south), Churcham (2 miles south), Taynton (2 miles west), Birdwood (3 miles south-west) and Oakle Street (3 miles south). Larger places within reach include Cheltenham (11 miles east), Gloucester (6 miles south-east), Stroud (11 miles south-east), Tewkesbury (11 miles north-east), St Paul's (11 miles east) and Lansdown (11 miles east).
Local landmarks in Tibberton
In Tibberton, that means homes near Church of the Holy Trinity and Tibberton Community Primary School, among other places. For rail, the closest station is Gloucester station, about 4.9 miles south-east of the centre. Well-known places in the area include Newent Market House Museum (3.6 miles north-west) and Boulsdon Manor (3.8 miles north-west). Green spaces nearby include May Hill and Highnam Woods.
Honest limits
Honesty matters more than a booking, so here’s what a repair won’t do:
- Holes rusted through the metal
- Problems we can’t see until an old finish comes off
- A cast iron or steel bath that’s cracked right through
If in doubt, send pictures and we will say what we think.
Materials we repair
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
What affects the price in Tibberton
Resurfacing from £350. We charge the same across the UK, including Tibberton. The price reflects:
- How many items we do on one visit
- Where the damage is and how we get to it
- How many areas need work
- Whether old repairs or coatings need taking off
Instead of hourly rates, we price the whole job up front. Damage, material and access decide it.
Send photos for a quote
Before you send pictures, these tips help us give you a firm price:
- Daylight if possible, and no flash reflection
- Any details about the material
- One sharp close-up of the damage
- One picture of the entire bath
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, add your postcode and send them to us. What comes back is a fixed price, not a guess.
Your questions about bath re-enamelling in Tibberton
What happens next?
We review the pictures and send a fixed quote with dates.
Can landlords book you?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses in Tibberton.
What if the damage is worse than the photos show?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
Can you make a coloured bath white?
Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.
Does someone need to be in?
Yes. We need access to the room while we work, at a time we agree with you.
How do I get a price for bath re-enamelling in Tibberton?
Prices start from £350. The exact price depends on the damage, so we quote from pictures. You’ll get a fixed figure before booking.
Which areas do you work in?
We cover the whole UK, including Tibberton and the rest of Gloucestershire. Just include your postcode and we’ll confirm dates.
Can a failed resurfacing be redone?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
Nearby places to Tibberton
Also in Tibberton
Can I fix it myself?
If you do try a kit, read the instructions carefully, and give it the full curing time. If it fails, we can still put it right.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
What we do, step by step
There’s not much you need to do on the day. Show us the job, point us to the room, and we will get on with it. The job generally runs to a full day, tidy-up included.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the next day.
Preparing for the visit
- Make sure the area is dry
- Ensure the room can be ventilated
- Tell us if there are stairs or a lift
Ask for a price
There is no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Read more
Do you need bath re-enamelling in Tibberton?
Hard water speeds up the wear, and abrasive cleaners do the most damage.
Keep an eye out for these signs:
- Thin, worn enamel in places
- A peeling or bubbling previous coating
- A dull, rough surface that won’t come clean
- A bath in a colour that no longer suits
What your quote should include
- How long it needs to cure
- Whether the price is fixed and includes VAT
- How the colour is matched
- What protection goes down before work starts
About our accreditations · Every repair comes with a one-year guarantee.
