South Lanarkshire · Scotland
Bath Re-enamelling in Wilsontown
Full bath re-enamelling and resurfacing for homes and businesses in Wilsontown and across South Lanarkshire. Free, fixed quotes from your pictures.
- Resurfacing from £350
- A coating lifting around the plughole
- A roll-top that’s seen better days
Common questions in Wilsontown
Do you cover the whole of South Lanarkshire?
All of South Lanarkshire, and the rest of the UK. There’s no extra charge for travel.
Can I add another job to the visit?
Of course, and it normally saves money. Send pictures of everything together and you will get one combined price.
Do you work for landlords and businesses?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses.
What happens after I send photos?
You’ll get a fixed quote back, generally with dates to choose from. There is no obligation to book.
Is repairing better than replacing?
Normally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.
Is it messy?
No. The work area is masked and covered, and we take our waste away with us.
Can pets and children be at home?
Please keep children and pets out of the room during the visit. Everywhere else in the home is fine.
Can I get a quote without a visit?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
How we handle bath re-enamelling in Wilsontown
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, after the bath has been cleaned, repaired and keyed. Common call-outs are for a bath that stays dull however much you clean it and a peeling or bubbling previous coating, across Victorian roll-tops, cast iron baths and acrylic baths.
Peace of mind is built in: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.
- Where
- Wilsontown (ML11)
- Area hub
- South Lanarkshire
- Cover
- 12 months on all our work
- Quotes
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Wilsontown and nearby
Wilsontown is about 7 miles north-east of Carluke, in South Lanarkshire. Book a date that suits you, and we’ll give you an arrival time in advance, so you are not left waiting in all day. Wilsontown is one of 139 towns and villages in South Lanarkshire where we work. Our nearest city page is Edinburgh, about 22 miles away.
Jobs in ML11 work the same way as everywhere else we cover. Nearby, we also work in Forth (1 mile south-west), Haywood (1 mile east), Greenwall (1 mile west), Climpy (1 mile west) and Braehead (2 miles south). Larger places within reach include Hamilton (15 miles west), Larkhall (12 miles west), Carluke (7 miles south-west), Lanark (8 miles south-west), Viewpark (15 miles west) and Neilsland (15 miles west).
Landmarks near Wilsontown
Our customers here include homes close to Forth, among other places. The closest station to Wilsontown is Breich station, roughly 3.7 miles north. Further afield, we also cover the area around Couthally Castle (4.2 miles south). The countryside around Wilsontown includes Corse Law.
How to look after the repair
Most damage we see is avoidable. A few tips:
- Store bottles off the bath
- Stick to gentle, non-abrasive cleaners
- A quick wipe after use keeps limescale away
- Wash away dyes and oils after use
Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.
Leave a peeling coating alone. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
Prices and what affects them
Resurfacing from £350. There is no area surcharge for Wilsontown. The price reflects:
- Whether we combine several jobs
- How much damage there is
- Whether it’s a chip, crack, burn or wear
- What the surface is made of
Compared with replacing, a repair is usually a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
Send photos for a quote
Before you send pictures, these tips help us give you a firm price:
- The material, if you know it
- A close-up of the damage, in focus
- One picture of the entire bath
- Good light, ideally daylight, without flash glare
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed price the same day in most cases.
How the visit works
We begin by going over the job with you, so there are no surprises. Then the area is sheeted and masked and the work begins. You can expect it to take most of the day.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
How to prepare
- Mention any earlier repairs or resurfacing
- Avoid using the area for a few hours before we arrive
- Keep children and pets away from the room on the day
Ask for a price
Email us a photo of the damage and a wider shot of the whole item, and tell us you’re in Wilsontown, and we will come back with a fixed quote.
Advice
Honest limits
We’d rather lose a job than do one that will not last, so these are the limits:
- Damage hidden under a previous coating, until it’s stripped back
- A bath that is rusted through
- Leaks from fittings rather than the bath
If in doubt, send photos and we’ll say what we think before booking.
Surfaces we repair
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
- Acrylic baths
What your bath is made of matters
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Work for landlords and builders
We carry out planned and one-off repairs for housing associations and facilities teams in South Lanarkshire and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We will fit around changeovers where we can.
More services for Wilsontown
Repair or replace in Wilsontown?
A replacement frequently means several trades over several days. Resurfacing takes one technician and normally a day, and the bath is usable the day after. Our bath re-enamelling starts from £350. Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access.
Why Wilsontown clients choose us
- Straight answers about what a repair can do
- No need to remove anything
- Normally one visit, start to finish
- Same prices wherever you are
See our pricing or guide to resurfacing and replacement costs.
Do you need bath re-enamelling in Wilsontown?
Many baths we resurface have simply been well used. Underneath, a cast iron or steel bath is typically as strong as ever.
Signs it’s time to call us include:
- Enamel that’s lost its shine and feels rough
- An outdated colour you’d like to change
- A roll-top that’s seen better days
- Lots of chips and rust spots
Before you book anyone
- What happens if the damage is worse than the pictures show
- The length of the guarantee and what it covers
- Who will actually do the work
- How soon you can use it again
About our accreditations · Every repair comes with a one-year guarantee.
