Pembrokeshire · Wales
Bath re-enamelling & resurfacing in Penffordd, Pembrokeshire
Full bath re-enamelling and resurfacing in Penffordd, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Staining under the taps and around the waste
- A bath in a colour that no longer suits
Bath re-enamelling in Penffordd without replacing anything
Re-enamelling works especially well on cast iron and steel, and we can resurface acrylic baths as well. You end up with a smooth, glossy surface. Typical jobs include chips and rust in more than one place and a coating lifting around the plughole, in basins & shower trays, Victorian roll-tops and acrylic baths.
All of our repairs are guaranteed for twelve months in Penffordd and everywhere else. We return to put right any problem with the work.
- Where
- Penffordd (SA66)
- County
- Pembrokeshire
- Warranty
- A year, on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Where we work around Penffordd
Penffordd is about 9 miles north-east of Haverfordwest, in Pembrokeshire. Across the SA66 area, we carry out the work at your property. Penffordd is one of 223 places in Pembrokeshire where we work.
All of SA66 is within our area, from the main roads to the quietest streets. We regularly work on streets such as Tre-Gendeg Road and Feidr-ist and the roads around them. If you are just outside Penffordd, we cover Llanycefn (1 mile north-east), Gelli (2 miles south), Llandissilio West (2 miles east), Llandissilio (3 miles east) and Llawhaden (3 miles south). Within a short drive, we also cover Haverfordwest (9 miles south-west), Milford Haven (15 miles south-west), Pembroke (14 miles south), Pembroke Dock (14 miles south-west), The Marsh (9 miles south-west) and Dinbych-y-Pysgod (14 miles south).
Landmarks near Penffordd
Around Penffordd, we work in homes near Church Of Saint Mary, among other places. The closest station to Penffordd is Clunderwen station, roughly 3.2 miles south-east of the centre. Other landmarks nearby include Llandre Entrenchment (1.6 miles south-east). Open spaces near Penffordd include Broadway Hill.
When a repair isn’t the answer
We will always be straight with you, so here’s what a repair won’t do:
- Plumbing leaks, which need a plumber
- A metal bath with a through crack
- Problems we cannot see until an old finish comes off
Not sure? Send photos and we will give you a straight answer.
Surfaces we repair
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
Penffordd questions
Can you change the colour of my bath?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
How quickly can you book me in?
Your quote comes with available dates. Tell us if you need it done quickly.
How do I get a price for bath re-enamelling in Penffordd?
Resurfacing from £350. We give a fixed price from your pictures. Send a close-up of the damage and a wider photo with your SA66 postcode.
Will there be a smell?
Some materials have a smell while they’re applied. It fades as everything cures.
What happens if you find more damage?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
It’s been repaired before. Can you still fix it?
In most cases. The old repair comes out first, so mention it when you send photos.
Can tenants book a repair?
We’re happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
Can you do the outside of a roll-top?
Yes. Inside and out if you’d like.
Looking after it afterwards
Good habits make a big difference to how long a repair lasts:
- A quick wipe after use keeps limescale away
- Do not leave a chip unrepaired
- Respect the curing time we give you
- Stick to gentle, non-abrasive cleaners
Dry the bath after use if possible, especially in hard water areas, and rinse away any product left on the surface.
Do not try to scrub a worn bath back to shine. It just wears the enamel further and makes resurfacing more work.
What your bath is made of matters
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
What we do, step by step
On the day itself, there’s little for you to do. Show us the job, point us to the room, and we’ll take it from there. Most visits take the best part of a day, including clearing up.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Plan for the room to be out of bounds to pets and children
- Mention any earlier repairs or resurfacing
- Let the surface dry out before the visit
How to get a price
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed price.
Read more
Work for landlords and builders
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We will fit around changeovers where we can.
We’re used to working with agents and managing companies. Send the address, photos and access details and we’ll arrange it.
Prices and what affects them
Resurfacing from £350. We price every job individually, from your pictures. What matters most is:
- Whether it’s a chip, crack, burn or wear
- How many areas need work
- Previous DIY repairs that have to come out
- Unusual colours or finishes
We charge the same wherever you are, with no extra for Penffordd. The job itself decides the price: the material, the amount of damage and how many items.
Quotes from your photos
We price nearly every job from photos. This is what to send:
- Natural light rather than flash
- Where you are, by postcode
- A clear, close picture of the problem area
- Any earlier repairs or coatings
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
Should you replace it?
A refit takes several trades and several days. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Resurfacing from £350, with every job priced individually. A repair normally costs much less than people expect, particularly next to the cost of replacement. Send photos and we will give you the exact figure.
What you get with us
- Free fixed quotes from pictures
- Every repair guaranteed for a year
- One visit for most repairs
- No need to remove anything
See our prices page and resurfacing vs replacement cost guide.
Nearby places to Penffordd
More services for Penffordd
DIY kit or professional repair?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
About our accreditations · Every repair comes with a one-year guarantee.
