Norfolk · England

Bath Re-enamelling for Carleton Forehoe homes

Bath re-enamelling in and around Carleton Forehoe: a fixed quote from photos, a tidy visit and a one-year guarantee.

  • Resurfacing from £350
  • Chips and rust in more than one place
  • A coloured bath you want in white
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath re-enamelling in Carleton Forehoe

How we handle bath re-enamelling in Carleton Forehoe

Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. Common call-outs are for enamel that’s lost its shine and feels rough and several chips and rust patches, in acrylic baths, cast iron baths and Victorian roll-tops.

A one-year guarantee comes as standard, so you’re covered after the visit.

Basin with yellowed glaze resurfaced to a clean white finish
Area
Carleton Forehoe (NR9)
Region
Norfolk
Guarantee
One year on every repair
Price
From £350. Fixed and free, based on photos
Phone
0345 017 0787
Page updated
23 October 2026

How to look after the repair

Once the work has cured, treat it gently:

  • Respect the curing time we give you
  • Do not let dyes or oils sit on the finish
  • Never use suction bath mats
  • Dry the bath after use to stop limescale

A quick rinse and wipe after use helps, especially in hard water areas, so limescale can’t build up.

Worn enamel only gets rougher with time, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.

DIY kit or professional repair?

A DIY attempt isn’t a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.

DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

What a repair cannot fix

We’ll always be straight with you, so here’s what a repair will not do:

  • A metal bath with a through crack
  • An acrylic bath that flexes badly underfoot
  • Anything hidden under an old coating, until we remove it

Send us pictures and we’ll tell you honestly before you book.

What we work on

  • Victorian roll-tops
  • Acrylic baths
  • Basins & shower trays
  • Cast iron baths
  • Pressed steel baths

What affects the price in Carleton Forehoe

Resurfacing from £350. There are no hourly rates or hidden extras. The price depends on:

  • Whether old repairs or coatings need taking off
  • Access to the area
  • How hard the colour is to match
  • What the surface is made of

Set against the cost of replacement, repairing normally costs far less, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.

Getting a price from pictures

You can take the photos on your phone, there’s no need for anything special. Ensure they show:

  • A clear, close picture of the problem area
  • What it’s made of, if you know
  • The postcode, so we can plan the visit
  • A coin beside the damage so we can judge size

A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them over. You’ll get a fixed quote, not an estimate.

Signs you need bath re-enamelling in Carleton Forehoe

Enamel doesn’t fail overnight. Abrasive cleaners, limescale and years of use dull the surface, typically first under the taps and around the waste.

The things clients normally mention when they call include:

  • A roll-top that’s seen better days
  • A bath in a colour that no longer suits
  • A peeling or bubbling previous coating
  • Several chips and rust patches

What your quote should include

  • The length of the guarantee and what it covers
  • Whether the price is fixed and includes VAT
  • If travel is included in the price
  • Who turns up on the day

How to compare quotes

FAQs for Carleton Forehoe

Can you do the outside of a roll-top?

Yes. We can do the inside and outside.

Do you charge for travel?

There is no separate call-out charge. The fixed price covers the visit and the work.

Will the bath be moved?

No. It’s re-enamelled where it stands, so nothing else is disturbed.

Can you repair something that is been repaired before?

Generally, yes. We remove the old repair before doing a new one, so mention it when you send photos.

What happens next?

We come back with a fixed quote. There is no obligation to book.

Do you do work for letting agents?

Yes. We work for landlords, agents, builders and businesses as well as householders.

Can I add another job to the visit?

Yes, and it’s frequently cheaper. Send pictures of everything together and you’ll get one combined price.

How long does re-enamelling last?

That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.

Our work in Carleton Forehoe

Carleton Forehoe is about 3 miles north-west of Wymondham, in Norfolk. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Carleton Forehoe is one of 797 towns and villages in Norfolk we cover.

Our visits in NR9 work the same way as everywhere else we cover. We also cover the places around Carleton Forehoe: Barnham Broom (1 mile north-west), Brandon Parva (2 miles north-west), Coston (2 miles west), Danemoor Green (2 miles west) and Runhall (3 miles north-west). Further out, we also cover Norwich (9 miles east), Dereham (8 miles north-west), Wymondham (3 miles south-east), Sprowston (10 miles east), Thorpe St Andrew (11 miles east) and Attleborough (7 miles south-west).

Around Carleton Forehoe

Typical jobs here are in homes near Church of St Mary and the streets around them. The nearest railway station is Wymondham station, roughly 3.2 miles south of the centre. Nearby you will also find Norfolk and Norwich University Hospital (5.5 miles east) and Wymondham Heritage Museum (2.8 miles south-east).

Map of Carleton Forehoe © OpenStreetMap contributors

How it works

The work is clean and fairly quiet. We protect the area first, then the work takes a full day. At the end we talk you through how soon it can be used and how to look after it.

  1. We check the bath and agree the finish with you.
  2. Everything around the bath is masked and covered.
  3. The bath is degreased, repaired and keyed.
  4. Primer and finish coats are applied.
  5. We remove the masking, tidy up and give you the curing time.

Getting ready for the visit

  • Have somewhere for us to park nearby if possible
  • Let the surface dry out before the visit
  • Have a window or extractor fan available

Getting a price

Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can price the job the same day in most cases.

Get a fixed quote

Advice

Repairs by material

Acrylic

Acrylic baths can be resurfaced too, using a system that bonds to acrylic. The bath needs to be firm and well supported for the finish to last.

Pressed steel

Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.

Work for landlords and builders

Letting agents often send us photos straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.

We work for landlords, letting agents and housing providers in Carleton Forehoe as well as homeowners. A repair between tenants keeps the property empty for less time, and it usually costs far less than a refit.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.