Lancashire · England
Bath Re-enamelling for Burton-in-Kendal homes
Bath re-enamelling for Burton-in-Kendal, without a refit. Get a fixed price from your photos, then we come to you.
- Resurfacing from £350
- Thin, worn enamel in places
- Several chips and rust patches
Bath re-enamelling at your home in Burton-in-Kendal
Resurfacing renews the entire surface of the bath without taking anything out. It suits baths that are dull, stained, rough or chipped all over. Typical jobs include enamel that’s lost its shine and feels rough and a peeling or bubbling previous coating, across cast iron baths, acrylic baths and basins & shower trays.
Your repair is guaranteed for a year, as with every job we do.
- Location
- Burton-in-Kendal (LA6)
- Area hub
- Lancashire
- Guarantee
- A year, on every repair
- Quotes
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
What affects the price in Burton-in-Kendal
Resurfacing from £350. There is no area surcharge for Burton-in-Kendal. What changes the price is:
- Access to the area
- The material and finish
- Doing more than one item at once
- What kind of damage it is
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send pictures and you will get a fixed figure.
How to get a fixed price
It only takes a minute to photograph the damage, and it saves a visit. Try to send:
- The postcode, so we can plan the visit
- Something in shot to show the size
- Daylight if possible, and no flash reflection
- The material, if you know it
You do not need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Honest limits
It helps to know what we can’t do too:
- Problems we cannot see until an old finish comes off
- Steel that has corroded right through
- An acrylic bath that flexes badly underfoot
Send us photos and we will tell you honestly.
What we work on
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
- Acrylic baths
- Basins & shower trays
Where we work around Burton-in-Kendal
Burton-in-Kendal is about 10 miles north-east of Morecambe, in Lancashire. Our technicians come to homes and businesses in Burton-in-Kendal and nearby villages, so you don’t need to take anything anywhere. Burton-in-Kendal is one of 482 towns and villages in Lancashire we cover. You can also see our page for Manchester, about 53 miles away.
All of LA6 is within our area. Whether you live on Main Street, Boon Walks and Morewood Drive or a nearby road, we can come to you. Burton-in-Kendal is on the A6070, so it’s easy for us to reach. Other places close to Burton-in-Kendal include Clawthorpe (1 mile north), Dalton (1 mile east), Priest Hutton (2 miles south), Yealand Redmayne (2 miles west) and Yealand Conyers (2 miles south-west). We also work in nearby towns such as Lancaster (10 miles south), Morecambe (10 miles south-west), Heysham (12 miles south-west), Westfield War Memorial Village (10 miles south), Sandylands (11 miles south-west) and Carnforth (4 miles south-west).
Near you in Burton-in-Kendal
Locally, our jobs take us to homes close to St James' Church, among other places. For rail, the closest station is Silverdale station, roughly 3.5 miles west. Other landmarks nearby include Mourholme (2.8 miles south). Green spaces nearby include Warton Crag and Clawthorpe Fell.
Landlord and trade work in Burton-in-Kendal
Housing associations and facilities teams use us for planned and reactive repairs in Lancashire and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
For anyone letting property in or around Burton-in-Kendal, we will quote for several properties at once. Send photos for each one and we will come back with a combined price.
Common problems we fix in Burton-in-Kendal
Hard water speeds up the wear, and abrasive cleaners do the most damage.
Typical reasons for a call-out include:
- Several chips and rust patches
- A period or roll-top bath worth keeping
- A coloured bath you want in white
- A bath that stays dull however much you clean it
What to look for in a quote
- How soon you can use it again
- Whether cleaning and preparation are in the price
- How your room will be protected
- What happens if they find more damage
How the visit works
There’s not much you need to do on the day. Show us the job, point us to the room, and we’ll take it from there. Most visits take the best part of a day.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s generally ready the next day.
How to prepare
- Have somewhere for us to park nearby if possible
- Mention any earlier repairs or resurfacing
- Let us know about parking or access
Get a quote
Most clients in Burton-in-Kendal get their price from pictures. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
Read more
Towns and villages near Burton-in-Kendal
What else we do in Burton-in-Kendal
Keeping it looking good
Simple care helps the repair last. We recommend:
- Wash away dyes and oils after use
- Clean with a soft cloth and mild detergent
- Wipe the bath dry after use in hard water areas
- Keep suction mats out of the bath
A quick rinse and wipe after use helps, especially in hard water areas, so limescale cannot build up.
If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so have it stripped and resurfaced.
Your questions about bath re-enamelling in Burton-in-Kendal
Do you need to take the bath out?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
Can a failed resurfacing be redone?
Usually, yes. The old coating comes off before we resurface it. Mention it when you send photos.
Will there be a smell?
A little, depending on the job. Open windows and an extractor fan help.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.
Does re-enamelling smell?
A little, during the work. We set up ventilation and the smell fades as it cures.
Can you re-enamel a roll-top bath?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
Is it safe with children and pets around?
Please keep children and pets out of the room during the visit and until it has cured. The rest of the house is unaffected.
What areas do you cover?
We work UK-wide, and that includes Burton-in-Kendal. Prices do not change with location.
Materials and what they mean for the repair
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Repairing versus replacing in Burton-in-Kendal
For a sound bath, resurfacing costs far less than replacement, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s also far quicker. Our bath re-enamelling starts from £350. There are no surprise extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
Why Burton-in-Kendal customers choose us
- We leave the room as we found it
- Fixed prices from your pictures
- Most jobs done in one visit
- Colour mixed on the day to match
See our full price list or resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.
