Essex · England
Bath re-enamelling & resurfacing in Church End, Essex
Problem with your bath in Church End? We repair it in place, match it on site and back it with a one-year guarantee.
- Resurfacing from £350
- Thin, worn enamel in places
- Chips and rust in more than one place

Common questions in Church End
How long is the bath unusable?
One day for most baths, ready the following day. We’ll confirm timings when we quote.
Is repairing better than replacing?
Typically, when the rest is in good condition. A repair avoids removal and making good. We will tell you honestly if replacement makes more sense.
Will it make a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
How much does bath re-enamelling cost in Church End?
Prices start from £350. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
Will the bath be moved?
No. We resurface it in place, so nothing else is disturbed.
What information do you need?
Just photos, your postcode and a contact number. On the day, we only need access to the room.
Does someone need to be in?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
When can you do it?
It depends on the time of year and where you are. We will offer you dates when we send your quote.
About our bath re-enamelling in Church End
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. Typical jobs include chips and rust in more than one place and an old resurfacing that’s failing, across pressed steel baths, acrylic baths and Victorian roll-tops.
A one-year guarantee comes as standard, so you’re not left on your own once we’ve gone.
- Where
- Church End (CB10)
- Area hub
- Essex
- Warranty
- A year, on every repair
- Quote
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026

Landlords, agents and businesses in Church End
Letting agents often send us photos straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit.
Church End and the surrounding area
Church End is about 3 miles north-east of Saffron Walden, in Essex. We agree a date that works for you, and we’ll give you an arrival time in advance, so there’s no waiting around. We cover all 644 towns and villages in Essex. Our jobs stretch from Church End to London (42 miles away).
Postcode districts we cover here: CB10. Whether you live on All Saints Close, Church Field and Walden Road or a nearby road, a technician can come to you. If you are just outside Church End, we cover Ashdon (1 mile north-east), Steventon End (1 mile north-east), Bartlow (2 miles north), The Common (3 miles south-east) and Maple End (3 miles south). Within a short drive, we also cover Saffron Walden (3 miles south-west), Great Dunmow (12 miles south), Stansted Mountfitchet (11 miles south-west), Elsenham (10 miles south), Sible Hedingham (13 miles east) and Church End (12 miles south).
What’s near Church End
Our customers here include homes close to Church of All Saints, Ashdon Primary School and Rose And Crown Inn. The closest station to Church End is Great Chesterford station, roughly 4.7 miles west of the centre. A little further out are Saffron Walden Community Hospital (2.5 miles south-west) and Castle Camps (3 miles east). Open spaces near Church End include Hales and Shadwell Woods and Rivey Hill.
- Other local spots include Bartlow End (1.2 miles north-east)
The process
We work cleanly and quietly. We protect the area first, then the work takes the best part of a day. At the end we talk you through the curing time and the aftercare.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
Getting ready for the visit
- Mention any parking restrictions or tricky access
- Avoid using the area for a few hours before we arrive
- Tell us if there are stairs or a lift
How to get a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can price the job the same day in most cases.
Related advice
DIY repairs versus a professional job
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Repairs by material
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. The bath needs to be firm and well supported.
When to call us in Church End
Older baths often have several problems at once: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.
If you can see any of these, send us a photo:
- A dull, rough surface that will not come clean
- A coloured bath you want in white
- Thin, worn enamel in places
- An old resurfacing that is failing
Comparing quotes
- What preparation is included
- Who will actually do the work
- How changes to the job are handled
- Whether the price covers travel
Prices and what affects them
Resurfacing from £350. We do not charge extra for travel to Church End. The price comes down to:
- Access to the area
- How much damage there is
- How hard the colour is to match
- What the surface is made of
We don’t add extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
Getting a price from photos
Most quotes are done from photos alone. To help us price it:
- Your postcode, so we can check dates
- One picture of the whole bath
- A close-up of the damage, in focus
- Any details about the material
You do not need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will reply with a fixed price.
How to care for the repair
It’s all simple stuff:
- Do not leave a chip unrepaired
- A quick wipe after use keeps limescale away
- Never use suction bath mats
- Repair dripping taps early
Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.
If a previous coating is starting to peel, don’t pick at it. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
When a repair isn’t the answer
In fairness, there are a few things a repair will not fix:
- Damage hidden under a previous coating, until it’s stripped back
- Steel that has corroded right through
- A cast iron or steel bath that’s cracked right through
Send us photos and we will tell you honestly before booking.
Materials we work on in Church End
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
- Cast iron baths
- Basins & shower trays
Also near Church End
What else we do in Church End
About our accreditations · Every repair comes with a one-year guarantee.

