Lincolnshire · England
Bath Re-enamelling for Byard's Leap homes
We travel to Byard's Leap for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- Thin, worn enamel in places
- A coating lifting around the plughole
About our bath re-enamelling in Byard's Leap
Cast iron and steel baths are ideal for re-enamelling, and acrylic baths can be resurfaced too. The result is a smooth, even, glossy finish. Whether it’s a peeling or bubbling previous coating and stains that won’t shift, we can help, whatever the material.
You’re covered after we leave: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.
- Location
- Byard's Leap (NG34)
- Area hub
- Lincolnshire
- Warranty
- A year, on every repair
- Price
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
What we can’t put right
We’ll always be straight with you, so here’s what a repair can’t fix:
- A poorly supported acrylic bath, until it’s firmed up
- Steel that has corroded right through
- A metal bath with a through crack
Send us photos and we’ll tell you honestly before you book.
Surfaces we repair
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
Should I try a DIY kit first?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
How the visit works
Visits start with a quick look at the job together, so you know exactly what we are doing. Then the area is sheeted and masked and the work begins. It normally takes the best part of a day.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can usually be used the following day.
How to prepare
- Mention any earlier repairs or resurfacing
- Keep children and pets away from the room on the day
- Tell us if there are stairs or a lift
Get a quote
Upload photos of the damage and a wider shot of the entire item, and tell us you are in Byard's Leap, and we’ll reply with a fixed price.
Advice
Places near Byard's Leap
More services for Byard's Leap
When to call us in Byard's Leap
By the time a bath is a few decades old, it may have a mix of issues: dull areas, chips, rust and staining. Resurfacing sorts them out together.
Signs it’s time to call us include:
- Several chips and rust patches
- A peeling or bubbling previous coating
- A roll-top that is seen better days
- A coloured bath you want in white
Questions to ask before booking
- Whether they match the colour on site
- How long it needs to cure
- If travel is included in the price
- How your room will be protected
FAQs for Byard's Leap
Will the price change on the day?
Your quote covers the damage in the pictures. Anything extra is discussed before we begin.
I rent my home. Can I book you?
Of course. Check with your landlord; we can send the quote to them too.
Will the bath be moved?
No, it stays where it is. We work on the bath in place, with the room masked and ventilated.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Will there be a smell?
Expect a mild smell while we’re working, which fades afterwards.
Can you repair several things at once?
Yes. Doing several items on one visit usually costs less than separate visits. Send pictures of everything you’d like done.
Can pets and children be at home?
Keep pets and children away from the work area on the day, so the repair isn’t disturbed while it cures.
Do you come to Byard's Leap?
Yes, we do. Repair technicians travel to Byard's Leap from across the region, and the price is the same as everywhere else.
Byard's Leap and nearby
Byard's Leap is about 5 miles north-west of Sleaford, in Lincolnshire. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Our repair technicians cover all 732 towns and villages in Lincolnshire. Our jobs stretch from Byard's Leap to Leeds (68 miles away).
Every address in NG34 is within our area, from the main roads to the quietest streets. Neighbouring places we cover include Fulbeck (3 miles west), Normanton-on-Cliffe (3 miles south-west), Leadenham (3 miles north-west), Frieston (3 miles west) and Welbourn (3 miles north-west). Larger places within reach include Lincoln (13 miles north), Grantham (10 miles south-west), Sleaford (5 miles south-east), North Hykeham (11 miles north), Birchwood (13 miles north) and Woodhall Spa (15 miles north-east).
Around Byard's Leap
In Byard's Leap, that means homes near Cranwell Primary School (Foundation). The closest station to Byard's Leap is Ancaster station, about 3.1 miles south. A little further out are Cranwell Aviation Heritage Museum (2.1 miles south-east) and Rauceby Hospital (4.4 miles south-east).
- Parks and local facilities nearby include Cranwell and Byard's Leap (1.5 miles east)
How to look after the repair
Looking after the surface is easy:
- Don’t leave bottles, razors or sponges standing on the surface
- Leave the bath for the full curing time before using it
- Wash away dyes and oils after use
- Have chips seen to early
Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.
Rust spots on a worn bath get worse with time and make the job bigger. It’s simpler to resurface before they spread.
Landlords, agents and businesses in Byard's Leap
For anyone letting property in or around Byard's Leap, we will quote for several properties at once. Send pictures for each one and we’ll price them together.
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Should you replace it?
Replacement only makes sense in a few cases: if the bath is cracked through, if you want a different size or shape, or if you are refitting the whole room anyway. In most other cases, resurfacing is the better choice. Our bath re-enamelling starts from £350. A repair is priced on what needs doing, not where you live. You’ll see the full price before booking.
What you get with us
- CHAS, Constructionline and SafeContractor accredited
- Straight answers about what a repair can do
- Colour mixed on the day to match
- We come to you, anywhere in the UK
Read our pricing or resurfacing vs replacement cost guide.
How we price bath re-enamelling
Resurfacing from £350. You’ll know the full cost before you book. We take into account:
- Whether old repairs or coatings need taking off
- The colour and finish to match
- Access to the area
- The material and finish
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send photos and we’ll give you the exact figure.
Send pictures for a quote
It only takes a minute to photograph the damage, and it saves a visit. Please include:
- Natural light rather than flash
- Whether it’s been repaired or coated before
- A wider photo showing the whole bath
- The material, if you know it
To get a price, send two or three photos using our quote form or call us. We will say straight away if a repair is the right fix.
About our accreditations · Every repair comes with a one-year guarantee.
