North Lanarkshire · Scotland
Bath Re-enamelling in Carfin
Bath re-enamelling in Carfin without the cost of replacing. Send us pictures for a fixed price, then book a visit.
- Resurfacing from £350
- Enamel that is lost its shine and feels rough
- Chips and rust in more than one place
Honest limits
Not everything can be repaired, and we’d rather say so up front. Repairs will not solve:
- A bath that’s rusted through
- Damage hidden under a previous coating, until it’s stripped back
- An acrylic bath that flexes badly underfoot
If in doubt, send photos and we will say what we think.
Materials we repair
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
Bath re-enamelling at your home in Carfin
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. We’re often asked to fix a roll-top that’s seen better days and enamel that’s lost its shine and feels rough, on basins & shower trays, pressed steel baths and cast iron baths.
Every repair is covered by our one-year guarantee.
- Area
- Carfin (ML1)
- Area hub
- North Lanarkshire
- Guarantee
- One year on every repair
- Price
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
The process
On the day, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take the best part of a day. We tidy up before we leave and tell you when it’s ready to use.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Mention any parking restrictions or tricky access
- Avoid using the area for a few hours before we arrive
- Move bottles, mats and clutter away from the area
Getting a price
Pricing is simple: snap the damage close up and then the entire item, send them over with your postcode, and you’ll get a fixed quote back. There’s no charge for the quote and no obligation.
Read more
FAQs for Carfin
When can you do it?
We’ll give you dates with your quote. If it’s urgent, say so and we will do what we can.
Will you leave a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
Will the price change on the day?
If we find something the pictures didn’t show, we explain it first. The price only changes if you agree.
I rent my home. Can I book you?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Can you change the colour of my bath?
Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.
Will the bath be moved?
Not at all. Everything is done in your bathroom, with the room protected and ventilated.
Do you charge for travel?
Travel is included in the price, and we charge the same wherever you are.
Can a failed resurfacing be redone?
Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.
Keeping it looking good
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Don’t use the bath until it has fully cured
- Stick to gentle, non-abrasive cleaners
- Avoid suction-cup mats
- A dripping tap should be fixed promptly
The first few days matter most: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further.
Can I fix it myself?
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
If you’re set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and do not use it until it has fully cured. If it fails, we can still put it right.
Why repair rather than replace?
Replacement only makes sense in a few cases: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing normally wins. Our bath re-enamelling starts from £350. Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and combining items on one visit brings it down.
Why choose Surface Doctor in Carfin
- Technicians who travel to you, UK-wide
- Fixed prices from your photos
- Most jobs done in one visit
- Nothing taken out or refitted
Take a look at our prices page or bath cost comparison.
Materials and what they mean for the repair
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Steel frequently rusts by the plughole, so we pay close attention there.
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Places near Carfin
Other services in Carfin
What we’re called out for in Carfin
Older baths often have several problems at once: dull areas, chips, rust and staining. Resurfacing sorts them out together.
Most people get in touch when they notice something like this:
- A bath that stays dull however much you clean it
- Wear marks under the taps
- A period or roll-top bath worth keeping
- Stains that will not shift
Before you book anyone
- How changes to the job are handled
- What the guarantee covers, and for how long
- How your room will be protected
- Who turns up on the day
Prices and what affects them
Resurfacing from £350. Prices are worked out job by job, from your photos. The main factors are:
- Unusual colours or finishes
- Whether it’s a chip, crack, burn or wear
- Doing more than one item at once
- Any earlier repairs that need removing first
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Send photos for a quote
Phone pictures are fine. Just ensure we can see:
- Where you are, by postcode
- A picture taken from further back
- A close-up of the damage, in focus
- Something in shot to show the size
If you are in Carfin and want a price, photos are the quickest way: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.
Carfin and the surrounding area
Carfin is about 1 mile north-east of Motherwell, in North Lanarkshire. We visit homes and businesses in Carfin and the surrounding area, so you don’t need to take anything anywhere. Our technicians cover 89 places in North Lanarkshire. Our jobs stretch from Carfin to Glasgow (13 miles away).
Jobs in ML1 work the same way as everywhere else we cover. Local streets include Ardbeg Road, Glen Ord Road and New Craig Road. Other places close to Carfin include New Stevenston (1 mile north-west), Holytown (1 mile north), Newarthill (2 miles north-east), Cleland (2 miles east) and Biggar Road (2 miles east). Within a short drive, we also cover Cumbernauld (10 miles north), Coatbridge (4 miles north-west), Airdrie (5 miles north), Bellshill (3 miles north-west), Kilsyth (13 miles north) and Burnfoot (5 miles north).
Local landmarks in Carfin
Typical jobs here are in homes near Taylor High School, The Raven's Cliff pub and Duchess of Hamilton Park, among other places. For rail, the closest station is Carfin station, roughly 0.6 miles north-east of the centre. A little further out are University Hospital Wishaw (2.1 miles south-east) and Brandon Shopping Centre (1.3 miles south-west). Open spaces near Carfin include Strathclyde Loch and Baron's Haugh RSPB Reserve.
About our accreditations · Every repair comes with a one-year guarantee.
