Lancashire · England
Bath re-enamelling & resurfacing in Claughton, Lancashire
We travel to Claughton for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- Lots of chips and rust spots
- A peeling or bubbling previous coating
Should I try a DIY kit first?
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
How we handle bath re-enamelling in Claughton
Many of the baths we re-enamel are period roll-tops, which are heavy, hard to move and costly to replace. Doing them in place keeps an original feature. Common call-outs are for a bath that stays dull however much you clean it and stains that won’t shift, in acrylic baths, cast iron baths and Victorian roll-tops.
Your repair is guaranteed for a year, as with every job we do.
- Where
- Claughton (LA2)
- County
- Lancashire
- Guarantee
- 12 months on all our work
- Quotes
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Where we work around Claughton
Claughton is about 6 miles north-east of Lancaster, in Lancashire. Jobs in Claughton are booked in like any other job: a fixed quote from pictures, and a technician at your door on the day. We cover all 482 towns and villages in Lancashire, from the larger towns to small villages. You can also see our page for Manchester, about 46 miles away.
Jobs in LA2 work the same way as everywhere else we cover. We also cover the places around Claughton: Farleton (1 mile north-east), Aughton (1 mile north-west), Caton Green (1 mile south-west), Hornby (2 miles north-east) and Gressingham (2 miles north). Larger places within reach include Lancaster (6 miles south-west), Morecambe (8 miles west), Heysham (10 miles west), Garstang (14 miles south), Westfield War Memorial Village (7 miles south-west) and Sandylands (9 miles west).
Local landmarks in Claughton
Our clients here include homes close to The Fenwick Steak & Seafood Pub and St Chad's Church and the streets around them. The nearest railway station is Wennington station, about 3.8 miles north-east. Further afield, we also cover the area around Hornby Castle (1.8 miles north-east) and Lancaster Moor Hospital (5.3 miles south-west). For a walk, there is Grit Fell.
Work for landlords and builders
Housing associations and facilities teams use us for planned and reactive repairs in Lancashire and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
What affects the price in Claughton
Resurfacing from £350. We don’t charge extra for travel to Claughton. The price comes down to:
- How many items we do on one visit
- Previous DIY repairs that have to come out
- The size and number of damaged areas
- The type of damage
No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Send pictures for a quote
The better the photos, the more accurate the price. Here’s what helps:
- Any details about the material
- Your postcode, so we can check dates
- A coin or ruler next to the damage for scale
- A clear, close picture of the problem area
There’s no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.
Places near Claughton
Other services in Claughton
Keeping it looking good
Nothing complicated is needed:
- Rinse off hair dye, oils and bath bombs immediately
- Do not leave a chip unrepaired
- Avoid suction-cup mats
- Leave the bath for the full curing time before using it
Use mild, non-abrasive cleaners, don’t use suction bath mats, and don’t leave bottles or razors standing on the surface.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further.
Questions from Claughton
It’s been repaired before. Can you still fix it?
Generally, yes. Let us know what was used before.
Will there be a smell?
Expect a mild smell while we’re working that clears as it cures.
Can you re-enamel a roll-top bath?
Yes. We can do the inside and outside.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Do you work for landlords and businesses?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses in Claughton.
Can I get a quote without a visit?
Usually, yes. Clear pictures let us give you a fixed quote without visiting.
How long will the bath be out of use?
Usually a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
Do you come to Claughton?
Yes. We work across the UK and come to Claughton and the rest of Lancashire. Send us photos for a fixed quote, or call 0345 017 0787.
What we do, step by step
Visits start with a quick look at the job together, so there are no surprises. Then the area is sheeted and masked and the work begins. Allow most of the day.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Mention if the room is upstairs or in a flat
- Have somewhere for us to park nearby if possible
- Mention any parking restrictions or tricky access
How to get a price
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
Related advice
Different materials, different repairs
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is the part we put right.
Repair or replace: which is better?
A new bath means a plumber, removing a heavy bath, re-tiling or making good the walls and days without a bathroom. Re-enamelling gives the bath a new finish with the bath left where it is. Our bath re-enamelling starts from £350. A repair typically costs much less than people expect, particularly next to the cost of replacement. Send photos and we will give you the exact figure.
Why book with us
- Repair technicians who travel to you, UK-wide
- A year’s guarantee on all work
- Most jobs done in one visit
- Colour-matched on site
Take a look at our prices page and guide to resurfacing and replacement costs.
Do you need bath re-enamelling in Claughton?
Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
Clients typically contact us about:
- An outdated colour you’d like to change
- A coating lifting around the plughole
- A dull, rough surface that will not come clean
- A roll-top that’s seen better days
Comparing quotes
- How the room is protected while they work
- Whether they match the colour on site
- A fixed price, and whether VAT is included
- What aftercare is recommended
About our accreditations · Every repair comes with a one-year guarantee.
