Lancashire · England

Bath re-enamelling & resurfacing in Cold Cotes, Lancashire

Full bath re-enamelling and resurfacing at your home in Cold Cotes, with a one-year guarantee on every repair.

  • Resurfacing from £350
  • Lots of chips and rust spots
  • A period or roll-top bath worth keeping
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling for Cold Cotes homes

When a repair isn’t the answer

Some problems need a builder, plumber or fitter rather than us:

  • A poorly supported acrylic bath, until it’s firmed up
  • Plumbing leaks, which need a plumber
  • Problems we cannot see until an old finish comes off

Send us photos and we will tell you honestly.

Surfaces we repair

  • Victorian roll-tops
  • Pressed steel baths
  • Cast iron baths
  • Acrylic baths
  • Basins & shower trays

About our bath re-enamelling in Cold Cotes

Many of the baths we re-enamel are period roll-tops, which are heavy, hard to move and costly to replace. Doing them in place keeps an original feature. We work on pressed steel baths, acrylic baths and basins & shower trays, and common reasons people contact us are a peeling or bubbling previous coating and a period or roll-top bath worth keeping.

The work is covered for a year after we finish. Just call us if there’s a problem and we will sort it.

Surface Doctor technician refinishing the outside of a roll-top bath
Where
Cold Cotes (LA2)
Area hub
Lancashire
Warranty
A year, on every repair
Price
From £350. Free and fixed, from your pictures
Telephone
0345 017 0787
Page updated
23 October 2026

DIY repairs versus a professional job

You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.

FAQs for Cold Cotes

Which areas do you work in?

Across the UK. Our prices are the same everywhere.

Can pets and children be at home?

Yes, as long as they stay out of the room we are working in. We will let you know when it’s safe to use again.

Can I get a quote without a visit?

Typically, yes. A close-up and a wider photo are enough to give a fixed quote.

Is there a guarantee?

Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.

Does the bath have to be removed?

No, it stays where it is. We work on the bath in place, with the room protected and ventilated.

I rent my home. Can I book you?

Yes. Ask your landlord first, and we can send them the quote if that helps.

Can I add another job to the visit?

Yes, and it’s frequently cheaper. Just add the extra items to your pictures and you will get one combined price.

Can you make a coloured bath white?

Yes, most people go for white. Mention the colour you want when you send photos.

When to call us in Cold Cotes

Older baths often have several problems at once: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.

Get in touch if you’ve noticed any of these:

  • Several chips and rust patches
  • A period or roll-top bath worth keeping
  • A coloured bath you want in white
  • An old resurfacing that is failing

Comparing quotes

  • How changes to the job are handled
  • How to care for the finish
  • Whether a trained technician does the job
  • Whether the colour is mixed to match

Choosing a repair company

What happens on the day

Nothing needs to be moved out of the room. Everything we use comes in the van with us, put protection down and get going once we have agreed what we’re doing. It generally takes most of the day, and you can get on with other things while we are there.

  1. We sheet, mask and ventilate the room.
  2. Old sealant is cut out and the bath is deep cleaned.
  3. Chips, rust and pitting are repaired.
  4. The surface is keyed and primed for the new finish.
  5. Several coats of finish are sprayed on, then it cures until the next day.

How to prepare

  • Have a window or extractor fan available
  • Let us know about parking or access
  • Avoid using the area for a few hours before we arrive

Get a quote

To get a price, send a couple of photos through our quote form or call us. We will say right away whether it can be repaired.

Send pictures for a quote

Related advice

Covering Cold Cotes

Cold Cotes is about 16 miles east of Lancaster, in Lancashire. Customers in Cold Cotes get the same service as everywhere else we cover: a fixed quote from photos, and a technician at your door on the day. Cold Cotes is one of 482 places in Lancashire we cover. Our jobs stretch from Cold Cotes to Leeds (42 miles away).

Our visits in LA2 are booked in the same way as anywhere else. Close by, we cover Newby (1 mile south-east), Ingleton (2 miles north-west), Clapham (2 miles south-east), Mewith Head (3 miles south) and Keasden (3 miles south). Within a short drive, we also cover Carnforth (14 miles west), Bolton-le-Sands (15 miles west), Caton (12 miles west), Cragbank (14 miles west), Kirkby Lonsdale (8 miles north-west) and Hest Bank (15 miles west).

Around Cold Cotes

Cold Cotes’s nearest station is Clapham (North Yorkshire) station, roughly 2.3 miles south-east. Open spaces near Cold Cotes include Constitutional.

Map of Cold Cotes © OpenStreetMap contributors

Keeping it looking good

So the finish stays in good condition:

  • Store bottles off the bath
  • Do not use the bath until it has fully cured
  • Repair dripping taps early
  • Don’t let dyes or oils sit on the finish

Stick to mild, non-abrasive cleaners, avoid suction bath mats, and don’t leave bottles or razors standing on the surface.

Don’t try to scrub a worn bath back to shine. It removes more of the surface and makes resurfacing more work.

Should you replace it?

For a sound bath, resurfacing costs far less than replacement, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s also far quicker. Resurfacing from £350, with every job priced individually. Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.

Why Cold Cotes customers choose us

  • Everything repaired in place
  • Fixed prices from your pictures
  • Generally one visit, start to finish
  • CHAS and Constructionline accredited

Take a look at our pricing and bath cost comparison.

How we price bath re-enamelling

Resurfacing from £350. We charge the same across the UK, including Cold Cotes. The price reflects:

  • Whether it’s a chip, crack, burn or wear
  • How much damage there is
  • How hard the colour is to match
  • The material

Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.

How to get a fixed quote

Good photos mean an accurate price. Here’s what helps:

  • Natural light rather than flash
  • A wider photo showing the whole bath
  • Details of any past repairs
  • Any details about the material

Email us photos of the damage and a wider shot of the whole item, and tell us you’re in Cold Cotes, and we’ll come back with a fixed quote.

Landlord and trade work in Cold Cotes

We regularly work with letting and managing agents. Send the address, pictures and access details.

For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.