Gloucestershire · England
Bath Re-enamelling in Chaxhill
We travel to Chaxhill for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- A peeling or bubbling previous coating
- Enamel that’s lost its shine and feels rough
Why repair rather than replace?
Getting a cast iron bath out is hard work: they’re heavy, frequently need breaking up, and a new one isn’t cheap. Resurfacing in place avoids that entirely. Resurfacing from £350, with every job priced individually. Rather than charging by the hour, we price the entire job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
Why Chaxhill customers choose us
- Honest advice, even when it means no job
- One price list for the whole UK
- Everything repaired in place
- One-year guarantee on every repair
Read our pricing or guide to resurfacing and replacement costs.
Bath re-enamelling in Chaxhill, done in place
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. We work on acrylic baths, pressed steel baths and cast iron baths, and people most frequently call us about lots of chips and rust spots and worn patches where water runs and sits.
All our work is covered by our one-year guarantee.
- Area
- Chaxhill (GL14)
- County
- Gloucestershire
- Cover
- One year on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Can I fix it myself?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
How it works
Expect a friendly, tidy visit. We confirm the time with you beforehand, protect the area, then carry out the work, which normally takes a full day. If we find something your pictures didn’t show, we’ll explain it before carrying on.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the following day.
Before we arrive
- Tell us about any previous repairs or coatings
- Clear toiletries, mats and anything else from around the area
- Keep a parking space free if you can
Get a quote
To get a price, send two or three photos through our quote form or ring us. We will say straight away if a repair is the right fix.
Related advice
Different materials, different repairs
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is what we repair.
When to call us in Chaxhill
Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. We strip what’s failing and start again.
The most common problems we’re called about are:
- Worn patches where water runs and sits
- An original cast iron bath that needs restoring
- A peeling or bubbling previous coating
- A coloured bath you want in white
Questions to ask before you book
- Who will actually do the work
- Aftercare advice
- The length of the guarantee and what it covers
- Whether they match the colour on site
Looking after it afterwards
To keep it looking its best for years:
- Don’t let dyes or oils sit on the finish
- Keep toiletries on a shelf rather than in the bath
- Fix dripping taps quickly
- Don’t use the bath until it has fully cured
Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.
Do not try to scrub a worn bath back to shine. It just wears the enamel further and makes resurfacing more work.
Places near Chaxhill
Other services in Chaxhill
Chaxhill and nearby
Chaxhill is about 4 miles west of Quedgeley, in Gloucestershire. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. Chaxhill is one of 470 towns and villages in Gloucestershire we cover. We work right across the region, from Chaxhill to Birmingham (about 49 miles away).
We work across GL14 and the streets around it. Neighbouring places we cover include Stanley (1 mile south), Stantway (1 mile west), Rodley (2 miles south), Oakle Street (2 miles north-east) and Birdwood (3 miles north). We also work in nearby towns such as Cheltenham (13 miles east), Gloucester (6 miles east), Stroud (8 miles south-east), Tewkesbury (15 miles north-east), St Paul's (14 miles east) and Lansdown (14 miles east).
Landmarks near Chaxhill
Our clients here include homes close to Walmore Hill Primary School and the streets around them. Nearby you’ll also find Gloucestershire Royal Infirmary (5.9 miles north-east) and Haresfield Mount (4.7 miles south-east). Not far away are Highnam Woods.
Your questions about bath re-enamelling in Chaxhill
Do I have to be there?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.
Can tenants book a repair?
Yes. Ask your landlord first, and we can send them the quote if that helps.
Do you work for landlords and businesses?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses in Chaxhill.
Will there be fumes?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
When can you do it?
We will give you dates with your quote. If it’s urgent, say so and we’ll do what we can.
Can you fix a peeling bath coating?
Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.
Can you do the outside of a roll-top?
Yes. We can do the inside and outside.
Prices and what affects them
Prices start from £350. There’s no area surcharge for Chaxhill. The price reflects:
- What the surface is made of
- The size and number of damaged areas
- Any earlier repairs that need removing first
- How easy the damage is to reach
A repair usually costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
How to get a fixed price
You can generally get a fixed price without us visiting. To help us price it:
- A coin beside the damage so we can judge size
- Natural light rather than flash
- The material, if you know it
- Your postcode, so we can check dates
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them over. What comes back is a fixed price, not a guess.
For landlords and businesses
If you manage property in Chaxhill, we will quote for several properties at once. Send pictures for each one and we’ll come back with a combined price.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
About our accreditations · Every repair comes with a one-year guarantee.
