Cumbria · England
Bath Re-enamelling in Rheda Park
Fixed-price bath re-enamelling in Rheda Park and the surrounding area, normally in one visit.
- Resurfacing from £350
- Thin, worn enamel in places
- Several chips and rust patches
Bath re-enamelling in Rheda Park without replacing anything
Resurfacing renews the whole surface of the bath without taking anything out. It suits baths that are dull, stained, rough or chipped all over. Our technicians work on cast iron baths, Victorian roll-tops and pressed steel baths, and the jobs we see most are an outdated colour you’d like to change and a dull, rough surface that won’t come clean.
All of our repairs are guaranteed for twelve months. We return to put right any problem with the work.
- Location
- Rheda Park (CA26)
- Area hub
- Cumbria
- Warranty
- One year on every repair
- Price
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Rheda Park and nearby
Rheda Park is about 3 miles east of Whitehaven, in Cumbria. Wherever you are in the CA26 postcode area, we carry out the work at your property. Rheda Park is one of 438 places in Cumbria where we work.
We cover every part of CA26. We regularly work on streets such as North Park, Elm Mount and Meadow View and the roads around them. Other places close to Rheda Park include Cleator Moor (1 mile south), Keekle (1 mile west), Galemire (2 miles south-west), Cleator (2 miles south) and Moor Row (2 miles south-west). Larger places within reach include Workington (7 miles north), Whitehaven (3 miles west), Maryport (12 miles north), Cockermouth (10 miles north-east), Moorclose (7 miles north) and Bransty (4 miles west).
Landmarks near Rheda Park
Typical jobs here are in homes near St Paul's Church, Frizington Community Primary School and The Whitehaven Academy, among other places. The nearest railway station is Corkickle station, roughly 3.1 miles west. Nearby you’ll also find Hayes Castle (4 miles north-west) and The Rum Story (3.5 miles west). Open spaces near Rheda Park include Knock Murton and Clints Quarry.
What bath re-enamelling costs
Resurfacing from £350. We don’t charge extra for travel to Rheda Park. The price depends on:
- Where the damage is and how we get to it
- Previous DIY repairs that have to come out
- Whether it’s a chip, crack, burn or wear
- The size and number of damaged areas
Instead of hourly rates, we price the whole job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
Quotes from your pictures
Almost every job we do is priced from pictures. This is what we need:
- One sharp close-up of the damage
- The material, if you know it
- Natural light rather than flash
- Whether it’s been repaired or coated before
To get a price, send two or three pictures using our quote form or ring us. We will tell you honestly if a repair is the right fix.
Towns and villages near Rheda Park
Also in Rheda Park
What happens on the day
On the day itself, there’s little for you to do. Let us in and show us the room, and we’ll take it from there. Most visits take most of the day, tidy-up included.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the following day.
Getting ready for the visit
- Clear the area around the damage
- Let us know about parking or access
- Mention if the room is upstairs or in a flat
Ask for a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed price.
Read more
What we are called out for in Rheda Park
Older baths frequently have several problems at once: dull areas, chips, rust and staining. Resurfacing sorts them out together.
Look out for any of the following:
- Worn patches where water runs and sits
- Lots of chips and rust spots
- Enamel that is lost its shine and feels rough
- A period or roll-top bath worth keeping
What your quote should include
- What prep work is covered
- What the guarantee covers, and for how long
- How to look after the finish
- Who will actually do the work
Should I try a DIY kit first?
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and don’t use it until it has fully cured. If it fails, we can still put it right.
Honest limits
Honesty matters more than a booking, so here’s what a repair can’t fix:
- Anything hidden under an old coating, until we remove it
- Acrylic that moves when you stand in it
- A metal bath with a through crack
Not sure? Send pictures and we’ll give you a straight answer before booking.
Surfaces we repair
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
Why repair rather than replace?
Replacement only makes sense in a few cases: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing normally wins. Resurfacing from £350, with every job priced individually. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
What you get with us
- CHAS and Constructionline accredited
- One visit for most repairs
- Colour mixed on the day to match
- Technicians who travel to you, UK-wide
See our full price list and guide to resurfacing and replacement costs.
Different materials, different repairs
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel often rusts by the plughole, so we pay close attention there.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Keeping it looking good
Looking after the surface is easy, and it makes a real difference:
- A dripping tap should be fixed promptly
- Do not use the bath until it has fully cured
- Don’t leave a chip unrepaired
- Never use suction bath mats
Rinse the bath and wipe it over after use, especially in hard water areas, to stop limescale building up.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Resurfacing sooner means less repair work first.
Common questions in Rheda Park
How long is the bath unusable?
Most baths are done in a day, ready the day after. We will confirm timings when we quote.
How durable is a resurfaced bath?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Will there be a smell?
There may be a mild smell during the work.
Can you make a coloured bath white?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
I’m a tenant. Can you help?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
Do you work for landlords and businesses?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses.
Will the price change on the day?
The price is fixed for what the pictures show. If there’s more, we’ll tell you before starting.
Do you charge for travel?
We don’t add a call-out fee. Your fixed quote includes everything.
About our accreditations · Every repair comes with a one-year guarantee.
