East Sussex · England
Bath re-enamelling & resurfacing in Camber, East Sussex
Bath re-enamelling in Camber without the cost of replacing. Send us photos for a fixed quote, then we come to you.
- Resurfacing from £350
- Thin, worn enamel in places
- A coloured bath you want in white
Aftercare tips
Much of the damage we repair could have been avoided. These habits help:
- Do not leave bottles, razors or sponges standing on the surface
- Do not let dyes or oils sit on the finish
- Don’t use the bath until it has fully cured
- Fix dripping taps quickly
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
Bath re-enamelling in Camber, done in place
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. Common call-outs are for chips and rust in more than one place and a dull, rough surface that won’t come clean, in Victorian roll-tops, acrylic baths and basins & shower trays.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Area
- Camber (TN31)
- Region
- East Sussex
- Guarantee
- A year, on every repair
- Price
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
More services for Camber
How the visit works
Visits start with a quick look at the job together. Then the area is sheeted and masked and we start. Allow a full day, and we’ll keep you posted as we go.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the next day.
How to prepare
- Tell us if there are stairs or a lift
- Plan for the room to be out of bounds to pets and children
- Keep a parking space free if you can
Get a quote
Send us a photo of the damage and a wider shot of the entire item, with your TN31 postcode, and we’ll reply with a fixed quote.
Advice
Repair or replace: which is better?
For a sound bath, resurfacing costs far less than replacement, when you count removal, plumbing, tiling and decorating. It’s much quicker too. Our bath re-enamelling starts from £350. Set against the cost of replacement, a repair is usually a fraction of the price, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
What you get with us
- One visit for most repairs
- No need to remove anything
- Straight answers about what a repair can do
- No extra charge for your area
Read our full price list or guide to resurfacing and replacement costs.
What we are called out for in Camber
Older baths frequently have several problems at once: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.
Look out for any of the following:
- A roll-top that is seen better days
- A bath in a colour that no longer suits
- Stains that won’t shift
- Thin, worn enamel in places
Questions to ask before you book
- Whether the price is fixed and includes VAT
- How to look after the finish
- Whether the price covers travel
- What preparation is included
Common questions in Camber
When can you do it?
Your quote comes with available dates. Tell us if you need it done quickly.
Is it safe with children and pets around?
Yes, as long as they stay out of the room we are working in. We’ll tell you when the room can be used again.
Can you do more than one item on the same visit?
Yes, and it’s frequently cheaper. Just add the extra items to your pictures and we’ll quote them together.
Is there a smell?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It clears as the finish cures.
Do the materials smell?
Expect a mild smell while we’re working, which fades afterwards.
Can you redo someone else’s repair?
Yes, regularly. It can add a little time, which we include in the quote.
Can you do the outside of a roll-top?
Yes, often. The inside is resurfaced, and we can refinish the outside as well.
Will you leave a mess?
No. The work area is masked and covered, and we take our waste away with us.
What a repair can’t fix
Before booking, it’s worth knowing the limits too:
- A bath split right through the body
- A bath that is rusted through
- Plumbing leaks, which need a plumber
If in doubt, send pictures and we’ll say what we think.
Materials we repair
- Acrylic baths
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
About Camber
Camber is about 11 miles north-east of Hastings, in East Sussex. Our technicians come to customers in Camber and the surrounding area, so there’s no workshop to go to. Our repair technicians cover 289 places across East Sussex. We work right across the region, from Camber to London (55 miles away).
We work across TN31. That includes homes on Denham Way, Scotts Acre and Old Lydd Road and the roads around them. Neighbouring places we cover include Rye Harbour (1 mile west), East Guldeford (2 miles north-west), Rye (3 miles west), Playden (3 miles north-west) and Houghton Green (3 miles north-west). Within a short drive, we also cover Hastings (11 miles south-west), Bexhill-on-Sea (15 miles south-west), St Leonards (12 miles south-west), Hastings Old Town (10 miles south-west), Belmont (10 miles south-west) and Hollington (11 miles west).
Near you in Camber
We visit homes around St Thomas the Apostle, among other places. For rail, the closest station is Rye station, roughly 2.9 miles north-west. Further afield, we also cover the area around Camber Castle (2.6 miles west) and Rye Castle Museum (East Street) (2.7 miles west). The countryside around Camber includes Rye Harbour Nature Reserve and Burnthouse Pen.
Landlords, agents and businesses in Camber
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Landlords, letting agents and housing providers in Camber use us as well as householders. Repairing between tenancies keeps void periods short, and it normally costs far less than a refit.
Different materials, different repairs
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. The bath needs to be firm and well supported for the finish to last.
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Steel frequently rusts by the plughole, so we pay close attention there.
How we price bath re-enamelling
Resurfacing from £350. Every quote is fixed and free. What we look at:
- Access to the area
- What the surface is made of
- Doing more than one item at once
- How hard the colour is to match
We don’t add extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Send photos for a quote
Good photos mean an accurate price. Here’s what helps:
- A clear, close picture of the problem area
- The postcode, so we can plan the visit
- Whether it’s been repaired or coated before
- A coin or ruler next to the damage for scale
You don’t need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
About our accreditations · Every repair comes with a one-year guarantee.
