Warwickshire · England
Bath re-enamelling & resurfacing in Claverdon, Warwickshire
Problem with your bath in Claverdon? We put it right where it is, match it on site and guarantee the work for a year.
- Resurfacing from £350
- A roll-top that is seen better days
- Chips and rust in more than one place
About our bath re-enamelling in Claverdon
The bath stays where it is, so the taps, tiles and plumbing aren’t touched. Most baths are done in one visit, with the bath ready to use the following day. If you are dealing with a bath that stays dull however much you clean it and a coloured bath you want in white, we can normally put it right, on pressed steel baths, Victorian roll-tops and acrylic baths alike.
The work is covered for a year after we finish. If anything isn’t right, ring us and we will sort it.
- Where
- Claverdon (CV35)
- Region
- Warwickshire
- Cover
- A year, on every repair
- Quotes
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Should you replace it?
Getting a cast iron bath out is hard work: they’re heavy, often need breaking up, and a new one is not cheap. Re-enamelling avoids all of it. Resurfacing from £350, with every job priced individually. Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
Why book with us
- Honest advice, even when it means no job
- Free fixed quotes from pictures
- No need to remove anything
- One price list for the whole UK
See our full price list and guide to resurfacing and replacement costs.
Landlords, agents and businesses in Claverdon
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which is easier on the people living there.
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Places near Claverdon
Also in Claverdon
Do you need bath re-enamelling in Claverdon?
Once enamel loses its gloss, it stains more easily, and scrubbing it wears it down further. That is the point where re-enamelling makes sense.
The most common problems we are called about are:
- Wear marks under the taps
- A roll-top that’s seen better days
- A bath in a colour that no longer suits
- Staining under the taps and around the waste
Questions to ask before booking
- How long it needs to cure
- What happens if they find more damage
- What preparation is included
- Whether a trained technician does the job
Honest limits
A repair is not always the answer, and we would rather say so up front. Repairs will not solve:
- Damage hidden under a previous coating, until it’s stripped back
- A bath split right through the body
- Steel that has corroded right through
Not sure? Send pictures and we will give you a straight answer before you book.
What we work on
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
Claverdon and the surrounding area
Claverdon is about 6 miles west of Warwick, in Warwickshire. Whether you are in the middle of Claverdon or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. We cover all 324 towns and villages across Warwickshire. Our nearest city page is Birmingham, about 15 miles away.
We cover every part of the CV35 postcode area and the streets around it. From Church Road, Station Road and Beaumont Close or anywhere nearby, a technician can come to you. Other places close to Claverdon include Lye Green (1 mile north), Tattle Bank (1 mile south-west), Barnmoor Green (1 mile west), Kington (1 mile south-west) and Preston Green (2 miles west). Larger places within reach include Warwick (6 miles east), Royal Leamington Spa (8 miles east), Stratford-upon-Avon (6 miles south), Leamington Spa (7 miles east), Kenilworth (7 miles north-east) and Fordbridge (14 miles north).
Local landmarks in Claverdon
In Claverdon, that means homes near Red Lion Public House, Church of St Michael and All Angels and Claverdon Primary School. The nearest railway station is Claverdon station, about 0.7 miles east of the centre. Nearby you will also find Fulbrook Castle (4.2 miles south-east) and St Michael's Hospital (5 miles east). For a walk, there’s Henley Sidings.
Common questions in Claverdon
Can you redo someone else’s repair?
Generally, yes. Tell us what was done before.
Do you cover the entire of Warwickshire?
The whole UK, including all of Warwickshire. Just include your postcode and we’ll offer you dates.
Do you need to take the bath out?
Not at all. Everything is done in your bathroom, with the room masked and ventilated.
Do you do work for letting agents?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Will you leave a mess?
We protect the room with dust sheets and masking first, and we clean up when we have finished.
How do I book?
Some photos, your postcode and how to reach you. On the day, we only need access to the room.
Do you resurface freestanding baths?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
How durable is a resurfaced bath?
It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.
Materials and what they mean for the repair
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. It must be solid and not flex underfoot.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
Keeping it looking good
So the finish stays in good condition:
- Never use suction bath mats
- Do not leave a chip unrepaired
- Wipe the bath dry after use in hard water areas
- Keep toiletries on a shelf rather than in the bath
The first few days matter most: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.
Do not try to scrub a worn bath back to shine. It just wears the enamel further and makes resurfacing more work.
DIY repairs versus a professional job
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
What we do, step by step
Once we are through the door, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the work takes a full day, and we finish by cleaning up and talking you through the result.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Plan for the room to be out of bounds to pets and children
- Mention if the room is upstairs or in a flat
- Open a window if you can
Getting a price
To get a price, send two or three pictures through our quote form or ring us. We will say straight away if a repair is the right fix.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
