Cumbria · England
Bath Re-enamelling in Cleator Moor
Full bath re-enamelling and resurfacing in Cleator Moor, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Thin, worn enamel in places
- A peeling or bubbling previous coating
What we do, step by step
Here’s how a visit normally runs: we arrive at the agreed slot, protect everything around the work area, carry out the work and clear up. Allow most of the day. Before leaving, we tell you how long to leave it and what to avoid for the first few days.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Move bottles, mats and clutter away from the area
- Mention if the room is upstairs or in a flat
- Ensure the area is dry
Get a quote
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through.
Related advice
Bath re-enamelling in Cleator Moor without replacing anything
Most baths are re-enamelled in a day, with the bath ready to use the following day. Taps, tiles, panels and plumbing all stay in place. We’re often asked to fix a bath that stays dull however much you clean it and stains that won’t shift, in cast iron baths, Victorian roll-tops and basins & shower trays.
Your repair is guaranteed for a year, as with every job we do.
- Where
- Cleator Moor (CA25, CA23)
- Area hub
- Cumbria
- Cover
- One year on every repair
- Quotes
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Places near Cleator Moor
More services for Cleator Moor
Do you need bath re-enamelling in Cleator Moor?
Often the bath has just had decades of use, with nothing wrong except the surface. The body of the bath is normally perfectly sound.
If you can see any of these, send us a photo:
- A bath in a colour that no longer suits
- An original cast iron bath that needs restoring
- A dull, rough surface that won’t come clean
- Thin, worn enamel in places
What your quote should include
- Whether there are any call-out or travel charges
- The length of the guarantee and what it covers
- How to care for the finish
- How soon you can use it again
DIY kit or professional repair?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
When a repair isn’t the answer
Not everything can be repaired, and we’d rather say so up front. We cannot fix:
- A poorly supported acrylic bath, until it’s firmed up
- A cast iron or steel bath that is cracked right through
- Leaking taps or wastes (a plumber’s job)
If in doubt, send photos and we will say what we think before booking.
Materials we work on in Cleator Moor
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
Landlord and trade work in Cleator Moor
Hospitality businesses can’t afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
About Cleator Moor
Cleator Moor is about 3 miles south-east of Whitehaven, in Cumbria. Book a date that suits you, and we will give you an arrival time in advance, so you are not left waiting in all day. Cleator Moor is one of 438 places in Cumbria we cover.
Our repair technicians cover all of the CA25 and CA23 postcode area and the streets around it. That includes homes on Market Street, Market Square and High Street. Being close to the A5086 and B5294, Cleator Moor is easy for our repair technicians to reach. Nearby, we also work in Cleator (1 mile south), Moor Row (1 mile south-west), Rheda Park (1 mile north), Galemire (1 mile west) and Keekle (1 mile north-west). Further out, we also cover Workington (8 miles north), Whitehaven (3 miles north-west), Maryport (13 miles north), Cockermouth (12 miles north-east), Moorclose (8 miles north) and Bransty (4 miles north-west).
Around Cleator Moor
Our customers here include homes close to Church of St John Evangelist, Montreal CofE Primary School and The Whitehaven Academy. For rail, the closest station is Corkickle station, about 3 miles north-west of the centre. Further afield, we also cover the area around West Cumberland Hospital (2 miles west) and Caernarvon Castle (4.8 miles south). The countryside around Cleator Moor includes Clints Quarry.
Materials and what they mean for the repair
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is the part we put right.
Should you replace it?
Getting a cast iron bath out is hard work: they’re heavy, often need breaking up, and a new one is not cheap. Resurfacing in place avoids that entirely. Our bath re-enamelling starts from £350. Our prices are the same across the UK, with no extra for Cleator Moor. The job itself decides the price: the material, the amount of damage and how many items.
Why Cleator Moor customers choose us
- One price list for the whole UK
- Nothing taken out or refitted
- Most jobs done in one visit
- Dust sheets down, tidy finish
See our full price list and guide to resurfacing and replacement costs.
Prices and what affects them
Resurfacing from £350. Prices are worked out job by job. What matters most is:
- Any earlier repairs that need removing first
- How much damage there is
- What kind of damage it is
- How many items we do on one visit
What it costs depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. We give a fixed price from your photos, so you know the cost before you book.
Quotes from your pictures
Photographing the damage takes a minute. Please include:
- What it’s made of, if you know
- A close-up of the damage, in focus
- Whether it’s been repaired or coated before
- Good light, ideally daylight, without flash glare
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job.
Cleator Moor questions
Is my repair covered?
Every repair comes with our one-year guarantee. We will explain what it covers when we quote.
How durable is a resurfaced bath?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
What does bath re-enamelling cost?
Resurfacing from £350. Every job gets a fixed quote from your pictures. Send a close-up of the damage and a wider photo with your CA25 postcode.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Does re-enamelling smell?
A little, during the work. We set up ventilation and the smell fades as it cures.
Do I need to be at home?
We need someone to let us in. You do not need to watch us work.
Will there be a smell?
There may be a mild smell during the work, which fades afterwards.
Is it safe with children and pets around?
Keep pets and children away from the work area on the day, so the repair is not disturbed while it cures.
About our accreditations · Every repair comes with a one-year guarantee.
