Kent · England
Bath re-enamelling & resurfacing in Chilton, Kent
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Chilton. Send photos for a free, fixed quote.
- Resurfacing from £350
- Lots of chips and rust spots
- A dull, rough surface that won’t come clean
What bath re-enamelling costs
Prices start from £350. There’s no charge for travel to Chilton. The price comes down to:
- What the surface is made of
- Any earlier repairs that need removing first
- The size and number of damaged areas
- Whether it’s a chip, crack, burn or wear
No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
How to get a fixed price
Almost every job we do is priced from pictures. This is what we need:
- A photo taken from further back
- A clear, close picture of the problem area
- Something in shot to show the size
- Any details about the material
There is no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.
Bath re-enamelling at your home in Chilton
Re-enamelling gives a worn bath a new glossy surface without a refit. It suits baths that are dull, stained, rough or chipped all over. Whether it’s staining under the taps and around the waste and a bath that stays dull however much you clean it, we can normally put it right.
You get a one-year guarantee, the same in Chilton as everywhere else we work.
- Area
- Chilton (CT11, CT12)
- Region
- Kent
- Guarantee
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Honest limits
Some jobs are not right for a repair, including:
- Leaks from fittings rather than the bath
- Anything hidden under an old coating, until we remove it
- A bath split right through the body
Send us pictures and we’ll tell you honestly before you book.
Surfaces we repair
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
Repairs by material
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. It must be solid and not flex underfoot.
Chilton and nearby
Chilton is about 1 mile south-west of Ramsgate, in Kent. Jobs in Chilton are booked in like any other job: a fixed quote from pictures, and a technician at your door on the day. Chilton is one of 922 places in Kent we cover. We work right across the region, from Chilton to London (65 miles away).
Our repair technicians cover all of the CT11 and CT12 postcode area. You will find streets such as Saxon Road, Downs Road and Edith Road, all of which we cover. Chilton sits on or near the A299, so getting to you is simple. Nearby, we also work in Pegwell (1 mile south), Cliffs End (1 mile west), Newington (1 mile north), Manston (1 mile north-west) and Haine (2 miles north). Within a short drive, we also cover Canterbury (14 miles west), Margate (3 miles north), Dover (14 miles south), Broadstairs (3 miles north-east), Deal (8 miles south) and Herne Bay (11 miles west).
Local landmarks in Chilton
Our customers here include homes close to Chilton Primary School, Churchill House School With Railed Area and Chatham House Grammar School, among other places. Other local landmarks include Church of St Laurence (0.6 miles north-east), The Belle Vue pub (within half a mile south) and Sandwich and Pegwell Bay (1.7 miles south-west). For rail, the closest station is Ramsgate station, roughly 0.9 miles north-east of the centre. A little further out are Westwood Cross (1.9 miles north) and Ramsgate Tunnels (0.9 miles east). Green spaces nearby include Sandwich and Pegwell Bay.
Towns and villages near Chilton
More services for Chilton
How the visit works
Once we are through the door, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the work takes most of the day, depending on what we find, and we finish by cleaning up and talking you through the result.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Preparing for the visit
- Clear toiletries, mats and anything else from around the area
- Make sure the room can be ventilated
- Let the surface dry out before the visit
Get a quote
Most clients in Chilton get their price from photos. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
Advice
Your questions about bath re-enamelling in Chilton
What happens after I send photos?
We look at the photos and reply with a fixed price and some dates. If anything’s unclear, we’ll ask for another photo.
Can you do the outside of a roll-top?
Yes. We can do the inside and outside if you’d like.
Can you do more than one item on the same visit?
Yes, and it’s often cheaper. Just add the extra items to your pictures and you will get one combined price.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Do the materials smell?
Some materials have a smell while they’re applied, so we ventilate the room. It clears as the materials cure.
What areas do you cover?
Across the UK. Our prices are the same everywhere.
It’s been repaired before. Can you still fix it?
Yes, regularly. Removing the old work can add time, and that is in the quote.
Is a repair better than a new one?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we’ll tell you.
Looking after it afterwards
So the finish stays in good condition:
- Avoid suction-cup mats
- Leave the bath for the full curing time before using it
- Have chips seen to early
- Don’t leave bottles, razors or sponges standing on the surface
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
Leave a peeling coating alone. Water gets under it and the damage spreads, so have it stripped and resurfaced.
Should you replace it?
Replacing the bath means a plumber, removing a heavy bath, re-tiling or making good the walls and several days without a working bathroom. Re-enamelling renews the entire surface with the bath left where it is. Resurfacing from £350, with every job priced individually. Compared with replacing, repairing generally costs far less, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Why choose Surface Doctor in Chilton
- Work done at your home or business
- Every repair guaranteed for a year
- CHAS, Constructionline and SafeContractor accredited
- No extra charge for your area
Read our prices page or bath cost comparison.
What we’re called out for in Chilton
Many baths we resurface have simply been well used. The body of the bath is generally perfectly sound.
Typical reasons for a call-out include:
- An outdated colour you’d like to change
- Several chips and rust patches
- An old resurfacing that’s failing
- Stains that won’t shift
What to look for in a quote
- Whether the colour is mixed to match
- How long the guarantee is and what it covers
- Whether a trained technician does the job
- How your room will be protected
DIY kit or professional repair?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.
About our accreditations · Every repair comes with a one-year guarantee.
