East Riding of Yorkshire · England
Bath Re-enamelling for Burton Agnes homes
Fixed-price bath re-enamelling in Burton Agnes and the surrounding area, done in a single visit in most cases and guaranteed for a year.
- Resurfacing from £350
- A bath in a colour that no longer suits
- An original cast iron bath that needs restoring
Materials and what they mean for the repair
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is what we repair.
Bath re-enamelling in Burton Agnes, done in place
Many of the baths we re-enamel are period roll-tops, which would be difficult and expensive to replace. Resurfacing them in place keeps the original bath. We are often asked to fix brown or grey marks that don’t clean off and thin, worn enamel in places, in basins & shower trays, pressed steel baths and cast iron baths.
All our work comes with our one-year guarantee.
- Area
- Burton Agnes (YO25)
- Area hub
- East Riding of Yorkshire
- Guarantee
- A year, on every repair
- Quote
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
What we do, step by step
We begin by going over the job with you, so there are no surprises. After that, protection goes down around the work area and the work begins. Allow a full day.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the following day, the bath is ready.
Getting ready for the visit
- Open a window if you can
- Avoid using the area for a few hours before we arrive
- Point us to the nearest place to park
Get a quote
For a price in Burton Agnes, the easiest route is pictures: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Related advice
FAQs for Burton Agnes
Can a failed resurfacing be redone?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
It’s been repaired before. Can you still fix it?
Yes, regularly. It can add a little time, which we include in the quote.
How long does re-enamelling take?
Typically one day, with the bath ready the day after. Deeply pitted baths may need a second day.
How durable is a resurfaced bath?
Look after it and it lasts. Avoid abrasive cleaners and suction mats.
Do you need to take the bath out?
No, it stays where it is. Everything is done in your bathroom, with the room protected and ventilated.
Can you change the colour of my bath?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
What information do you need?
Some photos, your postcode and how to reach you. On the day, we only need access to the room.
How soon can you come?
Your quote comes with available dates. If it’s urgent, say so and we will do what we can.
Where we work around Burton Agnes
Burton Agnes is about 6 miles south-west of Bridlington, in East Riding of Yorkshire. Anywhere in YO25, we come to you. We work in 299 places across East Riding of Yorkshire, from the larger towns to small villages. We work right across the region, from Burton Agnes to Leeds (53 miles away).
All of YO25 is within our area. You will find streets such as Main Street, Station Road and Shady Lane. Neighbouring places we cover include Harpham (1 mile south-west), Little Kelk (2 miles south), Kilham (3 miles west), Rudston (3 miles north) and Great Kelk (3 miles south). Larger places within reach include Beverley (15 miles south), Bridlington (6 miles north-east), Driffield (6 miles south-west), Hornsea (11 miles south-east), Hilderthorpe (5 miles east) and Flamborough (9 miles north-east).
Near you in Burton Agnes
Our customers here include homes close to Church of St Martin, among other places. Burton Agnes’s nearest station is Nafferton station, roughly 3.9 miles south-west. Well-known places in the area include Bridlington Hospital (4.8 miles north-east).
Repair or replace: which is better?
A refit takes several trades and several days. Re-enamelling takes one technician and generally one day, with the bath ready the following day. Resurfacing from £350, with every job priced individually. The price reflects the work involved, not where you live. The full price is agreed before you book.
Why Burton Agnes customers choose us
- Dust sheets down, tidy finish
- Usually one visit, start to finish
- One price list for the entire UK
- Colour mixed on the day to match
Take a look at our prices page or bath cost comparison.
What bath re-enamelling costs
Resurfacing from £350. There is no area surcharge for Burton Agnes. The price reflects:
- Unusual colours or finishes
- The material
- Whether old repairs or coatings need taking off
- Whether we combine several jobs
We charge the same wherever you are, with no extra for Burton Agnes. The job itself decides the price: how much damage, what it’s made of and how many items.
Quotes from your pictures
The better the pictures, the more accurate the price. Here’s what helps:
- A clear, close picture of the problem area
- What it’s made of, if you know
- The postcode, so we can plan the visit
- A picture taken from further back
There’s no need for us to visit first. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
When a repair is not the answer
We’ll always be straight with you, so here’s what a repair will not do:
- Leaks from fittings rather than the bath
- Acrylic that moves when you stand in it
- A metal bath with a through crack
Send us pictures and we will tell you honestly before booking.
Surfaces we repair
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
Looking after it afterwards
Aftercare is simple, and it makes a real difference:
- Leave the bath for the full curing time before using it
- Wipe the bath dry after use in hard water areas
- Never use suction bath mats
- Get any chip repaired quickly
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
What we are called out for in Burton Agnes
In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.
Look out for any of the following:
- Several chips and rust patches
- Stains that won’t shift
- Worn patches where water runs and sits
- An old resurfacing that is failing
What to look for in a quote
- How long the guarantee is and what it covers
- What happens if they find more damage
- Whether a trained technician does the job
- Whether they match the colour on site
Can I fix it myself?
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
Nearby places to Burton Agnes
Also in Burton Agnes
About our accreditations · Every repair comes with a one-year guarantee.
