Pembrokeshire · Wales
Bath Re-enamelling for Clarbeston Road homes
Bath re-enamelling in and around Clarbeston Road: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- A bath that stays dull however much you clean it
Bath re-enamelling in Clarbeston Road without replacing anything
Many of the baths we re-enamel are period roll-tops, which would be difficult and expensive to replace. Resurfacing them in place keeps the original bath. Typical jobs include an old resurfacing that’s failing and stains that won’t shift, on Victorian roll-tops, basins & shower trays and acrylic baths.
We stand behind the work with a one-year guarantee, so you’re covered after the visit.
- Area
- Clarbeston Road (SA63)
- Area hub
- Pembrokeshire
- Warranty
- One year on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
FAQs for Clarbeston Road
Does the bath have to be removed?
Not at all. We work on the bath in place, with the room masked and ventilated.
What happens after I send pictures?
You get a fixed price and available dates. If anything’s unclear, we will ask for another photo.
Does someone need to be in?
Yes. We need access to the room while we work, at a time we agree with you.
Do you cover the whole of Pembrokeshire?
We work UK-wide. Our prices are the same everywhere.
Do you resurface freestanding baths?
Yes, frequently. The inside is resurfaced, and we can refinish the outside as well.
Will the new finish last?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.
Can you make a coloured bath white?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
I rent my home. Can I book you?
Yes. Ask your landlord first, and we can send them the quote if that helps.
Aftercare tips
A little care keeps the finish looking good. Our advice:
- Don’t use the bath until it has fully cured
- Store bottles off the bath
- Wipe the bath dry after use in hard water areas
- Get any chip repaired quickly
Wipe the bath dry after use where you can, and rinse away any product left on the surface.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further and makes resurfacing more work.
How we price bath re-enamelling
Prices start from £350. Prices are worked out job by job, from your pictures. The main factors are:
- How hard the colour is to match
- Whether we combine several jobs
- The size and number of damaged areas
- Whether old repairs or coatings need taking off
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send photos and we’ll give you the exact figure.
Send photos for a quote
We price nearly every job from photos. This is what to send:
- Where you are, by postcode
- A clear, close picture of the problem area
- Whether it’s been repaired or coated before
- Daylight if possible, and no flash reflection
Email us a picture of the damage and one of the entire item, with your SA63 postcode, and we will come back with a fixed quote.
Covering Clarbeston Road
Clarbeston Road is about 5 miles north-east of Haverfordwest, in Pembrokeshire. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Our repair technicians cover 223 places across Pembrokeshire.
All of SA63 is within our area, from the main roads to the quietest streets. Local streets include Market Place, Orton Park and Dungleddy Court, and we cover them all. Other places close to Clarbeston Road include Wiston (2 miles south), Spittal (3 miles north-west), Golden Hill (3 miles north-west), Crundale (3 miles south-west) and Withybush (4 miles west). Within a short drive, we also cover Haverfordwest (5 miles south-west), Milford Haven (11 miles south-west), Pembroke (12 miles south), Pembroke Dock (11 miles south), The Marsh (5 miles south-west) and Dinbych-y-Pysgod (14 miles south-east).
What’s near Clarbeston Road
Typical jobs here are in homes near Cross Inn, among other places. Clarbeston Road has its own railway station: Clarbeston Road station. Further afield, we also cover the area around Rudbaxton Rath (2.3 miles south-west) and Withybush General Hospital (4.5 miles south-west). Open spaces near Clarbeston Road include Wiston Castle and Slebech Park Lake.
Signs you need bath re-enamelling in Clarbeston Road
The gloss on enamel is thin, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.
Common reasons people in Clarbeston Road contact us include:
- A bath that stays dull however much you clean it
- Brown or grey marks that do not clean off
- A peeling or bubbling previous coating
- An outdated colour you’d like to change
Questions to ask before you book
- How your room will be protected
- Whether they match the colour on site
- The length of the guarantee and what it covers
- How to look after the finish
Towns and villages near Clarbeston Road
Also in Clarbeston Road
What we cannot put right
In fairness, there are a few things a repair won’t fix:
- A metal bath with a through crack
- Leaks from fittings rather than the bath
- An acrylic bath that flexes badly underfoot
Send us pictures and we will tell you honestly.
Materials we work on in Clarbeston Road
- Acrylic baths
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
DIY repairs versus a professional job
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
Work for landlords and builders
We are used to working with agents and managing companies. Just send pictures, the address and how to get access and we’ll arrange it.
Builders use us to fix snagging damage before handover. Several plots can be done in one visit.
Repair or replace: which is better?
A refit takes several trades and several days. Resurfacing is one technician, normally in a day, with the bath ready the next day. Prices start from £350. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send pictures and you’ll get a fixed figure.
Why us?
- Fixed prices from your photos
- We come to you, anywhere in the UK
- One-year guarantee on every repair
- Nothing taken out or refitted
Take a look at our pricing and guide to resurfacing and replacement costs.
What happens on the day
On the day itself, there is little for you to do. Show us the job, point us to the room, and we’ll get on with it. Most visits take the best part of a day.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
How to prepare
- Have a window or extractor fan available
- Plan for the room to be out of bounds to pets and children
- Tell us about any previous repairs or coatings
Get a quote
We price from pictures so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
