Surrey · England
Bath Re-enamelling for Burgh Heath homes
Problem with your bath in Burgh Heath? We put it right where it is, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- Several chips and rust patches
- Staining under the taps and around the waste
How we price bath re-enamelling
Resurfacing from £350. We price every job individually. What matters most is:
- The size and number of damaged areas
- Doing more than one item at once
- Any earlier repairs that need removing first
- The type of damage
Set against the cost of replacement, repairing generally costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Quotes from your pictures
We price nearly every job from pictures. This is what we need:
- The postcode, so we can plan the visit
- What it’s made of, if you know
- A wider photo showing the entire bath
- Something in shot to show the size
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, add your postcode and send them to us. You will get a fixed quote, not an estimate.
Bath re-enamelling in Burgh Heath without replacing anything
Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. Whether it’s brown or grey marks that don’t clean off and an outdated colour you’d like to change, we can help, whatever the material.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Area
- Burgh Heath (KT20)
- County
- Surrey
- Warranty
- 12 months on all our work
- Quotes
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
When to call us in Burgh Heath
Previous coatings can fail too, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
If you can see any of these, send us a photo:
- A peeling or bubbling previous coating
- Lots of chips and rust spots
- Staining under the taps and around the waste
- An outdated colour you’d like to change
Before you book anyone
- What happens if the damage is worse than the photos show
- What protection goes down before work starts
- Whether cleaning and preparation are in the price
- A fixed price, and whether VAT is included
Towns and villages near Burgh Heath
More services for Burgh Heath
Your questions about bath re-enamelling in Burgh Heath
What information do you need?
Some photos, your postcode and how to reach you. On the day, access to the room.
Can you make a coloured bath white?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
How do I get a price for bath re-enamelling in Burgh Heath?
Prices start from £350. Because every job differs, we price from photos. You will get a fixed figure before booking.
Can I get a quote without a visit?
Normally, yes. A close-up and a wider photo are enough to give a fixed price.
Does re-enamelling smell?
Some odour is normal while we spray, which is why we ventilate the bathroom. It fades as the coating cures.
Can you redo someone else’s repair?
Yes, regularly. It can add a little time, which we include in the quote.
Will the bath be moved?
No. We resurface it in place, so nothing else is disturbed.
Do the materials smell?
There may be a mild smell during the work.
Repairs by material
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Repairing versus replacing in Burgh Heath
Replacement only makes sense in a few cases: if the bath is cracked through, if you want a different size or shape, or if you are refitting the entire room anyway. Otherwise, resurfacing usually wins. Prices start from £350. Our prices are the same across the UK, with no extra for Burgh Heath. The job itself decides the price: the material, the amount of damage and how many items.
What you get with us
- Rooms protected and left tidy
- A year’s guarantee on all work
- No extra charge for your area
- One visit for most repairs
Read our prices page and bath cost comparison.
How to look after the repair
Nothing complicated is needed:
- Clean with a soft cloth and mild detergent
- Store bottles off the bath
- Repair dripping taps early
- Rinse off hair dye, oils and bath bombs straight away
Dry the bath after use if possible, and rinse away any product left on the surface.
If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
Burgh Heath and the surrounding area
Burgh Heath is about 3 miles south-east of Epsom, in Surrey. Wherever you are in the KT20 postcode area, we come to you. Burgh Heath is one of 395 towns and villages in Surrey where we work. We work right across the region, from Burgh Heath to London (14 miles away).
Our repair technicians cover all of the KT20 postcode area. Whether you live on Brighton Road, Heathdene and Can Hatch or a nearby road, we can come to you. Nearby, we also work in Great Burgh (1 mile west), Nork (1 mile north), Tattenham Corner (1 mile west), Epsom Downs (2 miles north-west) and Langley Vale (2 miles west). Further out, we also cover Woking (15 miles west), Epsom (3 miles north-west), Horley (9 miles south), Redhill (5 miles south-east), Ewell (4 miles north-west) and Reigate (5 miles south).
Near you in Burgh Heath
Our customers here include homes close to Merland Rise Recreational Ground, St Mary's and The Beacon School, among other places. Also close by are Aberdour School (under half a mile north-east), Shawley Community Primary School (0.7 miles west) and Kingswood Arms (0.9 miles south). For rail, the closest station is Kingswood station, about 1 mile south. Other landmarks nearby include The Ashley Centre (2.8 miles north-west) and Walton on the Hill (2.3 miles south-west). Open spaces near Burgh Heath include Colley Hill and Cuddington Meadows.
Honest limits
We will not take on work that will not last, so these are the limits:
- Leaks from fittings rather than the bath
- A cast iron or steel bath that is cracked right through
- A bath that’s rusted through
Send us pictures and we’ll tell you honestly before booking.
What we work on
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
What we do, step by step
Visits start with a quick look at the job together, so there are no surprises. After that, protection goes down around the work area and we start. Allow a full day.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
Preparing for the visit
- Let us know about parking or access
- Let the surface dry out before the visit
- Tell us if there are stairs or a lift
Ask for a price
If you are in Burgh Heath and want a price, photos are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Read more
Can I fix it myself?
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is generally cheaper.
About our accreditations · Every repair comes with a one-year guarantee.
