Lancashire · England
Bath re-enamelling & resurfacing in Ingleton, Lancashire
Full bath re-enamelling and resurfacing for homes and businesses in Ingleton and across Lancashire. Send pictures for a free, fixed quote.
- Resurfacing from £350
- A roll-top that is seen better days
- Worn patches where water runs and sits
About our bath re-enamelling in Ingleton
The bath stays where it is, so the taps, tiles and plumbing aren’t touched. Most baths are done in one visit, with the bath ready to use the following day. Whether it’s lots of chips and rust spots and a dull, rough surface that won’t come clean, we can help.
Every job is backed for twelve months in Ingleton and everywhere else. We return to put right any problem with the work.
- Where
- Ingleton (LA6)
- County
- Lancashire
- Guarantee
- One year on every repair
- Quote
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
What a repair can’t fix
We’ll always be straight with you, so here’s what a repair can’t fix:
- Leaking taps or wastes (a plumber’s job)
- Steel that has corroded right through
- A poorly supported acrylic bath, until it’s firmed up
Send us photos and we’ll tell you honestly before booking.
What we work on
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
Prices and what affects them
Prices start from £350. We give every job a fixed price from photos. This is what makes a difference:
- The colour and finish to match
- Whether it’s a chip, crack, burn or wear
- The material and finish
- Previous DIY repairs that have to come out
We do not add extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Send photos for a quote
Good pictures mean an accurate price. Here’s what helps:
- Any earlier repairs or coatings
- A coin beside the damage so we can judge size
- Good light, ideally daylight, without flash glare
- The postcode, so we can plan the visit
There is no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will reply with a fixed quote.
What we are called out for in Ingleton
Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. We strip what’s failing and start again.
Signs it’s time to call us include:
- An outdated colour you’d like to change
- Several chips and rust patches
- An original cast iron bath that needs restoring
- A dull, rough surface that will not come clean
Questions to ask before you book
- How your room will be protected
- What aftercare is recommended
- Whether the price covers travel
- What the guarantee covers, and for how long
How the visit works
Nothing needs to be moved out of the room. We bring everything we need with us, lay protective sheets and get going once we’ve agreed what we’re doing. It generally takes most of the day, and you’re welcome to carry on with your day while we work.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
How to prepare
- Clear the area around the damage
- Mention if the room is upstairs or in a flat
- Mention any parking restrictions or tricky access
Getting a price
Pricing is simple: snap the damage close up and then the entire item, send them to us with your postcode, and we will reply with a fixed price. There is no charge for the quote and you are under no obligation.
Advice
Towns and villages near Ingleton
More services for Ingleton
How to look after the repair
Nothing complicated is needed:
- Respect the curing time we give you
- Avoid suction-cup mats
- Store bottles off the bath
- Don’t let dyes or oils sit on the finish
Rinse the bath and wipe it over after use, particularly where water is hard, so limescale cannot build up.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Resurfacing sooner means less repair work first.
Should I try a DIY kit first?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and do not use it until it has fully cured. If it fails, we can still put it right.
Repairs by material
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Your questions about bath re-enamelling in Ingleton
I’m a tenant. Can you help?
We’re happy to deal with the tenant, landlord or agent. Just ensure the landlord agrees.
Do I need to be at home?
Someone needs to let us in and show us the job. You don’t need to watch us work.
Can you redo someone else’s repair?
Most of the time. Tell us what was done before.
Does the bath have to be removed?
No. It’s re-enamelled where it stands, so nothing else is disturbed.
What happens next?
We review the pictures and send a fixed quote.
Can you quote from pictures?
In nearly every case. If photos do not show enough, we will ask for another angle.
Do you work for landlords and businesses?
Yes, often. We quote for multiple addresses and fit around tenancy changeovers.
How soon can you come?
Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.
Covering Ingleton
Ingleton is about 15 miles north-east of Lancaster, in Lancashire. We visit customers in Ingleton and the surrounding area, so you don’t need to take anything anywhere. We work in all 482 towns and villages in Lancashire. You can also see our page for Leeds, about 44 miles away.
Every address in LA6 is within our area, from the main roads to the quietest streets. From Main Street, High Street and The Square or anywhere nearby, we can come to you. We also travel to Cold Cotes (2 miles south-east), Burton in Lonsdale (3 miles west), Newby (3 miles south-east), High Bentham (3 miles south-west) and Ireby (3 miles north-west). Further out, we also cover Lancaster (15 miles south-west), Carnforth (12 miles west), Bolton-le-Sands (13 miles west), Arnside (15 miles west), Caton (11 miles south-west) and Cragbank (13 miles west).
Around Ingleton
Our customers here include homes close to Ingleton Primary School, Church of St Mary the Virgin and Marton Arms Inn and the streets around them. For rail, the closest station is Bentham station, about 2.9 miles south-west of the centre. Green spaces nearby include Constitutional.
For landlords and businesses
Letting agents frequently send us pictures straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
About our accreditations · Every repair comes with a one-year guarantee.
