South Lanarkshire · Scotland
Bath Re-enamelling for Climpy homes
Full bath re-enamelling and resurfacing in Climpy, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- An outdated colour you’d like to change
- Wear marks under the taps
What affects the price in Climpy
Prices start from £350. Quotes are free and the price is fixed. What we take into account:
- The colour and finish to match
- Whether it’s a chip, crack, burn or wear
- Whether we combine several jobs
- The size and number of damaged areas
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
Getting a price from pictures
Good pictures mean an accurate price. Here’s what we find most useful:
- Any earlier repairs or coatings
- Any details about the material
- Your postcode, so we can check dates
- One picture of the whole bath
We price from photos so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Bath re-enamelling in Climpy, done in place
After cleaning, repairing and priming, we spray on the new finish. Most of the work, and most of the durability, is in the preparation, and we take our time over it. Our repair technicians work on cast iron baths, pressed steel baths and basins & shower trays, and common reasons people contact us are a bath that stays dull however much you clean it and an outdated colour you’d like to change.
Every job is backed for twelve months in Climpy and everywhere else. We return to put right any problem with the work.
- Location
- Climpy (ML11)
- County
- South Lanarkshire
- Guarantee
- One year on every repair
- Quote
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
DIY kit or professional repair?
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Do you need bath re-enamelling in Climpy?
Often the bath has just had decades of use, and only the surface is worn. Underneath, a cast iron or steel bath is typically as strong as ever.
Send us a picture if you notice any of these:
- A coating lifting around the plughole
- Stains that will not shift
- An original cast iron bath that needs restoring
- Several chips and rust patches
Comparing quotes
- Whether the colour is mixed to match
- Whether the price covers travel
- Whether the price is fixed and includes VAT
- How changes to the job are handled
Climpy and nearby
Climpy is about 6 miles north-east of Carluke, in South Lanarkshire. Our technicians come to homes and businesses in Climpy, so there is no workshop to go to. Climpy is one of 139 towns and villages in South Lanarkshire where we work. You can also see our page for Glasgow, about 23 miles away.
Our visits in ML11 work the same way as everywhere else we cover. We also cover the places around Climpy: Greenwall (1 mile south-east), Forth (1 mile south-east), Wilsontown (1 mile east), Haywood (3 miles east) and Braehead (3 miles south-east). We also work in nearby towns such as Hamilton (14 miles west), Uddingston (15 miles west), Blantyre (15 miles west), Larkhall (11 miles west), Carluke (6 miles south-west) and Lanark (8 miles south).
Landmarks near Climpy
The nearest railway station is Fauldhouse station, about 3 miles north of the centre. Other landmarks nearby include Law Hospital (6 miles west).
The process
Arrival times are agreed in advance, so you’re not left guessing. Once we are there, the work takes the best part of a day for most jobs. We leave the room clean and ready to use once it has cured.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can usually be used the following day.
Preparing for the visit
- Let us know which floor the room is on
- Mention any parking restrictions or tricky access
- Plan for the room to be out of bounds to pets and children
Ask for a price
Email us a photo of the damage and one of the whole item, with your ML11 postcode, and we’ll reply with a fixed price.
Read more
Repairs by material
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is what we repair.
For landlords and businesses
Housing associations and facilities teams use us for planned and reactive repairs in South Lanarkshire and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
When we’d advise against a repair
Honesty matters more than a booking, so here’s what a repair will not do:
- A cast iron or steel bath that is cracked right through
- Steel that has corroded right through
- Plumbing leaks, which need a plumber
If in doubt, send photos and we will say what we think.
Surfaces we repair
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Cast iron baths
Towns and villages near Climpy
More services for Climpy
Repairing versus replacing in Climpy
Replacing a bath can take several days across several trades. Re-enamelling is one technician, usually one day, with the bath back in use the next day. Resurfacing from £350, with every job priced individually. What it costs depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. You get a fixed quote from your pictures, so there are no surprises on the day.
Why us?
- A fixed quote before booking
- Colours mixed by hand to suit your surface
- Everything repaired in place
- Straight answers about what a repair can do
Read our full price list or bath cost comparison.
Common questions in Climpy
How long will the bath be out of use?
Normally one day, with the bath ready the following day. A badly pitted bath can need a second day.
Does re-enamelling smell?
There is some smell while the coating is applied, so we ventilate the room. It fades as the coating cures.
Do the materials smell?
Some materials have a smell while they’re applied. It clears as the materials cure.
What information do you need?
Some photos, your postcode and how to reach you. On the day, access to the room.
Can you price it without visiting?
In nearly every case. If pictures do not show enough, we will ask for another angle.
Can you change the colour of my bath?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
What does bath re-enamelling cost?
Resurfacing from £350. We give a fixed price based on photos of the damage. Send a close-up and a photo of the whole item with your ML11 postcode.
What happens once I’ve sent photos?
We come back with a fixed price. You are under no obligation.
About our accreditations · Every repair comes with a one-year guarantee.
