Warwickshire · England
Bath re-enamelling & resurfacing in Kington, Warwickshire
Fixed-price bath re-enamelling in Kington and the surrounding area, usually in one visit and guaranteed for a year.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- Stains that won’t shift
Bath re-enamelling at your home in Kington
Most baths are re-enamelled in a day, and you can use the bath the day after. Nothing is disconnected or removed. We work on acrylic baths, cast iron baths and Victorian roll-tops, and common reasons people contact us are brown or grey marks that don’t clean off and a period or roll-top bath worth keeping.
The work is guaranteed for twelve months. If something isn’t right in that time, we come back and put it right.
- Area
- Kington (CV35)
- Area hub
- Warwickshire
- Cover
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Repairs by material
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Our work in Kington
Kington is about 6 miles north of Stratford-upon-Avon, in Warwickshire. From the centre of Kington to the outlying streets, the service is the same: a fixed price, a tidy visit and a guarantee. We work in 324 places across Warwickshire, from the larger towns to small villages. We work right across the region, from Kington to Birmingham (about 15 miles away).
Our visits in CV35 work the same way as everywhere else we cover. You’ll find streets such as Kington Lane and Kington Rise, and we cover them all. If you’re just outside Kington, we cover Tattle Bank (1 mile south-east), Barnmoor Green (1 mile north), Claverdon (1 mile north-east), Preston Green (1 mile north-west) and Lye Green (1 mile north-east). Within a short drive, we also cover Warwick (7 miles east), Royal Leamington Spa (9 miles east), Stratford-upon-Avon (6 miles south), Leamington Spa (8 miles east), Kenilworth (8 miles north-east) and Fordbridge (14 miles north).
Around Kington
Around Kington, we work in homes near Claverdon Primary School, Henley-in-Arden School and St Mary. Kington’s nearest station is Claverdon station, about 1.6 miles east. Other landmarks nearby include Stratford Hospital (5.6 miles south) and Aston Cantlow (3.8 miles south-west). For a walk, there’s Henley Sidings.
How we price bath re-enamelling
Resurfacing from £350. Every quote is fixed and free. What we take into account:
- Whether old repairs or coatings need taking off
- Whether we combine several jobs
- What kind of damage it is
- How easy the damage is to reach
The price depends on the type and amount of damage, the material and how many items we do on one visit. We give a fixed quote from your pictures, so you know the cost before booking.
How to get a fixed quote
Most quotes are done from pictures alone. To make it quick:
- A close-up of the damage, in focus
- A photo taken from further back
- Daylight if possible, and no flash reflection
- Your postcode, so we can check dates
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the whole bath, we can price the job the same day in most cases.
Common questions in Kington
Can a failed resurfacing be redone?
Yes. Removing the old finish takes extra time, which we include in the price.
Can tenants book a repair?
We’re happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
How quickly can you book me in?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
What do you need from me?
Some pictures, your postcode and how to reach you. On the day, access to the room.
Can you repair something that’s been repaired before?
Most of the time. Let us know what was used before.
Can I get a quote without a visit?
In nearly every case. We only ask to see it in person if the photos can’t show what we need.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Is repairing better than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we’ll tell you.
Keeping it looking good
Looking after the surface is easy:
- Avoid suction-cup mats
- Leave the bath for the full curing time before using it
- Fix dripping taps quickly
- Rinse off hair dye, oils and bath bombs right away
A quick rinse and wipe after use helps, especially in hard water areas, so limescale can’t build up.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
The process
On the day, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take most of the day. We tidy up before we leave and let you know when you can use it again.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- The bath is left to cure and can generally be used the day after.
Preparing for the visit
- Let us know if it has been repaired before
- Open a window if you can
- Keep a parking space free if you can
How to get a price
Getting a price is easy: take a close-up of the damage and a picture from further back, send them over with your postcode, and we’ll reply with a fixed price. Quotes are free and no obligation.
Advice
Honest limits
A repair isn’t always the answer, and we’d rather say so up front. Repairs won’t solve:
- Acrylic that moves when you stand in it
- Damage hidden under a previous coating, until it’s stripped back
- Leaking taps or wastes (a plumber’s job)
Not sure? Send photos and we’ll give you a straight answer before booking.
Materials we repair
- Pressed steel baths
- Acrylic baths
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
Also near Kington
Also in Kington
Work for landlords and builders
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.
DIY repairs versus a professional job
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
When to call us in Kington
The gloss on enamel is thin, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.
Signs it’s time to call us include:
- Brown or grey marks that don’t clean off
- A coating lifting around the plughole
- Wear marks under the taps
- Chips and rust in more than one place
Questions to ask before you book
- Whether the price is fixed and includes VAT
- How the colour is matched
- What happens if the damage is worse than the photos show
- How to care for the finish
About our accreditations · Every repair comes with a one-year guarantee.
