Derbyshire · England
Bath re-enamelling & resurfacing in Chelmorton, Derbyshire
Full bath re-enamelling and resurfacing for homes and businesses in Chelmorton and across Derbyshire. Free, fixed quotes from your pictures.
- Resurfacing from £350
- A roll-top that’s seen better days
- Wear marks under the taps
Your questions about bath re-enamelling in Chelmorton
What happens if you find more damage?
If we find something the photos didn’t show, we explain it first. The price only changes if you agree.
Can a failed resurfacing be redone?
In most cases. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
Do I need to be at home?
We need someone to let us in. You do not need to watch us work.
How do I book?
Some photos, your postcode and how to reach you. On the day, we only need access to the room.
Can tenants book a repair?
Yes, though it’s best to check with your landlord first. Landlords are often glad to have it sorted.
Which areas do you work in?
Across the UK, so Chelmorton is covered. Prices don’t change with location.
Is it safe with children and pets around?
On the day, the room should be kept clear of pets and children, so the repair is not disturbed while it cures.
Can you resurface a pink bath in white?
Yes, white is the usual choice. Mention the colour you want when you send photos.
About our bath re-enamelling in Chelmorton
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. Our technicians work on cast iron baths, acrylic baths and pressed steel baths, and the jobs we see most are lots of chips and rust spots and a coating lifting around the plughole.
You get a one-year guarantee, the same in Chelmorton as everywhere else we work.
- Location
- Chelmorton (SK17)
- County
- Derbyshire
- Cover
- 12 months on all our work
- Quotes
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
How the visit works
On the day, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. Expect it to take a full day. We clean up when we are done and tell you when it’s ready to use.
- We mask and protect the room and ventilate it.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- Once cured, normally by the following day, the bath is ready.
Before we arrive
- Clear the area around the damage
- Keep pets and children out of the room while we work
- Have somewhere for us to park nearby if possible
How to get a price
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can price the job.
Related advice
Keeping it looking good
Looking after the surface is easy, and it makes a real difference:
- Wipe the bath dry after use in hard water areas
- A dripping tap should be fixed promptly
- Do not leave a chip unrepaired
- Don’t leave bottles, razors or sponges standing on the surface
Stick to mild, non-abrasive cleaners, do not use suction bath mats, and keep bottles and razors off the surface.
Rust spots on a worn bath get worse with time and make the job bigger. Resurfacing before they spread keeps it simpler.
When to call us in Chelmorton
Older baths frequently have several problems at once: dull areas, chips, rust and staining. Resurfacing sorts them out together.
Get in touch if you’ve noticed any of these:
- Stains that will not shift
- Thin, worn enamel in places
- A coloured bath you want in white
- Enamel that’s lost its shine and feels rough
Questions to ask before booking
- If travel is included in the price
- Aftercare advice
- How the colour is matched
- How the room is protected while they work
DIY repairs versus a professional job
If you are set on a kit, follow its instructions closely, and give it the full curing time. If it does not work out, we can still repair it properly.
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.
Also near Chelmorton
What else we do in Chelmorton
When a repair isn’t the answer
We will always be straight with you, so here’s what a repair won’t do:
- Leaking taps or wastes (a plumber’s job)
- A cast iron or steel bath that’s cracked right through
- Damage hidden under a previous coating, until it’s stripped back
Not sure? Send pictures and we will give you a straight answer before you book.
Materials we work on in Chelmorton
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
Where we work around Chelmorton
Chelmorton is about 4 miles south-east of Buxton, in Derbyshire. We visit clients in Chelmorton, so there’s no workshop to go to. Chelmorton is one of 532 places in Derbyshire where we work. Our nearest city page is Manchester, about 23 miles away.
Postcode districts we cover here: SK17. We regularly work on streets such as Main Street, Common Lane and Church Lane. Neighbouring places we cover include Earl Sterndale (2 miles south-west), Harpur Hill (3 miles west), Staden (3 miles north-west), Upper End (4 miles north) and Batham Gate (4 miles north-west). Larger places within reach include Buxton (4 miles north-west), Matlock (13 miles south-east), New Mills (12 miles north-west), Chapel-en-le-Frith (7 miles north-west), Bakewell (7 miles east) and Ashgate (15 miles east).
Landmarks near Chelmorton
Typical jobs here are in homes near Church of St John the Baptist and The Church Inn and the streets around them. The nearest railway station is Buxton station, roughly 4 miles north-west. Nearby you will also find Scriveners Books Victorian Museum (3.8 miles north-west) and Buxton Hospital (3.4 miles north-west). The countryside around Chelmorton includes Harpur Hill Quarry and Taddington Moor.
What bath re-enamelling costs
Prices start from £350. We charge the same across the UK, including Chelmorton. The price reflects:
- Doing more than one item at once
- How many areas need work
- How easy the damage is to reach
- Whether it’s a chip, crack, burn or wear
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
Quotes from your photos
Most quotes are done from pictures alone. To help us price it:
- Where you are, by postcode
- A coin or ruler next to the damage for scale
- A picture taken from further back
- What it’s made of, if you know
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them over. What comes back is a fixed price, not a guess.
Materials and what they mean for the repair
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel frequently rusts by the plughole, so we check it carefully.
Why repair rather than replace?
If you like your bathroom but not your bath’s surface, re-enamelling is the least disruptive fix. Tiles, panels and taps stay put. Resurfacing from £350, with every job priced individually. Compared with replacing, repairing typically costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
Why book with us
- Every repair guaranteed for a year
- Accredited with CHAS, Constructionline and SafeContractor
- Everything repaired in place
- Colours mixed by hand to suit your surface
See our full price list or guide to resurfacing and replacement costs.
About our accreditations · Every repair comes with a one-year guarantee.
