Medway · England
Bath Re-enamelling for Cliffe Woods homes
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Cliffe Woods. Send pictures for a free, fixed quote.
- Resurfacing from £350
- A coating lifting around the plughole
- Lots of chips and rust spots
Looking after it afterwards
To keep it looking its best for years:
- Get any chip repaired quickly
- Don’t use the bath until it has fully cured
- Clean with a soft cloth and mild detergent
- Wipe the bath dry after use in hard water areas
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and do not leave bottles or razors standing on the surface.
If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so have it stripped and resurfaced.
About our bath re-enamelling in Cliffe Woods
Resurfacing renews the whole surface of the bath without a refit. It’s the answer when the entire bath is tired rather than one spot. Typical jobs include thin, worn enamel in places and chips and rust in more than one place, across cast iron baths, acrylic baths and basins & shower trays.
All of our repairs are guaranteed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.
- Location
- Cliffe Woods (ME3)
- Area hub
- Medway
- Warranty
- 12 months on all our work
- Price
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
DIY kit or professional repair?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Covering Cliffe Woods
Cliffe Woods is about 3 miles north of Rochester, in Medway. We travel to customers in Cliffe Woods and the surrounding area, so there’s no workshop to go to. Cliffe Woods is one of 68 places in Medway we cover. Our jobs stretch from Cliffe Woods to London (about 26 miles away).
All of ME3 is covered, from the main roads to the quietest streets. That includes homes on Cardens Road, View Road and Brewer Road. Close by, we cover Mockbeggar (1 mile south-west), Church Street (1 mile west), Lower Higham (2 miles west), Cliffe (2 miles north) and Higham (2 miles south-west). Larger places within reach include Gillingham (5 miles south-east), Chatham (5 miles south), Rochester (3 miles south), Rainham (7 miles south-east), Strood (3 miles south) and Luton (5 miles south).
Local landmarks in Cliffe Woods
In Cliffe Woods, that means homes near The Hundred of Hoo Academy and Cliffe Woods Primary School. Cliffe Woods’s nearest station is Higham station, about 1.5 miles west. Further afield, we also cover the area around French Hospital (3.1 miles south) and City of Rochester-upon-Medway (2.8 miles south). Open spaces near Cliffe Woods include Gad's Hill and Rede Common.
Should you replace it?
There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. In most other cases, resurfacing is the better choice. Prices start from £350. No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Why us?
- We come to you, anywhere in the UK
- CHAS and Constructionline accredited
- Fixed prices from your photos
- Colours mixed by hand to suit your surface
Take a look at our prices page and bath cost comparison.
Work for landlords and builders
Landlords, letting agents and housing providers in Cliffe Woods use us as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Letting agents often send us pictures straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Cliffe Woods: your questions answered
When can you do it?
It depends on the time of year and where you are. Send photos with your postcode and we will reply with the earliest dates.
Does the bath have to be removed?
No, it stays where it is. Everything is done in your bathroom, with the room protected and ventilated.
Can I get a quote without a visit?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
Is repairing better than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.
What areas do you cover?
We work UK-wide, and that includes Cliffe Woods. Our prices are the same everywhere.
Will there be fumes?
A little, during the work. We set up ventilation and the smell fades as it cures.
What does bath re-enamelling cost?
Prices start from £350. We give a fixed quote based on photos of the damage. Send a close-up and a picture of the entire item with your ME3 postcode.
Are there extra charges for Cliffe Woods?
There is no separate call-out charge. Your fixed quote includes everything.
How it works
It’s a tidy, low-fuss visit. We agree the arrival time in advance, protect the area, and get on with the job, which normally takes most of the day. If we find something your pictures didn’t show, we will explain it before carrying on.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- The bath is left to cure and can usually be used the day after.
How to prepare
- Let the surface dry out before the visit
- Make sure the room can be ventilated
- Let us know about parking or access
Get a quote
You do not need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed price.
Related advice
Different materials, different repairs
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Steel often rusts by the plughole, so we pay close attention there.
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
What affects the price in Cliffe Woods
Resurfacing from £350. A fixed quote means you know the cost before booking. We take into account:
- Previous DIY repairs that have to come out
- Access to the area
- The size and number of damaged areas
- The type of damage
Set against the cost of replacement, a repair is generally a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Send pictures for a quote
When you take your pictures, a few simple things make all the difference:
- Something in shot to show the size
- Your postcode, so we can check dates
- Whether it’s been repaired or coated before
- Daylight if possible, and no flash reflection
Getting a price is easy: take a close-up of the damage and a picture from further back, send them over with your postcode, and you’ll get a fixed quote back. Quotes are free and no obligation.
Places near Cliffe Woods
More services for Cliffe Woods
What we are called out for in Cliffe Woods
Hard water speeds up the wear, and abrasive cleaners do the most damage.
Keep an eye out for these signs:
- Wear marks under the taps
- Staining under the taps and around the waste
- A roll-top that is seen better days
- A bath that stays dull however much you clean it
What your quote should include
- Whether the price is fixed and includes VAT
- What aftercare is recommended
- Whether a trained technician does the job
- What protection goes down before work starts
About our accreditations · Every repair comes with a one-year guarantee.
