Cambridgeshire · England
Bath re-enamelling & resurfacing in Coates, Cambridgeshire
Full bath re-enamelling and resurfacing at your home in Coates, with a one-year guarantee on every repair.
- Resurfacing from £350
- Chips and rust in more than one place
- A bath in a colour that no longer suits
Your questions about bath re-enamelling in Coates
Will there be fumes?
Some odour is normal while we spray, so we ventilate the room. It clears as the finish cures.
I’m a tenant. Can you help?
Of course. Check with your landlord; we can send the quote to them too.
Will the price change on the day?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
Is it OK to have pets in the house?
On the day, the room should be kept clear of pets and children, so the repair isn’t disturbed while it cures.
Can you quote from photos?
Normally, yes. Clear photos let us give you a fixed quote without visiting.
Do you need to take the bath out?
Not at all. We work on the bath in place, with the room masked and ventilated.
How long does re-enamelling take?
Usually one day, with the bath ready the next day. A badly pitted bath can need a second day.
When can you do it?
It depends on the time of year and where you are. We will offer you dates when we send your quote.
Bath re-enamelling in Coates without replacing anything
When a bath is structurally fine but worn out on the surface, re-enamelling is normally the most cost-effective option. It avoids removal, plumbing and re-tiling. Whether it’s several chips and rust patches and thin, worn enamel in places, we can help.
The work is covered for a year after we finish. If anything isn’t right, ring us and we will sort it.
- Area
- Coates (PE7)
- Area hub
- Cambridgeshire
- Guarantee
- A year, on every repair
- Price
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Covering Coates
Coates is about 2 miles east of Whittlesey, in Cambridgeshire. Anywhere in PE7, a technician comes to you. Coates is one of 371 places in Cambridgeshire we cover. Our jobs stretch from Coates to London (73 miles away).
Postcode districts we cover here: PE7. That includes homes on Barnfield Gardens, South Green and Nobles Close and the roads around them. We also travel to Oldeamere (1 mile south), Eldernell (1 mile north-east), Eastrea (1 mile west), Turves (2 miles east) and Westry (6 miles east). Within a short drive, we also cover Wisbech (12 miles north-east), Chatteris (9 miles south-east), Yaxley (8 miles west), Ramsey (8 miles south), Sawtry (12 miles south-west) and Alconbury Weald (15 miles south-west).
What’s near Coates
Typical jobs here are in homes near Coates Primary School, Nags Head pub and Sir Harry Smith Community College and the streets around them. The nearest railway station is Whittlesea station, roughly 2.1 miles south-west of the centre. Not far away are Lattersey.
What bath re-enamelling costs
Resurfacing from £350. There’s no charge for travel to Coates. The price depends on:
- The material
- How hard the colour is to match
- The size and number of damaged areas
- Access to the area
There are no surprise extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Quotes from your photos
A couple of clear pictures is all it takes. Try to include:
- Whether it’s been repaired or coated before
- One picture of the whole bath
- Natural light rather than flash
- A coin beside the damage so we can judge size
To get a price, send a couple of pictures using our quote form or ring us. We will say immediately whether it can be repaired.
What happens on the day
When we visit, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. Expect it to take most of the day. We clean up when we are done and tell you when it’s ready to use.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
Before we arrive
- Ensure the area is dry
- Keep pets and children out of the room while we work
- Let us know which floor the room is on
Get a quote
There’s no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Advice
Also in Coates
DIY kit or professional repair?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
Why repair rather than replace?
Getting a cast iron bath out is hard work: they’re heavy, often need breaking up, and a new one isn’t cheap. Resurfacing in place avoids that entirely. Prices start from £350. A repair is priced on what needs doing, not where you live. The full price is agreed before you book, with no extras added later.
Why choose Surface Doctor in Coates
- CHAS, Constructionline and SafeContractor accredited
- A year’s guarantee on all work
- One visit for most repairs
- Dust sheets down, tidy finish
Take a look at our pricing and guide to resurfacing and replacement costs.
Landlord and trade work in Coates
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Common problems we fix in Coates
In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.
If you can see any of these, send us a picture:
- Worn patches where water runs and sits
- A coating lifting around the plughole
- Stains that will not shift
- An outdated colour you’d like to change
Questions to ask before you book
- Who will actually do the work
- What protection goes down before work starts
- How long the guarantee is and what it covers
- What prep work is covered
Keeping it looking good
To keep it looking its best:
- Wash away dyes and oils after use
- Never use suction bath mats
- Leave the bath for the full curing time before using it
- A dripping tap should be fixed promptly
Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. It’s simpler to resurface before they spread.
Repairs by material
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is what we repair.
About our accreditations · Every repair comes with a one-year guarantee.
