Bridgend · Wales

Bath Re-enamelling for Coity homes

Local bath re-enamelling for Coity: photo quotes, tidy work and a year’s guarantee.

  • Resurfacing from £350
  • Worn patches where water runs and sits
  • Enamel that is lost its shine and feels rough
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling for Coity homes

Bath re-enamelling at your home in Coity

The bath stays where it is, so the taps, tiles and plumbing aren’t touched. It normally takes one visit, and can be used again the day after. Whether it’s brown or grey marks that don’t clean off and worn patches where water runs and sits, we can help, whatever the material.

The work is covered for a year after we finish. If anything isn’t right, ring us and we will sort it.

Location
Coity (CF35, CF31)
County
Bridgend
Cover
One year on every repair
Price
From £350. Fixed and free, based on photos
Phone
0345 017 0787
Page updated
23 October 2026
Stained basin resurfaced to clean white (before and after)

Repairing versus replacing in Coity

Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Our bath re-enamelling starts from £350. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.

Why Coity customers choose us

  • Repair technicians who travel to you, UK-wide
  • One-year guarantee on every repair
  • CHAS and Constructionline accredited
  • Free fixed quotes from pictures

See our pricing or bath cost comparison.

Keeping it looking good

To keep it looking its best for years:

  • Stick to gentle, non-abrasive cleaners
  • Get any chip repaired quickly
  • Don’t use the bath until it has fully cured
  • Fix dripping taps quickly

Rinse the bath and wipe it over after use, especially in hard water areas, so limescale can’t build up.

The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Acting earlier keeps the preparation simpler.

How we price bath re-enamelling

Prices start from £350. We do not charge extra for travel to Coity. The price depends on:

  • How many items we do on one visit
  • How much damage there is
  • The colour and finish to match
  • The material and finish

The price depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. We give a fixed quote from your photos, so you know the cost before booking.

How to get a fixed quote

It only takes a minute to photograph the damage, and it saves a visit. Please include:

  • A coin beside the damage so we can judge size
  • Details of any past repairs
  • What it’s made of, if you know
  • Good light, ideally daylight, without flash glare

The quickest way to a price is to send a couple of pictures using our quote form or ring us. We will tell you honestly whether it can be repaired.

Common questions in Coity

Is there a smell?

Yes, while we’re applying the finish. We set up ventilation and the smell fades as it cures.

Do you charge for travel?

We do not add a call-out fee. The fixed price covers the visit and the work.

How durable is a resurfaced bath?

Look after it and it lasts. Gentle cleaning, no suction mats.

Do you need to take the bath out?

Not at all. Everything is done in your bathroom, with the room protected and ventilated.

Can you do more than one item on the same visit?

Of course, and it usually saves money. Send pictures of everything together and we will quote them together.

Can I get a quote without a visit?

Yes, almost always. Clear photos let us give you a fixed price without visiting.

How do I get a price for bath re-enamelling in Coity?

Prices start from £350. Every job gets a fixed quote based on photos of the damage. Send a close-up of the damage and a wider photo with your CF35 postcode.

Do you work in Coity?

Yes. We cover the entire UK and come to Coity and the rest of Bridgend. Send photos and we’ll quote, or call 0345 017 0787.

Work for landlords and builders

Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.

Hospitality businesses cannot afford rooms out of action for long, so we keep visits short and tidy. We’ll fit around changeovers where we can.

Different materials, different repairs

Pressed steel

Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.

Cast iron

Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.

Common problems we fix in Coity

Frequently the bath has just had decades of use. Underneath, a cast iron or steel bath is generally as strong as ever.

Send us a photo if you notice any of these:

  • An outdated colour you’d like to change
  • Wear marks under the taps
  • A bath that stays dull however much you clean it
  • Brown or grey marks that do not clean off

Before you book anyone

  • How your room will be protected
  • How long it needs to cure
  • How long the guarantee is and what it covers
  • If travel is included in the price

How to compare quotes

Our work in Coity

Coity is about 1 mile north-east of Bridgend, in Bridgend. Jobs in Coity are booked in like any other job: a fixed price from your photos, then a visit to do the work. Our repair technicians cover 91 places in Bridgend, from the larger towns to small villages.

We work across CF35 and CF31. From Main Avenue, School Road and Cae Rhedyn or anywhere nearby, a technician can come to you. If you’re just outside Coity, we cover Coity Higher (1 mile north), Byeastwood (1 mile north-east), Brackla (1 mile south), Pen-yr-heol (1 mile north) and Pen-dre (1 mile west). Within a short drive, we also cover Maesteg (7 miles north-west), Porthcawl (7 miles west), Pyle (6 miles west), Cornelly (7 miles west), Gogledd Corneli (6 miles west) and Garth (7 miles north-west).

Local landmarks in Coity

Locally, our jobs take us to homes close to Archbishop McGrath Catholic High School, Six Bells Inn and Archdeacon John Lewis, among other places. Coity’s nearest station is Wildmill station, roughly 1.2 miles west. Nearby you will also find Coity Castle (within half a mile north-west) and Designer Outlet Bridgend (1.3 miles north-west). Not far away are Brackla Hill.

Map of Coity © OpenStreetMap contributors

What happens on the day

Visits start with a quick look at the job together, so you know exactly what we’re doing. Next, we cover and mask everything nearby and the work begins. You can expect it to take the best part of a day.

  1. First we protect the bathroom and set up ventilation.
  2. We clean and degrease the bath and repair any chips or rust.
  3. We key the surface and put on a bonding primer.
  4. We spray on the new enamel finish in several coats.
  5. The bath is left to cure and can usually be used the next day.

Getting ready for the visit

  • Move bottles, mats and clutter away from the area
  • Point us to the nearest place to park
  • Keep children and pets away from the room on the day

Get a quote

Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them to us. What comes back is a fixed quote, not a guess.

Get a free quote

Advice

Should I try a DIY kit first?

If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.