Dundee · Scotland
Bath re-enamelling & resurfacing in Claverhouse, Dundee
Bath re-enamelling across Claverhouse and nearby, done in a single visit in most cases.
- Resurfacing from £350
- Wear marks under the taps
- A coloured bath you want in white
Bath re-enamelling in Claverhouse without replacing anything
We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, so we don’t cut corners on it. Our repair technicians work on pressed steel baths, acrylic baths and cast iron baths, and common reasons people get in touch are chips and rust in more than one place and a period or roll-top bath worth keeping.
Every repair is covered by our one-year guarantee, wherever you are in Dundee.
- Area
- Claverhouse (DD3, DD4)
- County
- Dundee
- Cover
- A year, on every repair
- Price
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Different materials, different repairs
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s what we repair.
Our work in Claverhouse
Claverhouse is about 1 mile north of Dundee, in Dundee. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Claverhouse is one of 50 places in Dundee we cover. We work right across the region, from Claverhouse to Edinburgh (about 39 miles away).
We work across the DD3 and DD4 postcode area. From Newton Road, Emmock Road and Emmock Lane or anywhere nearby, we can come to you. If you’re just outside Claverhouse, we cover Mill of Mains (1 mile south-east), Woodside (1 mile south), Downfield (1 mile west), Balgowan (1 mile west) and Pitkerro (1 mile south-east). Within a short drive, we also cover Broughty Ferry (4 miles east), Monifieth (5 miles east), Blackness (3 miles south-west), Barnhill (4 miles east), Logie (3 miles south-west) and Balgay (3 miles south-west).
Around Claverhouse
Typical jobs here are in homes near Baxter Park, Scottish School of Contemporary Dance and St Roque's Library. Other local landmarks include Baldragon Academy (1 mile west) and Mains Parish Church (less than half a mile south-west). The nearest railway station is Dundee station, roughly 2.5 miles south of the centre. A little further out are McManus Gallery (2.1 miles south) and Wellgate Centre (2 miles south). Green spaces nearby include Trottick Mill Ponds and Balgay Hill.
What bath re-enamelling costs
Resurfacing from £350. We do not charge extra for travel to Claverhouse. The price comes down to:
- Access to the area
- How many items we do on one visit
- The material and finish
- How many areas need work
No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
Send pictures for a quote
We price nearly every job from pictures. This is what we need:
- What it’s made of, if you know
- One picture of the whole bath
- A coin beside the damage so we can judge size
- One sharp close-up of the damage
Pricing is simple: snap the damage close up and then the whole item, send them over with your postcode, and we’ll reply with a fixed quote. There’s no charge for the quote and no obligation.
How the visit works
Once we are through the door, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the job takes the best part of a day, depending on what we find, and we finish by cleaning up and talking you through the result.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Have somewhere for us to park nearby if possible
- Keep children and pets away from the room on the day
- Open a window if you can
Ask for a price
For a price in Claverhouse, the easiest route is pictures: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Read more
More services for Claverhouse
Looking after it afterwards
Aftercare is simple:
- Don’t let dyes or oils sit on the finish
- Don’t leave a chip unrepaired
- Repair dripping taps early
- Dry the bath after use to stop limescale
Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Resurfacing sooner means less repair work first.
Repair or replace in Claverhouse?
Replacing the bath means a plumber, removing a heavy bath, re-tiling or making good the walls and several days without a working bathroom. Resurfacing renews the entire surface without moving it. Our bath re-enamelling starts from £350. Compared with replacing, repairing usually costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Why us?
- Everything repaired in place
- Accredited with CHAS, Constructionline and SafeContractor
- Colour-matched on site
- No extra charge for your area
Take a look at our prices page and resurfacing vs replacement cost guide.
Landlords, agents and businesses in Claverhouse
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip.
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
What a repair can’t fix
We will always be straight with you, so here’s what a repair can’t fix:
- A metal bath with a through crack
- Anything hidden under an old coating, until we remove it
- Plumbing leaks, which need a plumber
Not sure? Send photos and we will give you a straight answer.
Materials we work on in Claverhouse
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
Should I try a DIY kit first?
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Questions from Claverhouse
Can you re-enamel a roll-top bath?
Yes, often. The inside is resurfaced, and we can refinish the outside as well.
Someone resurfaced my bath and it’s peeling. Can you help?
In most cases. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
Do you need to take the bath out?
No. We resurface it in place, so the tiles and taps stay put.
Can landlords book you?
We do, regularly. We can quote for several properties together and work between tenancies.
What information do you need?
A close-up, a wider photo and your postcode. Then we will agree a date.
How long is the bath unusable?
Most baths are done in a day, ready the day after. We’ll confirm timings when we quote.
Is it messy?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Do you work in Claverhouse?
We do. We send a technician to Claverhouse for every job, with no extra charge for travel.
About our accreditations · Every repair comes with a one-year guarantee.
