Lancashire · England
Bath re-enamelling & resurfacing in Dalton, Lancashire
Bath re-enamelling in Dalton without the cost of replacing. Get a fixed price from your photos, then book a visit.
- Resurfacing from £350
- Lots of chips and rust spots
- Wear marks under the taps
Bath re-enamelling at your home in Dalton
After re-enamelling, the bath has a smooth, glossy, new-looking surface, but without the cost and upheaval of a refit. It’s ideal if you like your bathroom but not the state of the bath. If you are dealing with stains that won’t shift and a coloured bath you want in white, we can usually put it right, on basins & shower trays, Victorian roll-tops and acrylic baths alike.
You’re covered for a year from the day of the repair. If anything is not right, ring us and we’ll sort it.
- Location
- Dalton (LA6)
- Area hub
- Lancashire
- Guarantee
- 12 months on all our work
- Quotes
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
The process
Expect a friendly, tidy visit. We agree the arrival time in advance, protect the area, then carry out the work, which typically takes most of the day. If anything looks different from your photos, we’ll talk to you before going ahead.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- The bath is left to cure and can normally be used the next day.
Preparing for the visit
- Move bottles, mats and clutter away from the area
- Mention if the room is upstairs or in a flat
- Mention any parking restrictions or tricky access
Getting a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed price.
Related advice
What else we do in Dalton
Dalton and the surrounding area
Dalton is about 10 miles south of Kendal, in Lancashire. We travel to clients in Dalton and the surrounding area, so there is no workshop to go to. Dalton is one of 482 places in Lancashire we cover. You can also see our page for Manchester, about 53 miles away.
Jobs in LA6 are booked in the same way as anywhere else. Neighbouring places we cover include Burton-in-Kendal (1 mile west), Clawthorpe (1 mile north-west), Priest Hutton (2 miles south), Borwick (2 miles south) and Tewitfield (2 miles south-west). Further out, we also cover Lancaster (10 miles south), Morecambe (10 miles south-west), Heysham (12 miles south-west), Westfield War Memorial Village (10 miles south-west), Sandylands (11 miles south-west) and Carnforth (5 miles south-west).
Near you in Dalton
Around Dalton, we work in homes near St James' Church, among other places. The closest station to Dalton is Silverdale station, about 4.3 miles west. Nearby you’ll also find Mourholme (3.2 miles south-west). Not far away are Hawes Water and Clawthorpe Fell.
Repair or replace in Dalton?
If you like your bathroom but not your bath’s surface, re-enamelling is the least disruptive fix. Tiles, panels and taps stay put. Resurfacing from £350, with every job priced individually. No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
Why Dalton clients choose us
- Colour-matched on site
- A fixed quote before you book
- One visit for most repairs
- No extra charge for your area
Read our pricing and resurfacing vs replacement cost guide.
What we are called out for in Dalton
Enamel wears gradually. Years of cleaning, hard water and hot baths wear the gloss away, usually first under the taps and around the waste.
Contact us if you’ve noticed any of these:
- Staining under the taps and around the waste
- A dull, rough surface that won’t come clean
- Several chips and rust patches
- An original cast iron bath that needs restoring
Comparing quotes
- How the room is protected while they work
- A fixed quote, and whether VAT is included
- How to look after the finish
- What prep work is covered
How we price bath re-enamelling
Resurfacing from £350. Quotes are free and the price is fixed. What we take into account:
- Any earlier repairs that need removing first
- The size and number of damaged areas
- What the surface is made of
- Doing more than one item at once
The price reflects the work involved, not your postcode. The full price is agreed before booking, with nothing added on the day.
Getting a price from pictures
A couple of clear pictures is all it takes. It helps if you send:
- Any earlier repairs or coatings
- The postcode, so we can plan the visit
- One sharp close-up of the damage
- A coin or ruler next to the damage for scale
To get a price, send a couple of photos using our quote form or ring us. We’ll say right away whether it can be repaired.
Work for landlords and builders
If you manage property in Dalton, we can repair and quote for several addresses together. Send pictures for each one and we’ll come back with a combined price.
We work for landlords, letting agents and housing providers in Dalton as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Keeping it looking good
Good habits make a big difference to how long a repair lasts:
- Avoid suction-cup mats
- Leave the bath for the full curing time before using it
- Keep toiletries on a shelf rather than in the bath
- Don’t let dyes or oils sit on the finish
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Should I try a DIY kit first?
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
Different materials, different repairs
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s what we repair.
Dalton: your questions answered
Can you price it without visiting?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
Are you a vetted contractor?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Will you leave a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
What do you need from me?
Use the quote form or ring 0345 017 0787.
How much does bath re-enamelling cost in Dalton?
Prices start from £350. Because every job differs, we price from pictures. You know the full cost before anything is booked.
Can you change the colour of my bath?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
It’s been repaired before. Can you still fix it?
Most of the time. Let us know what was used before and we’ll plan for it.
How long does re-enamelling last?
A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.
About our accreditations · Every repair comes with a one-year guarantee.
