Rochdale · England
Bath Re-enamelling for Calderbrook homes
Full bath re-enamelling and resurfacing for homes and businesses in Calderbrook and across Rochdale. Send photos for a free, fixed quote.
- Resurfacing from £350
- A coating lifting around the plughole
- Staining under the taps and around the waste
Bath re-enamelling at your home in Calderbrook
Resurfacing renews the entire surface of the bath without taking anything out. It suits baths that are dull, stained, rough or chipped all over. Whether it’s a roll-top that’s seen better days and brown or grey marks that don’t clean off, we can usually put it right.
A one-year guarantee comes as standard, so you’re not left on your own once we’ve gone.
- Where
- Calderbrook (OL15)
- County
- Rochdale
- Warranty
- A year, on every repair
- Price
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Honest limits
Not everything can be repaired, and we’ll tell you before we start. We can’t fix:
- Anything hidden under an old coating, until we remove it
- A bath that’s rusted through
- Plumbing leaks, which need a plumber
Not sure? Send photos and we will give you a straight answer.
Materials we work on in Calderbrook
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
Towns and villages near Calderbrook
More services for Calderbrook
Why repair rather than replace?
A refit takes several trades and several days. Re-enamelling takes one technician and generally one day, with the bath ready the next day. Our bath re-enamelling starts from £350. Rather than charging by the hour, we price the entire job up front. Damage, material and access decide it, and doing several items at once reduces it.
Why us?
- Colour-matched on site
- A fixed quote before booking
- One price list for the whole UK
- No need to remove anything
Take a look at our full price list and resurfacing vs replacement cost guide.
Prices and what affects them
Resurfacing from £350. We don’t charge extra for travel to Calderbrook. The price depends on:
- How many items we do on one visit
- Unusual colours or finishes
- Any earlier repairs that need removing first
- The material and finish
No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
Send pictures for a quote
It only takes a minute to photograph the damage. Please include:
- Your postcode, so we can check dates
- Good light, ideally daylight, without flash glare
- Any earlier repairs or coatings
- Any details about the material
The quickest way to a price is to send two or three pictures using our quote form or ring us. We will say straight away whether it can be repaired.
DIY kit or professional repair?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.
What happens on the day
Here’s how a visit typically runs: we arrive on time, sheet and mask the area around the job, carry out the work and tidy away. Plan for the best part of a day. Before we go, we will explain when it can be used and what to avoid for the first few days.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- Once cured, normally by the next day, the bath is ready.
Before we arrive
- Tell us about parking, stairs or access
- Tell us if there are stairs or a lift
- Avoid using the area for a few hours before we arrive
Getting a price
Getting a price is easy: snap the damage close up and then the entire item, send them to us with your postcode, and we will reply with a fixed quote. Quotes are free and no obligation.
Related advice
Your questions about bath re-enamelling in Calderbrook
Can you price it without visiting?
In nearly every case. If pictures do not show enough, we will ask for another angle.
What does bath re-enamelling cost?
Prices start from £350. We give a fixed price based on pictures of the damage. Send a close-up of the damage and a wider photo with your OL15 postcode.
Will you leave a mess?
No. The work area is masked and covered, and we take our waste away with us.
How do I book?
Use the quote form or ring 0345 017 0787, and we will take it from there.
Does re-enamelling smell?
Yes, while we are applying the finish. We set up ventilation and the smell fades as it cures.
Are there extra charges for Calderbrook?
No. Our quotes include travel, and we charge the same wherever you are.
Can you repair several things at once?
Yes. Doing several items on one visit usually costs less than separate visits. Include photos of each item.
How soon can you come?
We’ll give you dates with your quote. Tell us if you need it done quickly.
Keeping it looking good
Once the work has cured, treat it gently:
- Don’t leave bottles, razors or sponges standing on the surface
- Never use suction bath mats
- Don’t let dyes or oils sit on the finish
- Fix dripping taps quickly
Dry the bath after use if possible, especially in hard water areas, and rinse away any product left on the surface.
Do not try to scrub a worn bath back to shine. It removes more of the surface and makes resurfacing more work.
When to call us in Calderbrook
Hard water speeds up the wear, and gritty cleaners are the worst culprits.
It’s worth getting a quote if you see:
- Several chips and rust patches
- A bath in a colour that no longer suits
- A peeling or bubbling previous coating
- Enamel that is lost its shine and feels rough
Questions to ask before booking
- Who will actually do the work
- The length of the guarantee and what it covers
- What aftercare is recommended
- What happens if they find more damage
Calderbrook and the surrounding area
Calderbrook is about 1 mile north-east of Littleborough, in Rochdale. Whether you are in the middle of Calderbrook or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. Calderbrook is one of 46 towns and villages in Rochdale where we work. Our jobs stretch from Calderbrook to Manchester (about 13 miles away).
Here we cover the OL15 postcode area. We regularly work on streets such as Park Road, Ealees Road and Ferrand Road and the roads around them. With the A6033 close by, Calderbrook is easy for our technicians to reach. If you are just outside Calderbrook, we cover Summit (1 mile north), Timbercliffe (1 mile north-east), Rakewood (2 miles south), Warland (2 miles north) and Tunshill (2 miles south). Within a short drive, we also cover Rochdale (4 miles south-west), Middleton (8 miles south-west), Higher Blackley (10 miles south-west), Heywood (7 miles south-west), Langley (8 miles south-west) and Milnrow (3 miles south).
What’s near Calderbrook
Locally, our jobs take us to homes close to The Rake Inn, Wardle High School and Littleborough Community Primary School, among other places. Calderbrook’s nearest station is Littleborough station, about 0.5 miles south of the centre. Nearby you’ll also find Dobroyd Castle (4.2 miles north) and Butterworth (2.8 miles south). For a walk, there’s Stoodley Pike.
Materials and what they mean for the repair
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
About our accreditations · Every repair comes with a one-year guarantee.
